Search:

Type: Posts; User: Grunt1775

Search: Search took 0.14 seconds.

  1. Replies
    2
    Views
    347

    [Error Code] Re: MX-6580 L8-20 code

    Tried replacing the LSU assy. Still getting the L8-20. Has anyone seen this issue before?!
  2. Replies
    2
    Views
    347

    [Error Code] MX-6580 L8-20 code

    Techs have updated firmware, replaced both Main Control and MFP Scanner Mother pwb's, as per the Service Manual. I've scanned this Forum for the code, but only found 'older' models that reflected...
  3. Replies
    11
    Views
    618

    [Misc] Re: Operation disabled

    Yes, sorry....I did 62-11 actually. Fat fingered! Doc Filing Data clear.
  4. Replies
    11
    Views
    618

    [Misc] Re: Operation disabled

    Ran Sim 63-11 to clear the document filing data. Performed the Dip Sw again, Sorry it did not work. Thanks for the effort!
  5. Replies
    11
    Views
    618

    [Misc] Re: Operation disabled

    I reset the Admin password thru the 'Dip Sw' setting for 24-30, which was successful on screen, but still would not let me Login admin without getting the 'Operation Disabled' message still. I...
  6. Replies
    11
    Views
    618

    [Misc] Re: Operation disabled

    I canít access the machine settings from either the Webb or on the panel.
    Replacing the MFP pwb, CF Rom, and Flash did nothing for the issue except fix the link lite issue. Storms came through...
  7. Replies
    11
    Views
    618

    [Misc] Re: Operation disabled

    Cannot get into settings canít web into machine
  8. Replies
    11
    Views
    618

    [Misc] Operation disabled

    I have a Sharp MX 3640 giving a message "Operation is Disabled. Please see your administrator". I cannot web into machine. Screen will not change from this message. I've replaced the MFP pwb...
  9. Replies
    4
    Views
    2,073

    [Misc] Re: Biz 25 Lamp Error

    No, I did not replace the ribbon cable....will give it a try.
  10. Replies
    4
    Views
    2,073

    [Misc] Re: Biz 25 Lamp Error

    The scanner will move normally and lite up for the scan.
  11. Replies
    4
    Views
    2,073

    [Misc] Biz 25 Lamp Error

    There is an Image using ADF, No image when using original on glass. Have already replaced CCD, lamp assy, Overall control pwb, scanner pwb, and updated firmware.
Results 1 to 11 of 11