Search:

Type: Posts; User: SwanyG

Page 1 of 2 1 2

Search: Search took 0.06 seconds.

  1. Replies
    1
    Views
    29

    Canon IR 3300 Mirror Pulley Replacement

    The part that broke on this IR 3300 is the scan pulley for the mirror ass'y... part number FB5-5226-000.

    43124
    I can't find the part anywhere and don't even have a parts machine to pull it from....
  2. Replies
    2
    Views
    441

    Sharp MX-3070 password changed

    This machine has the MX-FR52U Data Security Kit installed and the Password has been changed. Sim 24-30 is not an option and the only dip switch on the main board is for the screen calibration. I...
  3. Replies
    3
    Views
    551

    Ricoh AF MP-C2051 High frequency noise

    This is the second MP-C2051 I've seen this on. The noise is only during the copy cycle and it seems to be coming from the lower rear of the machine. I've taken the covers off and the noise is loudest...
  4. Replies
    12
    Views
    1,423

    Re: KM-4050 new drum with background

    Thank you everyone for the assist on this problem.

    I tried many times and simply could not get the new charger to set down properly on the front end. It was obvious in looking at the slotted screw...
  5. Replies
    12
    Views
    1,423

    Re: KM-4050 new drum with background

    I'm headed back out with the original charging ass'y. What you're describing makes sense in that the charger is too far from the drum on the front since the problem is worst at the front and gets...
  6. Replies
    12
    Views
    1,423

    Re: KM-4050 new drum with background

    Thank you "The_Murph"

    Am I out of luck or will it reset on power down and reset?

    Does this machine adjust the voltage with the age of the drum? Or could it be something as simple a a drum blade...
  7. Replies
    12
    Views
    1,423

    KM-4050 new drum with background

    I scratched the drum with only 70,000 pages on it so I ordered a new maintenance kit and replaced only the drum and charger.

    The drum doesn't seem to be cleaning and I'm wondering if it's because...
  8. Re: Ricoh AF 2035 Add Toner/ No Toner won't clear...

    Thank you for your replies. I stopped back and went to sp 2208. Only option was "0" so I changed it to "1". I think I locked it in with #/enter key, is that correct? No change.

    I should be more...
  9. Ricoh AF 2035 Add Toner/ No Toner won't clear...

    The customer replaced the toner bottle with an OEM toner that was malformed at the end so that the toner motor couldn't grab and rotate it. I was able to get a different bottle in and turning fine...
  10. Replies
    7
    Views
    695

    Re: Ricoh Aficio 2035

    Dark band on the back of the copy LEF is usually bad developer.
  11. Re: Canon IC MF8580Cdw How do I remove the transfer belt ass'y

    I agree. That being said, the customer told me that the problem persists even after they change out the toner/drum ass'y. I cleaned the transfer belt both with the menu option as well as a physical...
  12. Re: Canon IC MF8580Cdw How do I remove the transfer belt ass'y

    I believe I have an answer for my earlier post and thought I'd share it:

    This machine crosses closely to the HP Color LaserJet CP 2025. I was able to find a Youtube video describing how to do...
  13. Canon IC MF8580Cdw How do I remove the transfer belt ass'y

    Customer complaining of dark streaks... I determined that the transfer belt appears to be the problem. I'm ordering belt ass'y but I have no idea on how to get the transfer belt ass'y out! Any help...
  14. Replies
    1
    Views
    500

    [Error Code] Magicolor 2530DL Code: 14H

    What I've seen about this code tells me that there's not pressure from the second transfer roller (not exact quote) but I've seen no suggestions on how to resolve this issue. Is this problem from the...
  15. Replies
    2
    Views
    3,438

    Recommendations for a good small scanner?

    I need a scanner for my personal use. I don't have a great deal of room on my desk but would like a decent small scanner for not a lot of money. In doing copier/printer repair, I notice a lot of...
  16. Replies
    2
    Views
    1,153

    Incorrect size/setting on MF8350Cdn... HELP!

    This customer can print to their Canon ImageClass MF8350Cdn and it might go 2 pages or 25 prints before it stops printing and displays "incorrect size/setting". It can be forced past it (for a few...
  17. I need the sep pad for Doc Feeder MR-3016 (ADF for eStudio 230)

    I'm looking for the plastic piece (held down with two screws) that sits in front of the sep roller on the document feeder. This part has a mylar that sits on top of the sep roller as well as a rubber...
  18. Replies
    6
    Views
    3,306

    Bizhub C35 imaging unit won't reset

    My customer ordered a yellow imaging unit for their Bizhub C35 and installed it but the machine didn't reset. I went out and replaced the chip (twice) and it still won't reset. Their machine is down...
  19. Replies
    3
    Views
    768

    Re: Need Firmware and instructions SCX-6345N

    daniel411, thank you for the reply. The scanning is not working and if a firmware update doesn't fix it... I need to replace it. So this is a last ditch effort.
  20. Replies
    3
    Views
    768

    Need Firmware and instructions SCX-6345N

    I have an SCX-6345N which has never had a firmware upgrade and I'm afraid it's time... This makes me QUITE nervous since I know it can lead to a dead machine but if I do the sequence properly, it...
  21. Ricoh SP 5210SR "processing" message while scanning

    This message locks up machine. They cycle power and it works for awhile. Any ideas?
  22. Replies
    1
    Views
    351

    Simple Scanning from SCX-6345

    I'm looking for a simple way to set a customer up with scanning from his Samsung SCX-6345 to a single PC. I set up NetScan for him but it's asking for login and password on the copier display and...
  23. Replies
    5
    Views
    636

    [Misc] Re: Panasonic Parts for Panafax UF 8000

    Thank you for that... yes those are the part numbers I had as well but I was hoping to find someone to order them from rather than Precision Roller as they also have to get them from a Panasonic...
  24. Replies
    5
    Views
    636

    [Misc] Panasonic Parts for Panafax UF 8000

    I have a customer with a Panafax UF 8000 and I need to order parts for the ADF (Feed, Sep, Pickup). I don't have a source for this and was wondering if anyone would direct me to a supplier. Your help...
  25. Replies
    6
    Views
    1,416

    [Misc] Re: SCX-5935 LSU Replacement

    Sorry to be slow to respond. The reason I'm replacing this laser ass'y is due to a noisy scanner motor. When I ran the motor in diagnostics it was definitely the problem. I'm not looking forward to...
Results 1 to 25 of 39
Page 1 of 2 1 2