Search:

Type: Posts; User: ntbann

Page 1 of 10 1 2 3 4

Search: Search took 0.13 seconds.

  1. Re: 5052ci - Possible To Increase "Folding Pressure" of BF-730 Booklet Folder?

    I have made new stronger springs from some stock I had in the shop. Worked good for a flatter fold. You may be able to cut a loop out of the existing spring as well.
  2. Thread: MX-C300w

    by ntbann
    Replies
    8
    Views
    453

    Re: MX-C300w

    Did you try to change the IP to a different one?
  3. Thread: TA3232

    by ntbann
    Replies
    8
    Views
    355

    Re: TA3232

    I think what Im looking for has to do with prescribe commands. The sharp can have a document loaded into the print driver then when selected it prints it on top of the document they are printing.
  4. Thread: TA3232

    by ntbann
    Replies
    8
    Views
    355

    Re: TA3232

    Sorry TA3252
  5. Thread: TA3232

    by ntbann
    Replies
    8
    Views
    355

    TA3232

    I have a customer that we installed a new TA3232. There old machine was a sharp that they were using overlays for there letter head. Does any one have a suggestion on how to do this on a Kyo?
  6. Re: Kyocera Taskalfa 6550ci exit unit motor stalls

    Did you test the sensors?
  7. Replies
    20
    Views
    2,725

    [Misc] Re: Kyocera Setup Tool

    You can download the setting from KFS then convert them for the new machine. You don't have to see both machines that way.
  8. Re: Kyocera Taskalfa 6550ci exit unit motor stalls

    That code is for fuser exit jam. Probably would take a look at that.
  9. Replies
    4
    Views
    1,104

    Re: MX2640 slow touchscreen response.

    Had a MX4141 display lagging and clearing out the job log in the web interface solved it.
  10. Thread: Sharp MX 6000

    by ntbann
    Replies
    2
    Views
    868

    Re: Sharp MX 6000

    It looks like it needs to be calibrated.
  11. Replies
    8
    Views
    429

    Re: KFS Mobile - No devices found

    Yes. Good for an occasional firmware upgrade but not much else.
  12. Replies
    8
    Views
    429

    Re: KFS Mobile - No devices found

    It does not. It only syncs with a machine that is plugged directly into your phone.
  13. Replies
    8
    Views
    429

    Re: KFS Mobile - No devices found

    56? i was thinking more like 16kbs. And don't get me started on tech bulletins!
  14. Re: Brother intelifax 4750e / 4100e document CIS needed

    precision roller has them.
  15. Replies
    4
    Views
    1,174

    Re: 4002i warning low memory

    We just had one with the flashing memory light. It turned out to be an old TA3050 driver being directed to the new printer. Changed to correct driver and all is good.
  16. Replies
    4
    Views
    347

    Re: Kyocera 3010I doc. feeder troubles..

    Just had one that the post snapped off the lift plate. Not a good design.
  17. Thread: Taskalfa 8001i

    by ntbann
    Replies
    7
    Views
    825

    [Error Code] Re: Taskalfa 8001i

    I was joking. We dont write dates like that here.
  18. Thread: Taskalfa 8001i

    by ntbann
    Replies
    7
    Views
    825

    [Error Code] Re: Taskalfa 8001i

    That date hasnt happened yet.
  19. Replies
    3
    Views
    457

    [Misc] Re: Kyocera M5521CDW

    I don't see yellow. Looks like you have a charge roller arching to the drum.
  20. Thread: 8001i J42xx

    by ntbann
    Replies
    12
    Views
    1,232

    Re: 8001i J42xx

    Are your machines networked? We have a bunch of 8001i at a school district. We were thinking its a bad print job causing the exit unit to continually run in reverse.
  21. [Misc] Re: SHARP 7580 pulling in multiple pages at a time scanning

    What if they feed the pages in Letter R with the stapled corner not in the feed throat?
  22. Replies
    4
    Views
    412

    Re: make 2 start buttons

    Why do you care if the scan in color?
  23. Replies
    5
    Views
    487

    Re: Looking for Thermal printer A4

    What is the purpose for this?
  24. Replies
    19
    Views
    2,765

    Re: Charge Roller Change (Finally !)

    We use Minolta rollers. They last a lot longer.
  25. Re: CS-8001i C 9070 after Firmware Update (V 6.02)

    We had to get special firmware from kyo as back dating firmware did not work.
Results 1 to 25 of 244
Page 1 of 10 1 2 3 4