Search:

Type: Posts; User: Hansen88

Page 1 of 9 1 2 3 4

Search: Search took 0.17 seconds.

  1. Replies
    7
    Views
    501

    [Misc] Re: how to tell photocopier is new

    Yes,they dont come ready to copy straight out of the box. Also saved you having to throw out big cardboard boxes and a bunch of styrofoam.The machine needs to be assembled, supplies put in,...
  2. Re: Sharp MX M503N fuser web question and 25-2 dev calibration question

    I have seen those collars on the web before. Like you said the new web rollers are not made so you can use the collars. I throw them out and I have not had any problems from not using them.
  3. Replies
    9
    Views
    535

    Re: MX B402SC Duplex Jams are back!!

    I had the problem of the finnisher mounting plate installed wrong. There is not a lot of clearance between the top of the finnisner and the bottom of the scanner unit. If the finn mounting plate is...
  4. Replies
    8
    Views
    519

    Re: MX-503 multi sheet feeding

    I have not been back to customer yet,so nothing new to report. I am thinking maybe its their paper because the machine does not jam,so I dont think it is the sensors,although I will not rule them...
  5. Replies
    8
    Views
    519

    Re: MX-503 multi sheet feeding

    Thanks for the replies. The sensors I assumed were good mainly because I am not getting any jams. When you go through the papers that come out there will be some blank sheets mixed in. Maybe 2 blanks...
  6. Replies
    8
    Views
    519

    MX-503 multi sheet feeding

    Hello, This machine is multi sheet feeding from both tray 1 and 2. They both have new feed and separation rollers installed. I fanned and checked the paper,seems fine. I was thinking maybe it is the...
  7. Replies
    11
    Views
    2,355

    Re: MX-M503 fans cycling on/off a lot

    Just getting back about this problem. I dont have a real answer. Since the cust said this only started happening after their IT person changed the server and If I remove the network cord and the...
  8. customer gonna be doing a big printing,copying ans scanning job.

    Hello, I have this customer with a 6240 and for a client they are going to be doing a big job as listed in the title. The customer wants to be able to keep track of how many copies,scans,color,bk...
  9. Replies
    11
    Views
    2,355

    Re: MX-M503 fans cycling on/off a lot

    Thanks for the help Guys. I think I will be going there today,or tomorrow. When I get this resolved I will let you know what it was.
  10. Replies
    11
    Views
    2,355

    Re: MX-M503 fans cycling on/off a lot

    I didnt go to the customer today because I dont have any real soloutions yet,but I did talk to someone different on the phone. She gave me some different information that would have been nice to...
  11. Replies
    11
    Views
    2,355

    Re: MX-M503 fans cycling on/off a lot

    Our machine in our shop the little fan by the hard drive spins up high speed when a copy is made or that is the first thing you hear when a print job is sent to machine. The machine at the customer...
  12. Replies
    6
    Views
    1,527

    Re: Sharp mxm 264n

    I had one,same feeder but different machine doing that. I replaced the sensors even though they tested to be working. Did not fix. It ended up being the feeder control board.
  13. Replies
    11
    Views
    2,355

    MX-M503 fans cycling on/off a lot

    Customer complained about the fans comming on/off a lot. The fuser cooling fans seem normal. Low speed at idle,hi speed during operation. The small fan on the network board and also cools hard drive...
  14. Replies
    4
    Views
    992

    Re: Sharp MX-565N & Mobile hotspots

    We have connected to a wireless hotspot before but from a non wireless machine. We connected the machine to a wireless acess point bridge.The machine was in a job trailer so thats all they had was a...
  15. Replies
    1
    Views
    728

    HP M557 page count vs engine cycles

    Hello I dont work on many printers,mainly copiers. On the configuration report page it shows engine and color engine cycles but no page count. I read where engine cycles are for troubleshooting and...
  16. Replies
    13
    Views
    3,828

    [Jamming] Re: Sharp MX-2640N SPPD3_N Sensor Jamming

    I know this is old but I had a SPPD3_N jamming issue also and it turned out to be the doc feed board also.
  17. Replies
    4
    Views
    591

    Re: Developer Unit swap out Sharp MX 2700n

    I am not 100 percent shure about that model but on a lot of other color sharp models I have swapped the developers. On those I had to remove the bottom plastic base piece from the bad unit you have...
  18. Replies
    4
    Views
    394

    Re: MX 365 user control trouble

    .I will look into the clicks Mojorolla. I didnt think about that. I know they dont have 11x17 in any of the drawers but the copy limit is pretty low at 60 pages per month. One thing though is now she...
  19. Replies
    4
    Views
    394

    Re: MX 365 user control trouble

    I did not see this firsthand. I added myself to the user list,same group and all settings as all the rest and I could not make it stop short of the page limit.
  20. Replies
    4
    Views
    394

    MX 365 user control trouble

    Customer has a user group set up and it has page limit set for 60 copies. They say that users will get stopped out sometimes after 5or6 copies. I looked at the settings and I dont see anything that...
  21. Replies
    9
    Views
    747

    Re: Royal Imaging Toner experience?

    Basically we work mainly on Sharp and Toshiba so the toner would be for all models we have out.
  22. Thread: sharp mx5111n

    by Hansen88
    Replies
    4
    Views
    445

    Re: sharp mx5111n

    How did you try to set it up and what problem are you having?
  23. Replies
    9
    Views
    747

    Royal Imaging Toner experience?

    I dont think it is a good idea but my company is going to be switching to Royal Imaging BK and Color toner because of the cost savings. Does anyone out there have any experience with this company and...
  24. Replies
    0
    Views
    1,647

    sensor needed for MX-C300 sharp

    Hello, I am looking for duplex sensor CPWBF0191US56 for Sharp MX-C300 Thanks
  25. Replies
    4
    Views
    650

    Re: Sharp MX 363 Black dots on page

    If they are faint I have seen these machines overtone and cause problems like that.
Results 1 to 25 of 219
Page 1 of 9 1 2 3 4