Search:

Type: Posts; User: GeneOR95

Page 1 of 3 1 2 3

Search: Search took 0.04 seconds.

  1. Replies
    14
    Views
    971

    [Error Code] Re: Copystar CS 3511i with F010

    Glad you got it sorted out. Thanks for the update.
  2. Replies
    14
    Views
    971

    [Error Code] Re: Copystar CS 3511i with F010

    And this surprises you, how? For the most part they seem to be nothing more than script kiddies reading from prepared notes. I very seldom call them anymore unless I am looking for a good laugh.
    ...
  3. Replies
    14
    Views
    971

    [Error Code] Re: Copystar CS 3511i with F010

    I just got a TA-3212i (very close to the 3511) and tried it. If you leave the door open when you turn on the machine it warns you before it can run its self diagnostics. The touch screen appears...
  4. Replies
    14
    Views
    971

    [Error Code] Re: Copystar CS 3511i with F010

    Have you tried to format the SSD? Turn copier off, open front door, enter 10871087 repeatedly. It should enter maintenance mode. enter 024 and run format SSD. It should work, it can't hurt and as...
  5. Replies
    14
    Views
    971

    [Error Code] Re: Copystar CS 3511i with F010

    QR 2RH-0009(H210)

    66 Corrective measures for system error F010 System error F010 might occur if using a certain application. TO-17-219, FSIM-44, 2RH-10840 MAIN

    Always update to the...
  6. Replies
    47
    Views
    9,701

    Re: Kyocera - Fleet Services

    I don't know what you are doing but it does work with out any body deleting anything from KFS. I just did it yesterday afternoon. In every instance I have cleared a machine, it was on KFS in...
  7. Replies
    47
    Views
    9,701

    Re: Kyocera - Fleet Services

    I have performed this function on 30+ pieces of equipment and it has worked every time. I successfully removed the device from KFS completely, allowing me to register it like it was new out of the...
  8. Replies
    47
    Views
    9,701

    Re: Kyocera - Fleet Services

    I have done this numerous times and was able to register the equipment as new. You do not need the other dealer to do anything. We purchased quite a few Kyocera "Kick Off" machines that were on the...
  9. Replies
    47
    Views
    9,701

    Re: Kyocera - Fleet Services

    In U520 if you go to Setting: On/Off Config > and select off, Off Disables TDRS and allows you to re-register the device without any intervention from Kyocera. It resets the KFS status to factory...
  10. Replies
    6
    Views
    349

    [CQ] Re: Kyocera Scanner Pins KM-2560/3060

    9 35968110 STOPPER WIRE ASS'Y SP found on page 53 of the parts list (FIG. 26 Options 3 & Tools)
  11. Replies
    5
    Views
    339

    Re: FS-C8525MFP, "Maintenance Kit A"

    Primary Feed Unit 302K394480
    Do you need the manuals?
  12. Replies
    9
    Views
    451

    Re: TaskAlpha 3050 ci DP plate not lifting

    Because if the holder is broken the sensor does not send a paper present signal. If there is no paper the plate will not lift to feed paper it doesn't know is there.
  13. Re: Taskalfa 4820w printnet default admin user and password

    From the Kyocera manual, Print NET Enterprise-Admin OG, try;
    15. User Name and Password will be: User = Admin, Password = 12345qwerty
  14. Re: TASKalfa 5551ci - How to change service mode code SIM U010

    I have a friend who went to work as a Kyocera tech Rep. He will apparently never share this code because it seems that anyone caught revealing this code to anyone will immediately start looking for...
  15. Re: TASKalfa 5551ci - How to change service mode code SIM U010

    Setting the maintenance mode ID
    Description
    Sets the maintenance mode ID.
    Purpose
    Modify maintenance mode ID for more security.
    Method
    1. Press the start key.
    Setting
    1. Select [New ID].
    2....
  16. Replies
    5
    Views
    352

    Re: Ecosys M2540dw - parallel adjustment ?

    Nothing found in manuals, bulletins, QA's or on Astea but the only thing that comes to mind off hand is the scanner lamp ass'y. Is it square to the scanner frame or has it been jarred slightly askew?
  17. Replies
    3
    Views
    457

    Re: KIP 770 "attention required" message

    Solution found. When tech got back to account he asked customer if they had done anything to machine prior to error message appearing. Oh yeah, we ut a new roll of paper in. Tech checked and found...
  18. Replies
    3
    Views
    457

    Re: KIP 770 "attention required" message

    Excellent suggestions which were already made to the tech, however the client was closing and he didn't have time before they threw him out. We'll have to wait until he can go back for these...
  19. Replies
    3
    Views
    457

    KIP 770 "attention required" message

    I have a technician in the field who is reporting that he has a KIP 770 with a small "attention required" message in the lower corner of the screen without any other indication as to what the problem...
  20. Replies
    4
    Views
    996

    Re: taskalpha 5501 error c0620

    You need to run Maint Mode U671 and select "Recovery FAX DIMM". See Below;

    0620 FAX image DIMM error
    1. The Fax image DIMM has not been installed.
    2. Fax image DIMM access error.

    U671 Clear...
  21. Replies
    7
    Views
    1,870

    [Misc] Re: Kyocera Fleet Services

    Another unusual occurrence we have seen is a machine that worked flawlessly in the shop when set up, went offline when installed at the customer location. Their IT (outsourced) was the one who set...
  22. Replies
    1
    Views
    1,948

    Re: Kyocera KM-1850 parts

    I don't know of any KM-1850 model. Are you sure its not a KM-1650?
  23. Re: Is there difference between TECHNICIAN Manual versus Service Manual?

    The Technician Manual everyone refers to is actually called "HP Designjet L25500 printer series
    Maintenance and troubleshooting guide (first edition)" I have it. It is not the service manual.
  24. Replies
    1
    Views
    963

    [Error Code] Re: kyocera ecosys m2035dn

    F010 Control PWB
    Checksum error
    Control PWB Unplug the power cord from the wall outlet, and wait five seconds. then turn on the power switch.
    If not corrected, replace the control PWB and check...
  25. Re: Is there difference between TECHNICIAN Manual versus Service Manual?

    Yes, they are two different manuals. One is the basic service and parts manual the other is a more in depth Maintenance and troubleshooting guide.
Results 1 to 25 of 52
Page 1 of 3 1 2 3