Search:

Type: Posts; User: Arkynsaw

Page 1 of 2 1 2

Search: Search took 0.10 seconds.

  1. Replies
    0
    Views
    57

    500 Color MFP M570dn Noise

    Makes a rubbing noise while printing , tried hand rotating TD units and pulled ITB and hand rotated it , not conclusive . Cheated the front door and tricked TD locks , ran unit while watching , tried...
  2. Replies
    2
    Views
    197

    CS-3501i Intermittent C6610 code

    Fuser Release sensor error , error was present when I arrived and happened for me . Pulled the fuser unit and removed the fuser release motor and hand turned the release mechanism , it seemed to be...
  3. Replies
    2
    Views
    115

    CM 1312nfi MFP Light pages output

    Has plenty of ink , black is new , has light print quality for all colors . Ran demo pages and supply pages , all colors light , ran through a 2nd side to check for moisture in paper , still the same...
  4. Re: When I post it shows as "printable view" only .

    Well this one seems fine .
  5. When I post it shows as "printable view" only .

    I can not respond to my own posts , not sure if anyone can , did I accidentally set something incorrectly ? Not getting any responses to my question or views . In the HP forum , was for an HP...
  6. Replies
    0
    Views
    29

    CM 1312nfi MFP Light print

    Has plenty of ink , black is new , has light print quality for all colors . Ran demo pages and supply pages , all colors light , ran through a 2nd side to check for moisture in paper , still the same...
  7. Replies
    0
    Views
    4

    [CQ] CM 1312nfi MFP Light print

    Has plenty of ink , black is new , has light print quality for all colors . Ran demo pages and supply pages , all colors light , ran through a 2nd side to check for moisture in paper , still the same...
  8. Replies
    3
    Views
    350

    Laserjet Pro M402dn false Jams

    As per customer , machine will intermittently show a jam on the op panel , but paper has not moved from the cassette . They check the paper path and then close the machine up and go . Feed tires are...
  9. Re: HP Color Laserjet 2600n Poor print quality

    It was doing it before I started the job , the laser box seemed to seat fine when re-seated , I remember re-checking it to make sure it was flush with the case . The interior of the laser box looked...
  10. HP Color Laserjet 2600n Poor print quality

    Unit came in with poor print quality , looked mostly like the faint print from fouled laser mirrors . Remove and clean laser mirrors and rest of machine , reassemble and test op . Nice and dark now ,...
  11. Replies
    2
    Views
    655

    Re: Epson WF-R4640

    Thanks Phil B , I did receive the link and downloaded the file , will get a look see and try to reply here when I get to the end of it .
  12. Replies
    2
    Views
    1,097

    Re: Dell 5130cdn noise tray

    So , here is the story . It came down to 3 parts , after digging through the service manual . Either the Paper Feeder Assy , Drive Assy PH , or the cassette . Decided to try the Paper Feeder Assy 1st...
  13. Replies
    2
    Views
    655

    Epson WF-R4640

    Having print quality issues , not getting good fill on the nozzle check and getting black streaks with kind of a swishy look , not consistent , like crud on the underside of the printhead . Tried...
  14. Brother MFC 8480dn ADF print quality problem

    While using the ADF , the machine will sometimes make an odd noise and then output either blank or all black pages , only very intermittently . Ran the feeder in 08 mode , no noise , paper fed...
  15. Replies
    2
    Views
    1,097

    Dell 5130cdn noise tray

    When using tray 1 top cassette , machine makes a ratchety noise , sounds like gears slipping . This does not happen with the 2nd /lower cassette , it sounds normal . I could not swap the cassettes...
  16. Replies
    1
    Views
    516

    [Jamming] Pro 400 Color M451nw

    Jams at exit , consistently , about 2.25 inches out of exit rollers . Sensors seemed to test fine . Replaced the fuser unit which has the 2 exit sensors , still doing the same thing . All settings...
  17. Replies
    7
    Views
    1,151

    [Jamming] Re: Pro 400 Color M451nw

    Nope , sorry , did further check , no TM or RM only an SM and I have it , HP can be truly confusing the way they now deal with service info .
  18. Replies
    7
    Views
    1,151

    [Jamming] Re: Pro 400 Color M451nw

    Nope , only a service manual for this one ,I do know that in some cases there are TM ( Troubleshooting Manuals) and RM (Repair Manuals) But as far as i know , only a service manual for this one .
  19. Replies
    7
    Views
    1,151

    [Jamming] Pro 400 Color M451nw

    Stops at exit , just out of fuser , as if it never arrived at the sensor . Very low print count on unit . FW 20130815 . Press start for reports , service page , feeds as noted above and then says "...
  20. Replies
    4
    Views
    701

    Aficio MP C2500 Black toner pump

    I just ordered one of these from my vendor , when I opened the box there was a yellow substance on the pump and inside , just a small amount , it looked like yellow toner , suspect it may be a used...
  21. Replies
    1
    Views
    264

    Sharp AR M237 fed noise tray 2

    Noise in 2nd cassette unit , can put finger on end of paper feed shaft and feel a vibrarion when the noise occurs , can push down on the feed tire with finger while feeding and noise intensifies ....
  22. HP Officejet Pro x476dw MFP Duplex unit life

    The duplex unit has a cleaning assy as part of it , is there a known likely service replacement interval ? Machine I am working on has about 83 K pages on it , the duplex unit looks a bit full, but...
  23. Xerox Workcentre WC-4250 Hangs in Loop light prints

    Still vexing me . Problem had gone away it seemed , now it has returned . Prints look light , will sometimes stop mid run and idle , stopped at one point and said toner supply failed , checked both...
  24. Replies
    2
    Views
    385

    HP Designjet 500 Noise

    Makes very high pitched noise , but only when retracting paper as in "form feed and cut" . Noise does not happen when printing or forward feeding of paper . Not a whole lot of possibilities , maybe...
  25. Replies
    2
    Views
    651

    Copystar CS-3501i Duplex jams 4411

    Getting very intermittent Jam 4411 codes only on duplex pages , simplex is working fine . Doc Feeder finishes before jam occurs , so I assume it is not part of the problem . Machine has about 200,000...
Results 1 to 25 of 35
Page 1 of 2 1 2