Search:

Type: Posts; User: ps22sp

Page 1 of 2 1 2

Search: Search took 0.09 seconds.

  1. Replies
    2
    Views
    404

    Re: error code a02-509

    rz 390
  2. Replies
    2
    Views
    404

    error code a02-509

    master feeding sensor part number request
    thanks
  3. Replies
    1
    Views
    236

    Re: rz 390 master not feeding to print drump

    this is the part black disc broken
  4. Replies
    1
    Views
    236

    rz 390 master not feeding to print drump

    this happen making the new master ;
    error code : a05 303
    every time do a new job to print , we took out the old master from print drum ,and then machine make new master making procedure
    we took...
  5. timing for master removal and master feeding to the print drum

    is there any connection between master removal motor fg sensor and master feeding the the print drum
    any advice are welcome
    thanks
  6. Replies
    0
    Views
    1,739

    rZ master making problem

    after change rz 390 color try to use new ink .do test mode 881 884 ,enter enter enter test clamp open and close then 887 suppose ink pumb rotate and makedo master making , hear the master in the...
  7. Replies
    7
    Views
    725

    Re: hp 9040 n part needed

    fuser gear worn
    replace a refurbish fuser ,it work no noise found
  8. Replies
    7
    Views
    725

    Re: hp 9040 n part needed

    when warm up fuser warmup rg5-7789 gear push down touch blue jam clear knob gear ,and then drive the fuser gear to rotate
    noise come from rg5-7789 white gear and rg5-5700-000cn (blue jam clear...
  9. Replies
    7
    Views
    725

    hp 9040 n part needed

    did anyone have the part number hp 9040n


    the part is :gear to drive fuser ....gear needed
    thanks
  10. Replies
    1
    Views
    425

    riso rz 390 output problem

    the center area output image darker , uneven image shown
    any comment and advice are welcome
    thanks
  11. Replies
    2
    Views
    466

    Re: master making image not correct

    this happen only once model rz 390
    last time printed letter size 2up ,new job output on the master images correct but last time printed image also on the image , only one image appear , that...
  12. Replies
    2
    Views
    466

    master making image not correct

    master making : the image on master is correct , but found another file image found on master , that meas two image combine , another file image is last time printed , is still in memory ??
    is there...
  13. Thread: c3220 problem

    by ps22sp
    Replies
    2
    Views
    443

    Re: c3220 problem

    replace and swap two black robber roller of transfer belt , try to took out laset unit
    to see back panel dc controller board and pc main board.check the cable ,do nothing
    turn off the power from...
  14. Thread: c3220 problem

    by ps22sp
    Replies
    2
    Views
    443

    c3220 problem

    c3220 problem
    pg 6 test
    any reply are welcome
    thanks
  15. Replies
    0
    Views
    157

    wc pro 35 power on-off

    xerox wc pro 35 . after finished clean gear and installed back power off switch not response
    turn power on , power on switch working , , after finish priniting power off ,but not response
    what...
  16. xerox wc pro 35 main drive developer idler gear

    xerox wc pro 35 main drive developer idler gear ,is there a snap ring ?
    how to remove circlip to replace the developer idler gear
  17. Thread: output

    by ps22sp
    Replies
    7
    Views
    510

    Re: output

    lines are original design.
    the problem is words
    ---------------------------
    kissena boulvard
    flushing ny 11355
    ----------------------
    those characters
  18. Thread: output

    by ps22sp
    Replies
    7
    Views
    510

    output

    canon c3200 output every ten copies has one or two see the bottom
    drum need to be replace?magenta?
  19. Replies
    11
    Views
    748

    Re: color mis -registration c3220

    could it be the laser unit ?
  20. Replies
    11
    Views
    748

    Re: color mis -registration c3220

    go into level 2 but did not find reg-clr
    part fu7-0403 new part and fu3-0546 used on machine ,steel pin in fu7-0403 has more room than fu3-0546 but same result
    i lost the c clip .try other one...
  21. Replies
    11
    Views
    748

    Re: color mis -registration c3220

    part number fg6-9662-000 fm3-3775-000
    or fu3-0546 fu7-0403
  22. Replies
    11
    Views
    748

    Re: color mis -registration c3220

    gear must be replaced?
  23. Replies
    11
    Views
    748

    color mis -registration c3220

    pg6 pic
    pg10 has the same gap between each color
    transfer belt are cleaned , 42 T gear of the itb assembly and two 42 T gears of the itb Drive asembly
    or laser cam setting ?
    any comment and...
  24. Thread: c3220 problem

    by ps22sp
    Replies
    1
    Views
    306

    c3220 problem

    see photo
    this is two parts photo .there is a shadow on the bottom photo
    any comment are welcome
    thanks
  25. Replies
    2
    Views
    314

    Re: Wc pro 35 network software needed

    pipiantony@gmail.com
    thanks
Results 1 to 25 of 47
Page 1 of 2 1 2