Search:

Type: Posts; User: theengel

Page 1 of 20 1 2 3 4

Search: Search took 0.12 seconds.

  1. Replies
    1
    Views
    69

    Designjet 510 Paper Not Found

    This started by leaving big blank spots in the print. I suspected the encoder disc sensor, tested it, and it failed the test.

    I replaced the encoder disc sensor, and started printing again. ...
  2. Re: HP Designjet T2300 disjointed vertical lines

    Pretty sure your "mend" is the problem. Order a new carriage, and your problem will go away.
  3. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    Here's the thread where I was having something similar:

    http://www.copytechnet.com/forums/hp/105320-designjet-z3200-86-01-error.html?highlight=Z3200
  4. Re: Designjet T730 seems to get confused when printing from roll

    Replacing the motor did nothing. Not sure if the cust is going to go for the main PCA or not.
  5. Replies
    4
    Views
    213

    Re: HP CLJ M476 Jam in output bin

    no one?
  6. Re: HP Designjet T2300 disjointed vertical lines

    And what does "mend" mean... did you fix the broken parts or replace them?
  7. Re: HP Designjet T2300 disjointed vertical lines

    I can't picture what you mean here.
  8. Replies
    2
    Views
    325

    [Error Code] Re: hp m651 error 46.23.07

    Unplug the network cable and see if the printer will come to ready.
    Then print self-generated reports, and see if those print.
    Then change the IP address, so that you know nothing is trying to...
  9. Replies
    4
    Views
    213

    HP CLJ M476 Jam in output bin

    If I print 5 pages, the very last one gives me the code: "Jam in output bin. Open rear door and clear jam."

    If I print one page--it prints it and then displays that.

    When I look at the jam...
  10. Re: Imagerunner C5180i "cleaning blade" part #

    41198
  11. Thread: HP M 607

    by theengel
    Replies
    8
    Views
    298

    Re: HP M 607

    I had one that was doing the same thing...I think. It's been a few months. Anyway, I kept messing with the rollers and the sensor that sees the paper when the tray lifts. One of those plastic...
  12. [Error Code] Re: HPDJ Z3200ps photo printer with Error code 79:04 44" model

    I had a Z3200 with similar problems. Replaced the encoder strip, nothing. I can't remember what else I replaced, but I ended up replacing the entire carriage unit, and that fixed it. I don't think...
  13. Re: Imagerunner C5180i "cleaning blade" part #

    The only places that seem to have them are used or "refurbished." I ended up ordering just the blade from some Chinese company, because I can't find any new ones anywhere.
  14. Re: Imagerunner C5180i "cleaning blade" part #

    Also... it looks like the cleaning assembly number is FG6-8989... but I can't find it anywhere. Anyone know where I could buy one?
  15. Replies
    1
    Views
    135

    Close printhead cover on DJ 500 (SOLVED)

    So I walk up to a working 24" Designjet 500 to replace the trailing cables (the old ones were sagging and causing occasional carriage jams) and the encoder strip (it was so old that I was afraid to...
  16. Imagerunner C5180i "cleaning blade" part #

    I'm trying to find the part number for the transfer cleaning blade. PR has a "scraper" listed... is that what I'm looking for, or is there something else? Or do I have to order a whole cleaning...
  17. Replies
    1
    Views
    226

    Re: HP Laser Jet 600 M602 (Jam 13 B9 A2)

    The paper under the cartridge when it stops--does it have print on it? If so, I would suspect the fuser. You should be able to open the back door and watch it... see if the fuser stops turning...
  18. Replies
    4
    Views
    294

    Re: Hp designjet "Preparing print system "

    It's my understanding that the firmware, when updated, can help cut down on the amount of priming that happens when preparing ink system... done so in order to both save ink and to keep the service...
  19. Replies
    9
    Views
    506

    [Jamming] Re: HP Color LaserJet MFP M476dw

    I wonder how many machines got thrown away as "unfixable" when techs had those rollers and didn't realize it. I myself replaced a pick-up motor and a DC controller on a machine because of them.
  20. Replies
    9
    Views
    506

    [Jamming] Re: HP Color LaserJet MFP M476dw

    These use those little PacMan rollers (that's what I heard another tech calling them, anyway).

    There was a batch of bad ones going around. I think they might have actually been OEM, but I'm not...
  21. Replies
    9
    Views
    364

    Re: HL-8360 "Print Unable Z3"

    Thanks all.

    That's insane--to create a service error and not tell us what it is.

    I think I'm going to label this call "unfixable"
  22. Replies
    9
    Views
    364

    Re: HL-8360 "Print Unable Z3"

    The letters after the model number just indicate the printer's options. When I talk about a model, I generally don't include those letters, because it's the same model, no matter what the letters...
  23. Replies
    2
    Views
    273

    Re: designjet 500 encoder disk sensor cover

    I don't think I've ever split one before... sounds a little daunting.
  24. Replies
    9
    Views
    364

    Re: HL-8360 "Print Unable Z3"

    No one?

    Anyone have any idea where I can get a manual?
  25. Replies
    2
    Views
    273

    designjet 500 encoder disk sensor cover

    How the hell do you remove the little black cover above the disk sensor? I believe I've done it before, but I don't remember how I got it out. Do I just force it out or do I have to remove...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4