Search:

Type: Posts; User: prasad

Search: Search took 0.04 seconds.

  1. Thread: KIP 860 help!

    by prasad
    Replies
    11
    Views
    3,098

    Re: KIP 860 help!

    We had to adjust the tension on quite a few machines but just recently KIP released a new style sensor.
  2. Re: Bizhub Press C1060 Trail edge poor transfer on second side.

    Try this settings:

    Lead Edge Erase = 0.
    CPM = Down
    Thick BK Mode = On
    Fusing Air = Max 7
    Hard Paper = On
  3. Replies
    1
    Views
    509

    [Error Code] Re: Error codes 11506 and 13521 on Oce 2500

    The problem is resolved by loading the system software.
  4. Replies
    1
    Views
    509

    [Error Code] Error codes 11506 and 13521 on Oce 2500

    11506 unexpected logical connection loss with the print engine Mainnode Power & Control PBA, 22PBA01, Ethernet cable defective Error message 13521 - PEMOUTMO 13M89 speed error Start the SDS test of...
  5. Replies
    0
    Views
    2,182

    [Error Code] CFD00 on Bizhub 223

    CFD00 code sending email. Replaced MFPB, Memory, NVRAM.
  6. Replies
    16
    Views
    12,153

    [Error Code] Re: C-6752 Code on C220

    The problem is resolved by replacing the Interface Cable P/N - A0EDN14800.
  7. Re: C550 - black smudges about 1cm away from the lead edge onloy on A4

    Try running stablization and then run a copy. If the 1st copy has this mark and clears out the 2nd onwards. I had this problem and ended up being a HV. Poor cleaning after stablization due to...
  8. Replies
    16
    Views
    12,153

    [Error Code] Re: C-6752 Code on C220

    Data reset is done and Yes! I have an open ticket with KMBS.
  9. Replies
    16
    Views
    12,153

    [Error Code] Re: C-6752 Code on C220

    Interesting, hopefully something that relates to my copier. I also replaced the memory while troubleshooting.
  10. Replies
    16
    Views
    12,153

    [Error Code] Re: C-6752 Code on C220

    Yes.
  11. Replies
    16
    Views
    12,153

    [Error Code] C-6752 Code on C220

    Replaced MFPB, NVRAM, PRCB, CCDDB, DCPS, Flash Firmware, code out on bootup.
  12. Replies
    6
    Views
    1,630

    Carry out your transfer belt Mod. Also reinforce...

    Carry out your transfer belt Mod. Also reinforce the bracket.
Results 1 to 12 of 12