Search:

Type: Posts; User: Oze

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. Replies
    1
    Views
    55

    [Misc] Re: noisy fuser in MP C2011,MP C2003sp

    Fusing pressure release/exit motor motor.
    AX060435 is the part number.
    Maybe check the state of the fuser drive gear in the picture as well.
  2. Replies
    38
    Views
    1,995

    Re: Broken Fuser gears 2075- MP 8000

    My understanding was that there gear was physically wider and sits too far over the hot roller.
    Mind you....we have nothing older than a 6002 left in our region.
  3. Replies
    3
    Views
    114

    Re: Ricoh MP501 Opinion

    They have high yields because I believe these are a rebadged Kyocera.
  4. Replies
    11
    Views
    228

    Re: Ricoh MP4500 Jamming in duplex unit every copy

    "Trying this and that" is called troubleshooting around these parts.
    Maybe call a technician to DO that troubleshooting for you so you can get back to your skinny mocha ?
  5. Replies
    2
    Views
    294

    Re: SPC840/842 maintenance kits

    We just had an 840 black kit,colour kit and fuser delivered today to try and modify.
    If we figure it out we'll be making a step by step to give to our techs in the field and i'll pass it along.
    ITB...
  6. Re: [MP 402spf] Printer requesting Bypasstray paper

    Try setting the printer paper tray default to "Driver command" rather than "Machine Setting".
    That will rule out an issue with the job itself and so long as the customer chooses the correct paper...
  7. Replies
    9
    Views
    188

    Re: counter without @remote

    There's always FMaudit.
    It can collect meters and report toner levels(and flag toner out) on ALL machines on the network.
    Needs to either be installed on the customer server or any pc that is...
  8. Replies
    8
    Views
    373

    Re: smart operation panel V2

    You can also set it up via the WIM on the '04 range of machines.
  9. Replies
    38
    Views
    1,995

    Re: Broken Fuser gears 2075- MP 8000

    It kinda DOES matter considering the new style fuser gear you can't use for those older fusers.
    They were redesigned for the MP6002 and upwards.
    You asked and you have your answer.
    YES they...
  10. Replies
    9
    Views
    377

    Re: Ricoh c820dn Paper Creases when Duplexing

    Those guides I mentioned also have a small tongue at the top to stop the transfer roller assy from going behind the guide when the duplex door is closed.
    The guide would look complete to an end user...
  11. Replies
    16
    Views
    450

    [Misc] Re: Ricoh MP 3045 toner light

    When these units come due for a PM we generally just replace the entire PCDU which come pre loaded with dev.
    The only time I've struck something like this was when I replaced the PCDU and forgot to...
  12. Replies
    9
    Views
    377

    Re: Ricoh c820dn Paper Creases when Duplexing

    The common cause for the transfer case catching when you open the door is the two guides on the machine side that guide the transfer unit home have broken.
    It happen about 6 out of ten times from...
  13. Replies
    30
    Views
    874

    Re: ricoh mp3352 need firmware

    open the WIM....go to "System">General Settings and make English the first entry.
    Save,exit and you're welcome.:cool:
  14. Replies
    8
    Views
    1,219

    Re: Ta 356ci Intermittent Light copies/prints

    Further update:
    Apparently the customer is particularly lazy and couldn't be bothered logging a call to say that the fault has continued since fitting parts 2 months ago !!!
    Picking the machine up...
  15. Replies
    7
    Views
    1,515

    [Misc] Re: New TASKalfa 13600 Series aka RICOH

    As a Ricoh tech and now a Kyocera tech I say RUN...RUN NOW...!!!!! :p
    We now longer sell the Ricoh models in our region due to high maintenance costs and time taken for pm's etc.
  16. Replies
    7
    Views
    468

    Re: MP6055, jam won't clear

    Check the operation of the Transfer door as well.
    Our MPC4503 in Service Reception had broken part of the housing for the white door latches.
    It would close enough to not affect CQ but when you...
  17. Replies
    7
    Views
    468

    Re: MP6055, jam won't clear

    Have you tried a power cycle with ALL the doors open?
    Close them starting with the side doors first and the front cover last.
  18. Replies
    20
    Views
    994

    Re: Ricoh MP 2553 PRoblem

    Time to call a tech to service your machine.:cool:
  19. Thread: SPC840dn PCDU mods

    by Oze
    Replies
    5
    Views
    326

    Re: SPC840dn PCDU mods

    Take some pics for the larger forum community ? ;)
    We've ordered a Black pcdu and colour kit,an ITB assy and a fuser...going all out :p
  20. Replies
    12
    Views
    679

    Re: @remote issue on MPC3004

    When we've had @Remote issues in the past we used to run SP5-870-3 and SP5-870-1 to re-write KeyInfo and that usually resolved the issue.
    And what failure error code does it give you?
    Have you...
  21. Thread: SPC840dn PCDU mods

    by Oze
    Replies
    5
    Views
    326

    SPC840dn PCDU mods

    Hey guys,
    We have a bit of an issue where we have a crap load of D2442204 (or D239) PCDU on back order for the MPC2004/2504 machines.
    The Service manager at Ricoh has suggested that we use the...
  22. Replies
    5
    Views
    395

    Re: MPC4502 scan to mail default file name

    And the red cards continue :mad:
  23. Replies
    23
    Views
    1,448

    Re: MPC3003 print issues

    Stephen means to give the machine ANY static address you like and then change you laptop nic properties to be within range of the Ricoh to access the WIM.
    Also...did you check that IEEE 802.1x for...
  24. Re: Looking for feedback on hooking up a mpc401 where there is no access to router..

    Buy a cheap wireless range extender and build into the cost of the machine.
    Plug ethernet cable into extender.
    Push the WPS button on the range extender and then the WPS button on the router.
    Job...
  25. Replies
    23
    Views
    1,448

    Re: MPC3003 print issues

    +1 FOR CHECKING THIS.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4