Search:

Type: Posts; User: copyguy69

Page 1 of 2 1 2

Search: Search took 0.06 seconds.

  1. Replies
    2
    Views
    258

    Konica bizhub C35 Toner Issue

    The black image unit needed to be replaced. It is in good shape so I just replaced the chip. Now machine is telling me that the black toner is missing. The image unit message is gone. Tried...
  2. Replies
    6
    Views
    1,743

    Re: Toshiba e 256 Registration

    Thank I guess. Just thought if you knew it off the top of your head you could share. I have the manual and fortunately can read. Again thanks - maybe

    copyguy69
  3. Replies
    6
    Views
    1,743

    Re: Toshiba e 256 Registration

    Thanks blackcat for the response. Looking for the top tray. Could you point me toward the 08 code?

    copyguy69
  4. Replies
    6
    Views
    1,743

    Toshiba e 256 Registration

    Does anyone know the service code to adjust the registration off the glass not the ADF? Thanks in advance copyguy69
  5. Replies
    5
    Views
    1,583

    Re: e Studio 306 White Void

    Thanks for the replies. It was debris in the developer unit. Every time I rotated the roller is had no signs of anything bad but it was.

    copyguy69
  6. Replies
    5
    Views
    1,583

    e Studio 306 White Void

    I have a white void that is produced by the developer unit. Swapped it out with another and problem is gone. The blade gap is correct and there is new developer in the unit. There is no void of...
  7. Replies
    0
    Views
    1,722

    Konica pagepro 4650 clip

    I am looking for the part number for the silver contact clips that make contact with the toner unit. they are located inside the machine on the right side. Customer broke one of them off. Thanks...
  8. Replies
    4
    Views
    40,256

    Copier with rotate sort

    We have a customer who wants a machine that can rotate sort 8.5X11 copies. I sold them a Toshiba 2007 that they truly hate. Anyone have a brand that can do that feature and is reliable? Thanks in...
  9. Replies
    0
    Views
    1,938

    MFX-3530 Toner low

    The customer replaced the toner with a new one and when prompted by the screen if they wanted to use the new toner they said "No." How stupid is that. Now the new full toner says toner low and the...
  10. Replies
    3
    Views
    404

    Re: KD-1026 Parts Breakdown

    The part number for the motor assy. is 6LE68351000.

    copyguy69
  11. Replies
    3
    Views
    404

    KD-1026 Parts Breakdown

    I have a LCT KD-1026 with a broken lift gear. On the parts breakdown it looks like you have to order the entire motor assy. Is there a parts breakdown that just shows the gear? Don't really want...
  12. Replies
    2
    Views
    343

    Re: Toshiba E Studio 230

    I would try replacing the claws anyway and check what the temp. settings are set at in power saving mode. Good luck

    copyguy69
  13. Replies
    0
    Views
    1,861

    Samsung CLP-680 Noise

    I have this Samsung printer that seems to be making a loud noise generated from the belt unit. The color printing seems to be offset, but the black is fine. Has anyone had any issues with this...
  14. Thread: Toner chips

    by copyguy69
    Replies
    1
    Views
    305

    Toner chips

    Does anyone have a reliable source for toner reset chips. I have a bunch of Toshiba 256 toners that are nearly full, but say toner not recognized. Thanks in advance

    copyguy69
  15. Replies
    4
    Views
    442

    Re: Toshiba E-256 E220 Error

    Thanks for the replies guys. I did all suggested before I posted this thread including firmware etc. Was looking to try the transport clutch and then went back to basics as suggested cleaning the...
  16. Replies
    4
    Views
    442

    Toshiba E-256 E220 Error

    Just picked this up off lease. Everything works fine but the 2nd tray. Paper feeds up to the registration switch and stops. The first tray and the LCT work perfectly fine. The paper in the...
  17. Replies
    9
    Views
    1,460

    Toshiba e-2330c Green bands

    I have a machine that is producing light green bands on the bottom of an 8 1/2 x 11 sheet of paper. I have replaced all the drums and blades ( they were worn anyway) and the transfer belt and...
  18. Replies
    7
    Views
    502

    ES207L Upper Roller

    Does the same upper roller fit in 206l, and 207l? Different part numbers but I think it's the same. Thanks in advance.

    copyguy69
  19. Re: ES456 poor copy quality, bands and light streaks front to back of the machine on

    Maybe try swapping out the drum units from another machine with youy original developer unit. The problem could be in the drum unit and not the developer. Also make sure when you changed the drum...
  20. Replies
    3
    Views
    853

    HP Color Laserjet M651 Error 13.B2.D2

    Replaced one of the toner motors and cleaned the printer. Now I am getting the error and no paper will feed from tray 2. Went over all connections twice and double checked everything I touched. ...
  21. Re: ES456 poor copy quality, bands and light streaks front to back of the machine on

    Check the wall joint in the developing unit part #6LH53440000 on page 28 of the parts manual. It is the square looking roller in front of the mag. roller. I had one where the little white bushings...
  22. Replies
    1
    Views
    310

    Toshiba e-256 Print and Scan

    Is anyone printing or scanning with this machine using Windows10? Would like to know if their are any issues to be made aware of. Thanks in advance

    copyguy69
  23. Replies
    0
    Views
    1,970

    Muratec MFX-2570 Fuser Gear

    Does anyone know where I can get part #DC43320060. It is a gear in the fusing unit. Muratec says it's discontinued. The machine also crosses to a Konica Bizhub 25. Any suggestions are welcome. ...
  24. Replies
    1
    Views
    225

    Toshiba e-256 Fax Board Needed

    I need a fax board for an e-256 part #GD-1250NX. If anyone has one let me know and your price. Thanks in advance

    copyguy69
  25. Replies
    9
    Views
    2,401

    Re: bizhub 20P laser counter reset

    Look under the service manual for the HL-5370 and you will see the 5380 listed. I don't know why it is not listed, but it is there. Good luck

    copyguy69
Results 1 to 25 of 34
Page 1 of 2 1 2