Search:

Type: Posts; User: copiertec

Page 1 of 11 1 2 3 4

Search: Search took 0.19 seconds.

  1. Re: LJ M506 stuck on supply memory error 10.00.01

    I ordered the chip reader ( RM2-5702-000 (TAG assembly)), but am still waiting on it, so have not had a chance to replace it. I don't know what is happening with our parts dept, lately...but all of...
  2. [Misc] Re: Kyocera 306ci What is the difference between a Firmware pack and Firmware turbo p

    Good question! I always prefer the non turbo version as it rewrites everything as opposed to the turbo version which only rewrites the items that need updating. I started to use the full version back...
  3. Replies
    8
    Views
    415

    Re: Kyocera TA-8001i scan to smb error 2101

    Honestly, I walked away from it and let the IT department handle it. I will contact them and see what their resolution was.
  4. Re: Kyocera/copystar developer question please.

    I see the black toner drops on the page, this is a similar issue that occurs on the M6526cdn series. There is not much you can do, because it will continue after a few months, regardless if you...
  5. Replies
    5
    Views
    356

    Re: Sharp 3110n opinion

    They are great machines as long as all updates have been applied, updated fuser pressure release gear, etc. If you need scanning though, these MFP's only support SMB1, so if you need to scan you need...
  6. Re: kyocera m6535cidn cassette 1 lift gear replacement

    I know that this is not the way to replace that gear....but, this is the way one tech that I know does it, he has done it successfully on the m6526cdn's and the m6535cidn's ... and it works, but...
  7. Re: LJ M506 stuck on supply memory error 10.00.01

    I did try swapping out toner cartridges, first, when I was there last week with no luck, also, checked to make sure sensor was attached and cleaned properly (the chip reader in the printer) had the...
  8. Replies
    8
    Views
    546

    Re: Sharp mx m450n

    Lmao... just what I needed on a Monday!
  9. Re: LJ M506 stuck on supply memory error 10.00.01

    Thank you for the responses, I am scheduled to go back out later on, today. I will post my results.
  10. LJ M506 stuck on supply memory error 10.00.01

    I'm not to familiar with this printer, it has a supply error that wont clear and the printer will not print. I have done the basics, unplug, restart, tried a new known working toner from another...
  11. Replies
    3
    Views
    391

    Re: Kyocera CS-300i replacement machine?

    Yes, the whole series have been good to us. We currently have a 4501i with over a million clicks and it still runs great.
  12. Replies
    3
    Views
    391

    Re: Kyocera CS-300i replacement machine?

    IF you want to stay with Copystar/Kyocera in that print per minute range look into the 3501i.
  13. Replies
    7
    Views
    337

    Re: New to CopyTechNet

    Welcome. Most of your newer boxes (3yrs or less) will have smb2 or 3. Sharp copiers have the Sharpdesk option for scanning which does away with smb altogether. However, you do need to purchase...
  14. Replies
    8
    Views
    415

    Re: Kyocera TA-8001i scan to smb error 2101

    Thank you, I will give this a try as well.
  15. Replies
    8
    Views
    415

    Re: Kyocera TA-8001i scan to smb error 2101

    Thank you, these are good questions; but, I do not have an answer for all of them, and will have to investigate more and come up with them. However, I do know the the PC had "home" version of Windows...
  16. Replies
    8
    Views
    415

    Re: Kyocera TA-8001i scan to smb error 2101

    Yes, I did try the IP as well.
  17. Replies
    8
    Views
    415

    Kyocera TA-8001i scan to smb error 2101

    I am having an issue connecting a PC (windows 10) to scan smb, The result is a 2101 error on a TA-8001i. First, let me start with, 1.) latest firmware is loaded on the MFP 2.) I made sure proper...
  18. Re: Sharp MX M503N fuser web question and 25-2 dev calibration question

    As far as the web, I would check the parts manual and see where those spacers are placed for the web. The reason it is saying "check drum" is because you need to reset the drum counter after...
  19. Replies
    9
    Views
    535

    Re: MX B402SC Duplex Jams are back!!

    Agreed with Zootech, because these machines are a clutch nightmare because there are so many packed into such a small area, so I would start there first, make sure all sensors are clean of paper...
  20. [Misc] Re: MX-2301N Firmware and random freezing issues

    You're freezing issue may be the HDD. Try reformatting it and see what happens after that. I would of recommended pulling out ROM chips and making sure they are clean, but you have already done that....
  21. What is the best way to indentify SMB capabilities/ versions on any MFP?

    Besides the fact that any given MFP will not scan to smbv1, possible manufacturer bulletins regarding SMB versions on their models, or, models that are older than dirt. Is there a quick and easy way...
  22. MX-M503N "The number of Job Log reached to the designated value" issue.

    I am getting " the number of job log reached to the designated value" message on a MX-M503N. This is a busy mfp with several pc's printing and scanning to it, as well as, receiving and sending...
  23. Re: customer gonna be doing a big printing,copying ans scanning job.

    ftp://kb:kb@ftp.lesolsoncompany.com/authentication/userauthenticationonmx-color.pdf It is hard to explain so go to this web site and it will show you how to set up authentication mode for each user....
  24. Replies
    3
    Views
    758

    Re: MX-C312 HDD replacement question

    Instead of guessing... I just ordered a 2.5 320 gig HDD. I'm thinking the only issue may arise is GB size, but not sure, because the 312 is basically a revamped 311.
  25. Replies
    2
    Views
    922

    Re: NX-4110 scanning Checks

    Agreed with Phil B. Copy only in mono and/or slightly reduced or enlarged.
Results 1 to 25 of 273
Page 1 of 11 1 2 3 4