Search:

Type: Posts; User: Doug James

Page 1 of 20 1 2 3 4

Search: Search took 0.39 seconds.

  1. [CQ] Docucolor 242 Missing Cyan when copy off glass, Prints from PC Fine...

    We moved this machine from one area of the building to another. Previously was working fine but when moved it started copy off glass missing cyan color (Test Chart). Then sometimes will put cyan all...
  2. [Misc] Re: Kyocera 306ci What is the difference between a Firmware pack and Firmware turbo p

    Thanks so much !! You guys are GREAT !!! Thanks again !!!
  3. [Misc] Kyocera 306ci What is the difference between a Firmware pack and Firmware turbo pack

    Trying to locate the correct firmware I need for this machine.... Figured using the higher version number and the latest date created. But what is the difference between a turbo pack and just...
  4. [Misc] Re: Copystar 3500i Job accounting management won't work with a Mac System

    Thanks so much for the comments !!!... Think he is going to work on this today....
  5. [Misc] Copystar 3500i Job accounting management won't work with a Mac System

    This customer want to count all copies with each lawyer they have in there office. The computer tech working on this says that he cannot get a mac system to ask for a passcode. Windows 10 works fine....
  6. [Misc] Taskalpha 3550ci Will only "scan" one page at a time

    Probably a simple answer but when scanning to PC. The scanner will only scan one page and not scan a set to a file. Thanks so much for any help !!
  7. [Error Code] Re: CS 4550ci C0620 Error Fax card and Dimm installed from another machine

    Tried different slot today, different DIMMS, Thinking at this point the controller board has a problem. (That's probably why the fax interface wasn't on the machine but the buttons etc were...)
  8. [Error Code] Re: CS 4550ci C0620 Error Fax card and Dimm installed from another machine

    After looking at the Install instructions closer , it looks like I was plugging the fax interface board in the wrong slot... Trying it today. Sure do appreciate your insight....
  9. [Error Code] CS 4550ci C0620 Error Fax card and Dimm installed from another machine

    I installed this Fax unit and DIMM from another 4550ci. I reinstalled the firmware. I did a U671 and did a recovery Fax DIMM. Every time it gives me C0620 Error. The machine that I installed the new...
  10. Replies
    4
    Views
    263

    Re: Okidata MB760B Fuser motor part #

    Sure do appreciate your help !!!
  11. [Dead] Ricoh (Savin) MP C5502 Service mode ? & False Black toner Message..

    I am trying to get into service mode. I have tried the(yellow key) "182806" Tried "806182" "tried 107" ("C") Nothing happens. The initial problem is the image unit is not getting toner. Assuming it...
  12. Replies
    4
    Views
    263

    Re: Okidata MB760B Fuser motor part #

    Thanks so much !!!
  13. Replies
    4
    Views
    263

    Okidata MB760B Fuser motor part #

    Having a problem with this Okidata MB760B C4E3 error. I replaced the fuser and the next step is the fuser motor. It's hard to tell what that is in the parts diagram. Any help would be very...
  14. [Misc] Re: Copystar (Kyocera) CS 3035 Say "processing" when in print mode

    I figured I was in trouble after I did it. The bad thing is I know better... lol Getting to know the manual very well now...
  15. [Misc] Copystar (Kyocera) CS 3035 Say "processing" when in print mode

    This copier is not being able to print to at all. Say "processing" and the light is staying on on the print button. I disconnected the LAN cable. with the machine off, turned it back on and the print...
  16. Formax 8902CC Paper Shredder Won't continue running

    I am a copier tech that is helping a disabled community with there paper shredder. A formax 8902 CC When you press start it goes in reverse. Then the belt stops, the reverse light comes on, then it...
  17. Replies
    12
    Views
    805

    [CQ] Re: FS 1135 Copies are slightly faded

    Thinking the same, Going to go through developers tomorrow. Just thought it was strange that all the machines were doing it....
  18. Replies
    12
    Views
    805

    [CQ] Re: FS 1135 Copies are slightly faded

    Yep, sure is
  19. Replies
    12
    Views
    805

    [CQ] FS 1135 Copies are slightly faded

    I bought 12 of these machines with under 10K on each. On everyone of them the copies aren't sharp and greyish. Not real bad but I am not sure I want to sell them that way. Been trying to make the...
  20. [CQ] Re: FS 1135 Won't let,me set to Auto Density

    Thanks so much !!! Worked great
  21. [CQ] FS 1135 Won't let,me set to Auto Density

    The copies are coming out light (The machine sat for awhile) I went into system menu>common settings>function default>density... The setting is set to manual. When I curser up and hit ok the machine...
  22. [CQ] Xerox D110 Leaving black on paper edge when stacked

    I changed the developer and drum and this machine still does it. I don't mess with high volume usually but made an exception with this customer. See pic... Thanks for any help !!
  23. [Misc] Re: CX 410DE can I swap controller board from another machine ?

    I put the controller board in and turned on holding 3 & 6 the copier beeps once (No green light no lit touchscreen no fans) and that's it... The green LEDs are lit up on the board though. I put the...
  24. [Misc] CX 410DE can I swap controller board from another machine ?

    I have a CX410de that the USB port is broken. I saw one on ebay for $88. (OK so I'm an idiot) It's for a friend of mine... Looking through here I am seeing that it may not work since the boards are...
  25. [Misc] Re: Will Sharp MX M754 Fuser work in a Sharp MX M654 (Same machine)

    Your Great !!! Thanks so much !!!
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4