Search:

Type: Posts; User: tmw

Page 1 of 2 1 2

Search: Search took 0.07 seconds.

  1. Replies
    3
    Views
    188

    Re: designjet z3200 22:3.10 error shown first

    Thank you for your answers. For the record, inks are oem, and the diagnostic test only did about six items, then went into code. I couldn't get any meters from it.
  2. Replies
    3
    Views
    188

    designjet z3200 22:3.10 error shown first

    Still trying to make sense out of these plotters. It seems more often then not they don't like being fixed.
    This time it got a 22:3.10 error, ran diagnostics,got same error. Book says that means...
  3. workcentre 4250 trouble clearing jobs stopping print

    Don't normally work on xerox. Jobs in the printer queue seem to be holding it up. Made sure any jobs were cleared out of all the computer queues. One job said it had 600,000+ bits & was the hardest...
  4. Replies
    3
    Views
    331

    Re: es 450 problem loading hdd firmware

    Yes, that file is included.
  5. Replies
    3
    Views
    331

    es 450 problem loading hdd firmware

    Hello.Before, I have successfully replaced and loaded firmware on to new hard drives, but now it wants to confound me. I'm using a 2 gb flash usb, is formatted FAT, and has 450 firmware on it. I've...
  6. Replies
    3
    Views
    499

    Re: Help on colorqube 8570 91,720 error

    I would like to thank those who replied with their suggestions, although this machine is still giving me problems. I ordered and installed the sleeve kit as suggested. I was hopeful as a piece was...
  7. Replies
    0
    Views
    1,792

    xerox colorqube 8570 91,720 error

    I have a fuller description in the xerox copier section of what I did or didn't do to increase chances of being seen. Basically it gets a head tilt error about 11% into warm up & will reboot at the...
  8. Replies
    3
    Views
    499

    Help on colorqube 8570 91,720 error

    Was trained some time ago on tektronix 350,360 and worked on up to phaser 860. I have not seen these for a long time until I was sent to look at a colorqube 8570.
    It would start to initialize & warm...
  9. Replies
    5
    Views
    404

    Re: C754e Color lines when copying color docs

    I don't work on these mainly, but I've seen different models do similar things. There might be tiny specs of dust or dirt in the reading path, or the cis or whatever is picking up the image is going...
  10. Replies
    7
    Views
    431

    Re: bizhub c203 e4553 need advice from experts

    It's true, it is a used laser. I don't have access to any others. I'll see if I can find the trouble reset. Maybe it will clear after sitting in the machine for a while. Would a laser problem cause...
  11. Replies
    7
    Views
    431

    bizhub c203 e4553 need advice from experts

    Not one of the brands we work on, but have to look at it anyway. Originally the problem started as an e4553, yellow laser malfunction. I replaced the laser, turned it back on, and it still had the...
  12. Replies
    6
    Views
    866

    Re: Office 365 "Servers Not Found"

    Don't know if this has anything to do with it, but we had a similar problem with a couple of ours recently. It turns out gmail went & changed/ updated the smtp address out of the blue. We corrected...
  13. Re: help please narrowing down 03130031-2f13 on ipf 765

    Thank you for replying. I will try the ink carts & see if the cutter is dull. It's the next available thing to try. I don't have any spare boards.
  14. help please narrowing down 03130031-2f13 on ipf 765

    I look at these occasionally, but they aren't the main type of machine I work on. I've been doing research here and elsewhere, there is mentioned a list of things it might be, but not really a way to...
  15. canon ipf 750 need advice in diagnosing problem

    I've been occasionally sent to look at ipfs, although they are not normally what I work on. I have a manual, but it only takes me so far.
    The original problem was 03130031-2f2a, feed roller...
  16. Re: Epson DFX-8500 need advice for unknown machine

    Thank you for your suggestions,Phil. Now I just need to determine which contact points to start testing on.
  17. Epson DFX-8500 need advice for unknown machine

    It has become common to be sent to a machine that I haven't seen or heard of. This is one of them. Originally the customer had three machines that the tractors became misaligned. I got a manual and...
  18. imagerunner 3030 light print on one edge of print

    Canons aren't what I normally work on, I wonder what advice or information a knowledgeable person would have. I was called on this machine they said had noise and streaks. I found the noise, but it...
  19. Replies
    5
    Views
    691

    Re: p4015 mysterious chronic jamming

    Thank you to all who took time to reply. I need to modify my post somewhat. I forgot to mention that I did replace the manual tray assy. I can't remember now if I changed the d.c. controller or not,...
  20. Replies
    0
    Views
    236

    p4015 mysterious chronic jamming

    Started working on a machine that will print from 1 to 10 pages then stop. Always stops just into registration or up to the top of page sensor. Have already tried new rollers,paper drive assy., tray...
  21. Replies
    5
    Views
    691

    p4015 mysterious chronic jamming

    Started working on a machine that will print from 1 to 10 pages then stop. Always stops just into registration or up to the top of page sensor. Have already tried new rollers,paper drive assy., tray...
  22. Re: hp officejet pro x576 "problem with printer or ink system"etc. message

    Thank you Lance for your reference material. Although these printers are out of range of those serial numbers, and there are no error codes shown.
  23. hp officejet pro x576 "problem with printer or ink system"etc. message

    It's rare I have to look at these things,so I only know so much. I was sent to an office with two identical machines. I gather that they have frequent power problems,and when they do, they get a...
  24. Replies
    0
    Views
    259

    MJ-1030 won't consistently align staple jobs

    I have a mj-1030 finisher not pulling the papers together to get them all stapled.I only have a parts,no service manual.I rarely have to deal with these,and the spaces are so small I can barely get...
  25. Replies
    7
    Views
    724

    ricoh aficio mp 4002 grey background on edges

    I don't normally service ricohs.I got a call for grey on the edges of the page and it appeared to be from the charge roller.First,I relaced it with a third party roller,then an oem one.Both of them...
Results 1 to 25 of 30
Page 1 of 2 1 2