Search:

Type: Posts; User: Synthohol

Page 1 of 20 1 2 3 4

Search: Search took 0.14 seconds.

  1. Replies
    2
    Views
    85

    Re: C-4101 bizhub C220

    Did you change the PH relay board as outlined in the manual?
    A0EDH00200
  2. Replies
    7
    Views
    157

    Re: Logical format is stuck at 0%

    Unset the hdd and reboot.
    May ask to format the ssd that's ok to do.
    No address book or scanning but at least you can copy and print.
    Then reboot and set back to installed and reboot.
    Btw it...
  3. Replies
    7
    Views
    157

    Re: Logical format is stuck at 0%

    If it was a new drive there was no need for a physical format only logical.
    Make sure the HDD is still set to installed.
    Since you don't have anything on the hdd you can always try a total system...
  4. Replies
    10
    Views
    236

    Re: Bizhub c235 A02E0Y0-0100-G10-R6 Firmware

    look at the doc that came with fw.
    everything listed is r5 only boot is r6.
    see page 2.
  5. [Misc] Re: Bizhub C754 Keep Showing Cleaning In Progress

    check all the belts on the exit assy, ive had them slip off or even the clock disk falls off.
  6. Replies
    10
    Views
    236

    Re: Bizhub c235 A02E0Y0-0100-G10-R6 Firmware

    hey, i relabeled nothing.
    that was right from konica.
    i downloaded it again and when i put it on the server it said its the same file but you are more than welcome to d/l again the fresh copy?
    ...
  7. Replies
    10
    Views
    236

    Re: Bizhub c235 A02E0Y0-0100-G10-R6 Firmware

    A02e0y0 is the C253.
    Firmware is correct I linked you to.
  8. Replies
    10
    Views
    236

    Re: Bizhub c235 A02E0Y0-0100-G10-R6 Firmware

    link sent!
  9. Replies
    11
    Views
    276

    Re: Account track on Mac

    first off, preview is the worst to print from. its crap.
    just had to get that out of the way...
    go into the cups and find the option for it and enter the relevant info. they may even have a popup...
  10. Replies
    10
    Views
    236

    Re: Bizhub c235 A02E0Y0-0100-G10-R6 Firmware

    i have it on my server.
    become a contributor and ill send you the link.
  11. [Misc] Re: Bizhub C754 Keep Showing Cleaning In Progress

    did you slide the shield over and clean the two windows over the sensors under the belt?
  12. Re: We had a problem about update firmware bh215

    yes, why?
  13. Replies
    2
    Views
    141

    Re: KM C654 & IC-414 - communication

    be patient, sometimes it takes a while after reflashing system software.
  14. Replies
    1
    Views
    115

    Re: KM C-652 RIP Issue

    You should be able to print a config page from the control panel just hit utility controller details menu print pages configuration page if you don't have control over details than your fiery is not...
  15. Replies
    3
    Views
    141

    Re: KM 654e, Fiery IC414 - Disk problem

    link sent!
  16. Replies
    13
    Views
    4,536

    Re: Bizhub 500 Toner Bottle Not Spinning

    COMPLETELY vacuum out the subhopper, blow out the sensors and pray.
    then throw it off a cliff.
    replace the hopper assy if they still make the modified one or find a cliff.
    id take a di-3010 over...
  17. Replies
    16
    Views
    776

    Re: KM C258 offsetting issue

    Not for nothing, I have seen issues like this when the file has layers and is not flattened properly and the underlying image still shows up.
    Does it do it with every job or just this one?
    Print...
  18. Replies
    3
    Views
    141

    Re: KM 654e, Fiery IC414 - Disk problem

    I have it in english
    Become a contributor here and I'll send you a link.
  19. [Misc] Re: Bizhub C754e thinks it's a Generic 60C-6E

    What do you mean it reverts back to 20?

    Use the arrow key to make it 02 and hit fix.

    Solution

    CAUSE: Incorrect settings.
  20. [CQ] Re: BHC452 "The color is off, I wanted a different shade of purple", she said.

    thats eazy peazy.
    local port
    standard tcp-ip
    load driver manually not from a setup on disk.
    change port type to LPR instead of RAW.
    Queue name Print
    done.
  21. [CQ] Re: BHC452 "The color is off, I wanted a different shade of purple", she said.

    IC-412 fiery is less than 500.00 used if that helps?
    IC-412 konica - Google Search
  22. Replies
    27
    Views
    575

    [Error Code] Re: Kmbs 552 pagescope ssl error!

    honestly it looks like a password issue. i have hundreds of machines that dont have SSL and i can still login.
    i would try a system data reset again, turn ther HDD back on and run the latest...
  23. Replies
    17
    Views
    815

    Re: Scan to USB memory using Sandisk FD

    the solution is to use a drive <4g that is proven to work.
    even scan to USB has drives that dont play well.
    Reference
    Following are the USB drives tested and approved for the scan to USB...
  24. Replies
    27
    Views
    575

    [Error Code] Re: Kmbs 552 pagescope ssl error!

    please post a screenshot of the error page.
  25. Replies
    27
    Views
    575

    [Error Code] Re: Kmbs 552 pagescope ssl error!

    then pagescope normally should work.
    try http:// instead of https://
    even without SSL the non SSL page should open.
    is there something to click on the page like advanced and accept connection...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4