Search:

Type: Posts; User: doinbox

Search: Search took 0.07 seconds.

  1. Re: Kyocera Taskalfa 3252ci background and error codes

    If thatís the case Kyocera need to get there finger out and update the firmware to resolve this issue because you shouldnít really have to power off before changing a drum.
  2. Replies
    5
    Views
    499

    Re: Biz hub c 220 Copy issue

    Your issue is more than likely the scanner bed has dropped because there is no support at the front left corner. Get your hands underneath the scanner bed and lift it up. It might take a few...
  3. Replies
    6
    Views
    1,557

    [Jamming] Re: bhC364 93-10 jam code

    Thereís a spring at the front of the machine just under control panel once you remove covers that is attached to the exit gate. I trimmed a bit off the spring to increase pressure to fix this issue.
  4. Re: Kyocera Taskalfa 3252ci background and error codes

    Might sound stupid but this isnít one of those cases where the customer has put the waste toner bottle in the black toner slot is it?
  5. Replies
    4
    Views
    663

    Re: Biz 223 quality issue

    You can get similar issues when replacing a drum without resetting the chip. Sometimes background data reset will resolve.
  6. Replies
    6
    Views
    1,078

    Re: AirPrint on Bizhub C224 none E version

    No problem. Just baffled me how it mentioned both ranges on the bulletin. Thanks anyway
  7. Replies
    6
    Views
    1,078

    Re: AirPrint on Bizhub C224 none E version

    AirPrint on a 224e works through a device connected to the same network nothing to do with Bluetooth or wifi adapter.
  8. Replies
    6
    Views
    1,078

    AirPrint on Bizhub C224 none E version

    Is it possible to have AirPrint enabled on a C224 none E version. According to the bullitin it states it is available on C224 and also the E versions. If it is possible could someone explain what...
  9. Replies
    9
    Views
    1,406

    Re: Taskalfa 8001i J1301 Jams

    Just thought I'd update the post and let you know what it was. I took the Feed Drive assembly off and all the clutches where rusty as hell. So Replacing it. Thanks
  10. Replies
    9
    Views
    1,406

    Taskalfa 8001i J1301 Jams

    Hi there. We have a customer with an 8001i that has just started to throw a J1301 code when trying to use cassette 1. The paper picks up but doesn't exit the feed unit, they do a lot of labels so we...
  11. Replies
    10
    Views
    4,211

    Re: bizhub 223 copies bad after drum change

    Is this the first time you have replaced the drum on that machine or have you replaced it once before? I had a similar problem on a 283 when I replaced the drum and cleaning blade it started printing...
  12. Re: Printing command takes too long Konica Minolta Bizhub Pro C5501

    The switch is probably not fast enough to handle all 3 devices.
  13. Replies
    21
    Views
    1,851

    [Misc] Re: bizhub c-220 scan to Email

    You can't scan to email without a Hard Drive. Where would the copier store the PDF before it sent?
  14. Replies
    10
    Views
    1,603

    [Jamming] Re: C6500 jamming from Tray 2 and 3 ONLY

    Ignore my last post. Have you replaced the sensor marked 1 on this picture. It seems to me that the sensor isn't working so the vertical rollers do not attempt to turn. Can you do a sensor check on...
  15. Replies
    10
    Views
    1,603

    [Jamming] Re: C6500 jamming from Tray 2 and 3 ONLY

    Have you marked the rollers to see if they turn?
    Is the door shutting properly? check the claws on the door, make sure there not broke.
  16. Replies
    20
    Views
    21,004

    Windows 8.1 Update breaks SMB protocol.

    Hello everyone. Not sure if this has been posted but I couldn't find it. The latest update to Windows 8, (8.1) has a bug which stops the SMB protocol from working. There will be an update sometime in...
  17. Replies
    13
    Views
    2,438

    Re: C451 black drum problem

    It may be that the K hopper seal needs replacing. I have replaced many on C451/550/650 with high click.
Results 1 to 17 of 18