Search:

Type: Posts; User: tonerjockey

Page 1 of 10 1 2 3 4

Search: Search took 0.12 seconds.

  1. Re: Sharp MX M503N fuser web question and 25-2 dev calibration question

    thank you for that.
    i went back a few days ago and completed the resets on PM, drum and web. the developer had reset with the calibration.

    the 64-05 ? 12A exposure adjustment calibration had a...
  2. Re: Sharp MX M503N fuser web question and 25-2 dev calibration question

    i am trying to attach the picture of the old hubs. i dragged it to the add pane, but its in another window??
    i posting hoping that it will appear on the post.
  3. Re: Sharp MX M503N fuser web question and 25-2 dev calibration question

    thanks for the updates guys.

    i guess since i only have one MX M 503 in the field, i will leave it as is.

    i really appreciate the info about them not being needed any longer, and that it works...
  4. Re: Sharp MX M503N fuser web question and 25-2 dev calibration question

    interestingly enough, the two ? collars or friction hubs, are not shown in the parts manual.

    so, apparently, they are not used any longer?
    possibly, there was a mod kit to convert an old style...
  5. Re: Sharp MX M503N fuser web question and 25-2 dev calibration question

    i didn't do any sims except for the 25-2.

    the one new web shaft on the drive end, did have one notch, that fits into the drive gear.
    its the other side that had these collars, with two notches...
  6. Re: Brother MFC 9560 CDW adf wont sense document and wont work.

    Hi blackcat4866.
    So, all those sensors either have slightly different specs, or a different p/j?

    What we go thru.your diligence is very commendable.
    That's what makes us great copier techs.
    I...
  7. Re: Sharp MX M503N fuser web question and 25-2 dev calibration question

    Thank you copiertec.
    I'll try your suggestions. I really appreciate your help.
    Have a nice weekend.
  8. Brother MFC L 5850 DW etc. scaned documents thru ADF, are often scewed or crooked?

    Hello guys, i have sold several of these and similar smaller DCP L2550 DW and MFC L8900 CDW models.

    the customers all complain that when they scan with the adf, the PDF shows up crooked.

    i...
  9. Sharp MX M503N fuser web question and 25-2 dev calibration question

    Hi guys/ girls.
    i just did the fuser maintenance kit on this box, as well as the charger kit, drum and developer.

    i estimated 1.5 hours, took about 3.5 after running out 3 times to feed the...
  10. Re: Brother MFC 9560 CDW adf wont sense document and wont work.

    Hi guys, hope your enjoying a nice weekend.

    i wanted to follow up and thank you all for the assistance.

    the sensor test 32, i think it is listed as, is actually 31. and it was that way on...
  11. Re: Brother MFC 9560 CDW adf wont sense document and wont work.

    ok, i got the service manual.

    ill attempt to isolate it that way. i really appreciate your help. i need to get on the ball here.

    have a great day guys, Jim
  12. Re: Brother MFC 9560 CDW adf wont sense document and wont work.

    Hi TSBservice. thank you very much for the info also.
    i don't think i have that exact service manual, but Brother sim and service mode codes prior to the LCD icon display shared a lot of service...
  13. Re: Brother MFC 9560 CDW adf wont sense document and wont work.

    thanks Phil.
    i'm loosing my brain. i will look for the manual sensor test page. thankfully the mechanical aptitude is still working for me. guess i was out of it after a weekend carrying on like a...
  14. Brother MFC 9560 CDW adf wont sense document and wont work.

    Hi guys, i set the document in the adf and it copies from glass. nothing indicates that a document was sensed.
    i opened it up to inspect the paper sensors and actuators. all are mechanically working...
  15. Re: HP laser jet 500 color MFP M575 intermittent no feed from tray 2

    So, I was thinking. Since the tray 1 works fine, that rules out the registration sensor.

    The tray 2 paper pickup assembly only shows one sensor, so I speculate that's a paper in the tray sensor,...
  16. Replies
    5
    Views
    513

    Re: Canon IR Adv c5045i and c5051i

    Are"both"machines doing the same thing? Had you changed some parts, or did some maintenance on them that was the same? That could indicate areas to look.

    Also, is your samples posted here copies? ...
  17. Re: HP laser jet 500 color MFP M575 intermittent no feed from tray 2

    Thank you Lance15 for the additional info.

    i didn't see anything wrong with the tray, but doesn't mean it is ok. i think there was a lifting mechanism.
    when i watched it feed, it would work...
  18. Re: HP laser jet 500 color MFP M575 intermittent no feed from tray 2

    Hi guys, I did the unthinkable, and purchased the paper feed drive unit.

    And I was on my knees and sitting on the floor in the isle of the customers small office for over 2 hours.
    And same thing....
  19. Re: HP laser jet 500 color MFP M575 intermittent no feed from tray 2

    Hello, yes, I removed the one side of the sensor on the door side and cleaned it.
    I brushed and manually cleaned the other clear window side.
    was going to blow it out, but didn't.
    The paper is...
  20. HP laser jet 500 color MFP M575 intermittent no feed from tray 2

    Hi guys, this gives a jam code of 13.B2.D2. i removed the tray 2, front cover and watched this on a run of 20. it will feed fine, then shows the error and stops. it looks like the roller just doesn't...
  21. Re: Canon image runner adv. C5045 error E000075-0003 itb belt off center 2nd time

    That was it. the belt improvement kit included the 2nd inner transfer roller that was gouged from a bad bearing. note, the bearings are NOT included in the kit. My amazing Canon parts/ tech told me,...
  22. Re: Canon image runner adv. C5045 error E000075-0003 itb belt off center 2nd time

    I have not.I did hear about that mod kit, but totally forgot.
    If everything looks to be undamaged, would that be a reasonable next course of action?

    Thank you very much fur the expertise.
    I...
  23. Canon image runner adv. C5045 error E000075-0003 itb belt off center 2nd time

    I posted this yesterday but it dispersed.
    Tuesday customer called with the down machine, with the belt off center code.
    I manually rotated it the belt back to center, did the service mode...
  24. Re: Brother intelifax 4750e / 4100e document CIS needed

    Hello, yes they are readily available.but they are expensive.

    I need one for a loaner I robbed one out of for a customer and another for spare parts in van.
    I used to find them either used or new...
  25. Brother intelifax 4750e / 4100e document CIS needed

    Hi guys. i am looking for a couple more document scanners for these. (CIS) assemblies.

    the Brother part number is LE7949001.

    please let me know if you happen to have any for sale please.
    ...
Results 1 to 25 of 247
Page 1 of 10 1 2 3 4