Search:

Type: Posts; User: TonerMunkeh

Page 1 of 20 1 2 3 4

Search: Search took 0.16 seconds.

  1. Replies
    1
    Views
    161

    Re: Doubt buy ricoh c5200

    The registration is only as good as the media the customer is using. If you want proper online registration adjustment the Pro C7200 does it on it's own every copy.
  2. Re: Firmware to allow remote into Smart panel

    EDC files are apps and need installing through panel service mode. Get into it using the same mode as SP modes but with ##C at the end instead of just C. Then to go apps, install and select the...
  3. [Misc] Re: Latest models with older Equitrac installation

    Yes indeedy.
  4. [Misc] Re: Latest models with older Equitrac installation

    You can put PCC4 on the newer kit and use the Mifair card readers too.
  5. Re: cleaning blade failures in the corona series (mp -54/5)

    That's bizarre! Is the toner you are using original too?
  6. Re: cleaning blade failures in the corona series (mp -54/5)

    Are you using original bits? I have noticed the Corona PCDU doesn't last more than about 400-500k before it dies completely and requires replacement.
  7. Replies
    5
    Views
    297

    [Error Code] Re: SC220 RICOH MP5001

    Next step I'd try would be door switches, if one of them is a bit fritzy it will affect the laser.
  8. Replies
    14
    Views
    632

    Re: New Ricoh have no USB-B socket

    See the little punch-out under the A-types? That's where it is.
  9. Thread: MP C4503

    by TonerMunkeh
    Replies
    8
    Views
    430

    Re: MP C4503

    Which frimwar have you updated?
  10. Replies
    8
    Views
    491

    [CQ] Re: Ricoh mpc3002

    That cleaning blade looks as if it's well past due for changing, just replace it.
  11. Replies
    8
    Views
    333

    [Jamming] Re: Ricoh MPC5501

    Replace D029 4580.
  12. Replies
    7
    Views
    345

    Re: wide format color mpcw2201 mochac2

    If the print head is blocking that often I'd replace the maintenance unit. If that doesn't sort it, replace the black heads. Are you using Ricoh ink?
  13. Replies
    3
    Views
    303

    Re: Ricoh MP 301 SP mode

    Fusing temp is in 1, not 9. Compatible toner is the biggest cause of caked thermistors.
  14. Replies
    2
    Views
    228

    Re: colour registration problem mp c8002

    SC285-00 D MUSIC error


    The results of MUSIC pattern reading failed 4 times while the machine is turned ON.

    Details:
    When MUSIC fails 4 times while the machine is turned ON. (The count is...
  15. Replies
    18
    Views
    5,042

    Re: Ricoh Aficio MP301 with SC672

    These things don't have that SP mode :(
  16. Replies
    6
    Views
    346

    Re: DF3010 (mp4000, mpc3500)

    One of the gears that drives the reverse roller can crack, seen that before. Also the one way bearing under the feed belt can get a little sticky.
  17. Replies
    18
    Views
    5,042

    Re: Ricoh Aficio MP301 with SC672

    Imprestik have you had any do this recently?
  18. Replies
    2
    Views
    222

    Re: MP C8002 Banding

    Usually it's the dev unit itself. You probably don't have to fit a whole new PCDU, just the dev unit on it's own.
  19. Re: Ricoh MP301SPF: Using duplex as default setting in scan

    That one I'm not too sure on. I think there's an setting in scanner SP that's called something like "user info release". If that's disabled it doesn't reset the scan destination, but I don't know if...
  20. Re: Ricoh MP301SPF: Using duplex as default setting in scan

    Yes, use the program features key. It's a diamond with an arrow pointing out of it. Make your settings, then press that key, then program as defaults.
  21. Replies
    16
    Views
    732

    [Misc] Re: Ricoh MP 3045 toner light

    If you cheat the front door and look into the toner hopper, can you see the bottle turning when it's trying to add toner? Which developer did you use?
  22. Replies
    7
    Views
    335

    [Misc] Re: Ricoh MP C3002 paper problem

    Check the discharge teeth on the PTR, some of them may be stuck up.
  23. Replies
    21
    Views
    1,101

    Re: SC 552 AFICIO MP 5500

    Have any of the thermostats on top of the fuser jumped?
  24. Replies
    10
    Views
    689

    Re: SC544-00 Error at Ricoh MP2553 Copier

    A complete fuser is a bit of a stretch, hot roller, pressure rollers and thermistors definitely, but a whole new fuser?
  25. Replies
    2
    Views
    273

    [Electrical] Re: MP9000 Printer feature disabled

    Could also be someone's enabled the application invalidation for the printer function as if it has a Fiery. 997 is an application selection error.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4