Search:

Type: Posts; User: Gulbadin

Search: Search took 0.05 seconds.

  1. bizhub 601 user box does not show save documents option

    when i go into the user box only use document and save document option are present. HDD is installed into the copier. but when i check it in service mode the HDD shows unset. please guide me how to...
  2. Replies
    3
    Views
    191

    Re: minolta bizhub 600 firmaware

    not exactly this but this kind of
  3. Replies
    3
    Views
    191

    minolta bizhub 600 firmaware

    my bizhub 600 copier is not booting. it show wait icon.please can any one give me its firmware .
    zahidpak93@yahoo.com
  4. network stting does not show in administrator seeting

    i was using bizhub 600 as a printer but after turning off dhcp the network setting does not show any more so i cant connect to it from pc.
  5. Replies
    1
    Views
    150

    bizhub 600 toner tank gear problem

    i have replaced 3 times the tone tank gear. the gears. the gears does not rotate smothly.what is the cause of it.
  6. Replies
    5
    Views
    404

    Re: Xerox5765 bypass tray problem

    Thanks you have fixed my problem. The small spring was lost.
  7. Replies
    5
    Views
    404

    Re: Xerox5765 bypass tray problem

    Please upload the picture if you have it
  8. Replies
    5
    Views
    404

    Xerox5765 bypass tray problem

    Xerox wc 5765 make noise when copying from bypass tray and also it will pick multiple papers at once.
  9. Replies
    3
    Views
    292

    bizhub 600 jame code 3202

    please find me the solution for jame code j-3202.
  10. Replies
    5
    Views
    405

    Re: bizhub web solenoid not working

    i have done that but no luck
  11. Replies
    5
    Views
    405

    bizhub web solenoid not working

    bizhub 600 web solenoid is not working.
  12. Replies
    1
    Views
    365

    xerox 5765 problem

    xerox 5765 show replace xerographic module . the fault code is 03-320.xerographic mudule is 220 % remaining and life is 0 day.
  13. Replies
    3
    Views
    435

    Xerox 5765 alignment problem

    I have xerox 5765 in duplex print the front print is upward from the back side
  14. Xerox code 08-100 lead edge late to paper feed module

    Xerox 5765 always jamming between the drum and heater and give code 10-102 and 08-100
  15. Thread: paper jam

    by Gulbadin
    Replies
    1
    Views
    369

    paper jam

    xerox 5765 paper jam problem in the fuser .code is 10-102 and 08-100.please help me solve the problem
  16. Replies
    2
    Views
    587

    bypass tray paper jam xeox 5765

    after replacing bypass tray the copier is power on with noise from bypass tray.and also when i print it make noise and give jam.please tell me what i have done wrong inreplacing.
  17. Replies
    3
    Views
    261

    [Misc] Re: skewd copy bizhub 600

    yes the paper is fed from bypass tray
  18. Replies
    3
    Views
    261

    [Misc] skewd copy bizhub 600

    38903
    when i copy on A6 paper the result is crooked skew on bizhub 600.on A4 paper the copy is fine
  19. Replies
    0
    Views
    263

    Xerox energy problem

    I have Xerox 5765 and it get too much energy so it would not work on generetor because it can't get such load.is there any method so it can work on low power
Results 1 to 19 of 19