Search:

Type: Posts; User: Synthohol

Page 1 of 20 1 2 3 4

Search: Search took 0.12 seconds.

  1. [Misc] Re: Copyright Error Message when Copying a document the customer has rights too

    the BRU may be triggered?
    anyway, scan every page to a PDF then print the PDF.
    just saying...
  2. Replies
    3
    Views
    106

    Re: Minolta C754 pro (turn on controller)

    if the led says 00 its usually fine, the onboard video does not work past the bios so see if you can see it in CWS or its web page. if so the fiery is fine.
    there is a firmware downgrade that may...
  3. Replies
    12
    Views
    266

    Re: minolta bizhub c368 custom size issue

    try C5 (envelope) 6.4x9 and always SEF
  4. Replies
    4
    Views
    145

    where is the darn download? (easy lock)

    i have a 5052ci and customer wants to lock down color only unless a password is used.
    easy lock (color lock) i see the solution on KFS but no download link.
    what am i missing?
    and yes i have a...
  5. [Jamming] Re: bizhub C458 from Tray 2 Jam-code 12-01 (feed roller didnīt rotate)

    those finned roller are as useless as roadkill lizard, pop a regular red roller on it and you have no more skimming jams.
    that IMHO was konicas biggest error.
    they are ok for glossy paper but any...
  6. Replies
    11
    Views
    1,161

    [Error Code] Re: Bizhub 654e , firmware update error

    the main memory stick is proprietary afaik, and its ddr3 if memory serves (pun intended)
    borrow one from another 4 series machine and see if that helps.
    if still same thing your mfp board may be on...
  7. Replies
    11
    Views
    1,161

    [Error Code] Re: Bizhub 654e , firmware update error

    there is no "fix"
    you buy a new one from konica.
    you can try reseating it first or swap it with another from another machine to eliminate it as the cause.
    did you try disconnecting ALL the...
  8. [Electrical] Re: power on external vending device Bizhub c308

    thanks for the update. its nice to close a case
  9. Replies
    5
    Views
    182

    [Dead] Re: KM c6500 fiery ic-408 software problem

    to the copier port on the fiery right? not the LAN port.
  10. Replies
    5
    Views
    182

    [Dead] Re: KM c6500 fiery ic-408 software problem

    did you flip the switches?
    did you plug the ethernet into the copier port on the fiery?
  11. Replies
    2
    Views
    191

    [Electrical] Re: Pwb and memory boards

    Factory Authorized Circuit Board Repair by Hytec Dealer Services, Inc.

    Even konica uses them.
  12. Replies
    7
    Views
    335

    Re: Minolta magicolor 5670 copy quality

    is the fuser roller pressure even?
    almost looks wet the way the logo is drooling ;)
  13. Replies
    13
    Views
    465

    Re: ISW on 4 series and above

    what kind/size flash drive?
    4G or less i hope.
  14. Replies
    13
    Views
    465

    Re: ISW on 4 series and above

    thats the 8 series not the 4 series (just for clarification) 8 series the USB goes in the control panel USB and the 4 series its a USB service port on the side of the MFP board hidden by a plate and...
  15. Replies
    13
    Views
    465

    Re: ISW on 4 series and above

    no ISW anymore for a while.
    just extract the files on to the root of the flash drive and boot with it plugged into the covered service port in the back.
  16. [Error Code] Re: MF222Plus / Bizhub C224e HDD enquiry (C-FA14)

    red flags across the field!!

    honestly, let the copier format and check it.
    its not a windows file system.
    best you can do at a PC is if after checking the HDD, remove the partition(s) and create...
  17. Re: Transfer user box files from C454 to C754

    as you wish :)
    i think this is what you asked for?
  18. Re: C452- Machine making a loud noise non stop

    take a look at the bottom gear circled, usually the axle (hole) wears out and the gears make a racket as they sloppily mesh....
  19. Replies
    20
    Views
    695

    [Misc] Re: konica minolta bizhub 754 ghost image

    copyman, the font is different in the shadow. if it was a drum belt or fuser the shadow would be exactly the same and lined up with the image it pulled it from off a roller.
  20. Replies
    2
    Views
    480

    Re: Fiery patch downloader

    if you are getting a (Code 10) error there is a patch for that.
    also, its over 10 years old, windows XP is not supported at all anymore.
    if you have upgraded it to windows 7 (paid upgrade) you...
  21. Replies
    20
    Views
    695

    [Misc] Re: konica minolta bizhub 754 ghost image

    ive seen this kind of thing before, there is likely a layer of the (previous) header under the current header layer and when the pdf was flattened it bled through.
    try another program to print from,...
  22. Replies
    20
    Views
    695

    [Misc] Re: konica minolta bizhub 754 ghost image

    landscape left is not an good description.
    when the paper exits the machine does it come out short edge first or long edge first.
    portrait and landscape describe the orientation of the image.
    the...
  23. Replies
    20
    Views
    695

    [Misc] Re: konica minolta bizhub 754 ghost image

    does not line up and the font of the shadow appears smaller.
    did you print that lef or sef?
  24. Replies
    11
    Views
    837

    Re: Embedded Fiery running windows 8!!

    had a 67 firebird, racked up close to 20 DMV points, and lost my license 3 times because of that car.
    [\obsession]



    i only consider contributors for sharing files, sorry.
  25. Replies
    11
    Views
    837

    Re: Embedded Fiery running windows 8!!

    and another fiery converted to a win8 workstation in the works.
    i gotta stop....
    cant...
    help..
    myself.
    ...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4