Search:

Type: Posts; User: adeyemi

Page 1 of 14 1 2 3 4

Search: Search took 0.10 seconds.

  1. Replies
    6
    Views
    193

    [Misc] Re: WC 7655 head scratcher... makes no sense.

    I believe you should focus more on the network controller than the machine. Start by making sure that the data cable between machine and controller is properly connected; try another cable if need...
  2. Re: WC 7775 cannot recognize drums and toner after sw reload

    Someone out there plzzzz?
  3. [CQ] Re: Xerox 700 image issues after replacing drums

    Since it was working fine before changing drums, the new drums will be my first suspect. I'll put back the old ones to see what happens. If the old chips counted out, use the chips on the new set....
  4. Re: WC 7775 cannot recognize drums and toner after sw reload

    Pls anyone with a working nvm on this machine that can be sent to me??? I'll appreciate this very much
  5. Re: WC 7775 cannot recognize drums and toner after sw reload

    Waoh! What a machine!!!
  6. Re: WC 7775 cannot recognize drums and toner after sw reload

    Thanks for this comprehensive response. I guess you are right about the items it declared incompatible (R3 & R4 drums and Yellow toner)as being close to end of life before the software reload. So if...
  7. WC 7775 cannot recognize drums and toner after sw reload

    The WC7775 harddisk crashed and stopped booting, so i had to replace it. I also had to reloaded the software via altboot after changing the hd. Thereafter it booted up but started to complain about...
  8. Replies
    5
    Views
    376

    Re: Xerox J75 error 47-320

    Its the LP (light production) finisher.
  9. Replies
    5
    Views
    376

    Re: Xerox J75 error 47-320

    Was fully operational until this started, so its sure the right finisher, thanks.
  10. Replies
    5
    Views
    376

    Re: Xerox J75 error 47-320

    Thanks InterfaceP, i have an interface module well connected and correctly powered. The whole unit was actually working, the issue just developed recently.
  11. Replies
    5
    Views
    376

    Xerox J75 error 47-320

    Aside from the finisher board, what else could be responsible for 47-320 on J75?
  12. Replies
    0
    Views
    178

    Xerox J75 Fiery deletes jobs

    Xerox J75 with external fiery controller prints well when the D-finishers are connected but if output tray is connected, the jobs automatically gets deleted after processing on command work station.
  13. Replies
    1
    Views
    247

    IC308 with Konicaminolta C1070

    Hello People,
    I have an IC308 connected to a KonicaMinolta C1070 that after booting up cannot connect with the machine. Keeps saying establishing connection. Anyone seen this before? Thanks
  14. Replies
    0
    Views
    433

    Docucolor700 Fault 042-317

    I have a 042-317 fault on a Docucolor700. The edoc identified this to be related to an AC fan fault which from my check seem to be working well. Any further suggestion from anyone who may have...
  15. Replies
    3
    Views
    525

    Re: Fiery IC308 system software cd2 and cd3

    Thanks Synthohol. Like you rightly observed EFI has practically no help on this and i still don't understand the logic in Km providing only one cd. As it were, its only someone out there that still...
  16. Replies
    3
    Views
    525

    Re: Fiery IC308 system software cd2 and cd3

    Still anticipating the response of a nice guy out there, plzzzzz
  17. Replies
    3
    Views
    525

    Fiery IC308 system software cd2 and cd3

    Hi all, i got the ic308 system reload software cd (v1.1 and 2.1) from a good friend but both requires a 2nd and 3rd cd to complete the reload. Anyone that can help out with these will be highly...
  18. Replies
    0
    Views
    279

    Fiery EX-250 Vs Fs-450

    I have an old Xerox Docucolor 250 with an external fiery Ex-250 print controller that requires software reload. Unfortunately my Ex-250 system software cd has gone bad. Im wondering if anyone out...
  19. Replies
    0
    Views
    715

    Fiery EX-250 Vs Fs-450

    I have an old Xerox Docucolor 250 with an external fiery Ex-250 print controller that requires software reload. Unfortunately my Ex-250 system software cd has gone bad. Im wondering if anyone out...
  20. Replies
    1
    Views
    1,228

    Fiery EX-250 Vs Fs-450

    I have an old Xerox Docucolor 250 with an external fiery Ex-250 print controller that requires software reload. Unfortunately my Ex-250 system software cd has gone bad. Im wondering if anyone out...
  21. Which is better between Xerox and Konicaminolta production printers

    Which in your own view and experience is the better brand in term of stability and print quality between Xerox and Konicaminolta production digital printers?
  22. Replies
    4
    Views
    974

    Re: KM C8000 Fiery IC-306 System Software

    Pls from which KM portal can i download the V1.0 and V3.01, infohub? I searched could not find. Pls help. Thanks
  23. Replies
    1
    Views
    482

    IC306 on C8000 crashed

    Hello people, i need to reload an IC306 (Model: Pro80-12) controller for a C8000. I got one system and user sw from a kind friend, but it seem to be a different version from mine because it actually...
  24. Replies
    0
    Views
    194

    IC306 on C8000 crashed

    Hello people, i need to reload an IC306 (Model: Pro80-12) controller for a C8000. I got one system and user sw from a kind friend, but it seem to be a different version from mine because it actually...
  25. Replies
    0
    Views
    1,021

    HP M806 Error 59.00.A0

    Can anyone assist on this fault error on an Enterprise Laserjet M806Dn: 59.00.A0
    Thanks
Results 1 to 25 of 340
Page 1 of 14 1 2 3 4