Search:

Type: Posts; User: guitar9199

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. Thread: Training

    by guitar9199
    Replies
    2
    Views
    62

    Re: Training

    Not 100% sure...but several companies have East Coast training centers in Atlanta. That'd be my guess.
  2. Replies
    2
    Views
    83

    Re: DNS Error sending email

    The MPS5502 series machines were released in 2013, so it it likely that it would require a firmware update in order to communicate with the updated SSL/TLS settings in Office365. I'm not sure of the...
  3. Replies
    3
    Views
    75

    [Misc] Re: IMC Series Supervisor Password

    Not yet, but we don't have that many IMC Series machines out there yet. Thanks for the heads up though....will keep an eye out.
  4. Replies
    4
    Views
    145

    Re: MPC307spf Android panel went dead

    If the panel works on another machine, I don't think the panel would be the issue...but it never hurts to reflash the machine's firmware.

    A lot of times it's either a corrupt file in the...
  5. Replies
    6
    Views
    146

    Probing Questions.... a Lost Art!!

    Service call on the board... "Customer can't scan!"

    ...Customer is about 50 miles away, so phone call initiated.

    Tech: I understand you're having a scanning issue on your copier.

    Cust:...
  6. Replies
    9
    Views
    192

    Re: Speed up printing help

    +1 on the "Print As Image". Some of those CAD files have so many layers in them, and most print drivers will process each layer one at a time before printing. Print As Image knocks everything down...
  7. Replies
    10
    Views
    405

    Re: Best way to remove yellowing?

    My boss used to tell the customers, "That's the 'Gold Package' upgrade. We normally charge extra for that, but we're throwing it in as a 'Valued Customer' bonus!"

    ...not sure if anyone actually...
  8. Replies
    39
    Views
    1,355

    Re: And the correct response is....

    Canon iR5050 in a High School... service call for paper not feeding.

    I arrive to find someone had loaded FULL reams of paper in the tandem tray..... WITHOUT removing the wrapper.

    My "snarky"...
  9. Replies
    3
    Views
    263

    Re: IR3300 DISPLAY PROBLEMS

    If you start seeing the control panel "Hang" like that again, try removing the Network cable and see if the issue doesn't clear up. Canon's are notorious for not LIKING "Power Over Ethernet", and if...
  10. Replies
    13
    Views
    772

    [Dead] Re: Ricoh SP C440

    It almost sounds to me like the controller is stalling. When in doubt, reseat all the connectors and boards and see if anything changes.
  11. Replies
    7
    Views
    466

    Re: RicohFirmware

    C3502 and MP 301?? I wouldn't use an SD card larger than 2 GIG on them! I don't think the controller on the machine will recognize anything more than 2 Gig. Once you get to the "3" series and up,...
  12. Replies
    6
    Views
    348

    Re: Canon C2030 Gear Skipping

    I had one that the noise was caused by the ITB, another couple that had a fuser gear that was wonky...but the remaining ones I had that gave me that noise was usually a drum unit that was the...
  13. Re: MP3554 type machine with Smart Op Panel- Add Fax icon

    It SHOULD be under the Long Hold "Classic Apps" under "Classic Fax". If it's not there, you might need to update the copier firmware and SOP system software.
  14. Replies
    3
    Views
    413

    Re: Ricoh 3235C dirty copies at power on

    Transfer cleaner shot.

    A 14+ year old machine can be made to work as long as parts are available....but for how LONG those parts are available? If you order a part and it comes back as "No Longer...
  15. Replies
    10
    Views
    502

    Re: MP c4500 copy quality problems

    The model was released in 2006. I would recommend a replacement....13 years is a little old for those machines. I'm not certain WHEN... but parts availability WILL be an issue sooner rather than...
  16. Thread: Mpc5000 hdd

    by guitar9199
    Replies
    4
    Views
    220

    Re: Mpc5000 hdd

    You can try...

    https://www.iteminconline.com/d3625170_d3625170-d362-5170-ricoh-spc430-pcb-hdd.htm
  17. Thread: Mp c6004

    by guitar9199
    Replies
    44
    Views
    2,219

    Re: Mp c6004

    107 is for the older machines.

    Are you pressing and HOLDING the "C" button for about 5 seconds? It's not just a tap.
  18. Replies
    2
    Views
    237

    Re: Increase PCL driver print speed

    If you're printing a PDF, going into the "Advanced" settings and checking the "Print As Image" box will speed up printing. Instead of having to process the individual layers of a PDF, it flattens...
  19. Re: What did you do before you were the copy guy or girl?

    Started out as a "Dish-Dog" while attending tech school to be an electrician. Got my degree and found out I wasn't going to get an apprenticeship because I didn't have an "IN" with the Union. Got...
  20. Re: What Muslims in Canada really thinl about Canada

    "Not all Muslims are terrorists...but lately it seems that all terrorists have been Muslim."

    See, when you only look at one side of a story, you're not getting the WHOLE picture!!




    Media...
  21. Replies
    11
    Views
    635

    [Misc] Re: Operation disabled

    Can you get into settings standing in front of the machine?
  22. Re: Printing b&w reversed when printing from Mac preview and Kiwi

    Did he update the print drivers as well? Macs are notorious for print drivers breaking from one OS version to another.
  23. Replies
    4
    Views
    460

    Re: Transfer belt error

    Yes..it's common. Check the Canon eSupport grid for any E075 countermeasures for that model. The fixes are as simple as making sure the machine is completely level, and go as complicated as...
  24. Re: Need an Image controller for Konica Minolta bizhub PRO 950

    Interesting. I thought it was along the lines of the IC-414 on the C224/C284/C364/etc. series.

    ...Learn something new every day. Thanks.
  25. Replies
    11
    Views
    735

    Re: SMB scanning on windows server 2003

    Check your network settings. I've seen some cases where if you don't have the MFP on the same Workgroup/Domain, it'll block SMB. You might also want to either match the DNS settings to what the...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4