Search:

Type: Posts; User: stek

Search: Search took 0.06 seconds.

  1. Replies
    16
    Views
    471

    [Misc] Re: Ricoh MP 3045 toner light

    Going to try some of these suggestions. I will post my findings. Thanks to all!
  2. Replies
    16
    Views
    471

    [Misc] Re: Ricoh MP 3045 toner light

    I will double check the toner type but they get it from us...
    Thanks!
  3. Replies
    16
    Views
    471

    [Misc] Re: Ricoh MP 3045 toner light

    Thanks! Yes the hopper is new!
    Thanks!
  4. Replies
    16
    Views
    471

    [Misc] Re: Ricoh MP 3045 toner light

    Thanks! I did check for a plug. I did initialize the dev too. Would the dev initialize with a bad TD sensor?
    Thanks again!
  5. Replies
    16
    Views
    471

    [Misc] Re: Ricoh MP 3045 toner light

    Thanks! Yes I used the proper Ricoh developer. I can hear the machine trying to add toner but I did'n take a visual. I will try this next.
  6. Replies
    16
    Views
    471

    [Misc] Re: Ricoh MP 3045 toner light

    The developer is new and the drum has less than 20k
  7. Replies
    16
    Views
    471

    [Misc] Ricoh MP 3045 toner light

    Hi all!
    Have a Ricoh MP3045 with a toner light that won't go out. After the toner was replaced we replaced developer and the toner tray mechanism. The machine is able to add toner in service mode...
  8. Thread: Xerox 123

    by stek
    Replies
    0
    Views
    107

    [Jamming] Xerox 123

    Here's a good one! Xerox 123. Tray 1 works perfectly. Trays 1,2,3 and bypass will only make 1 copy at a time. If multiple copies are attempted it will Z fold but not jam. Instead comes up with a...
  9. Replies
    7
    Views
    1,767

    Re: Riso GR3770 clamp error/master mis-feed

    Hey,
    You could also go into service mode and activate the master cutter several times to see if it fires every time. I haven't needed to replace a master feed roller very often but it does happen.
  10. Thread: Xerox 123

    by stek
    Replies
    0
    Views
    159

    [Jamming] Xerox 123

    Here's a good one! Xerox 123- Tray 1 works perfect. Tray 2,3,4 and bypass will only make one copy at a time. If multiply copies are attempted on tray 2,3,4 or bypass it will Z fold but not jam,...
  11. Replies
    4
    Views
    287

    Ricoh 2020D shading on back of copies

    Hello!
    I have a older 2020D with a image problem. On the lead edge ( back of copies) is a half inch shaded band. This only happens on the first copy. The rest are perfect! New durm/blade, new fuser...
  12. Replies
    5
    Views
    576

    Re: Canon 7105 finisher

    Yes. Paper is exiting the to the top tray while the bottom tray proceeds to move up and down constantly. Can I post MP4 video's?
  13. Replies
    5
    Views
    576

    Canon 7105 finisher

    Hello!
    Have a canon 7105. When copies are exiting the finisher (top gate) the bottom gate will proceed to move up and down constantly. It does not seem to jam though. It will also drop to the floor...
Results 1 to 13 of 13