Search:

Type: Posts; User: axyun

Page 1 of 20 1 2 3 4

Search: Search took 0.12 seconds.

  1. Replies
    7
    Views
    487

    Re: M6526cdn with error C6000

    Went back + reexamined and fuser unit pressure roller release gear missing + swapped withgear form other fuser.

    Consistent jamming coming out of fuser due to little jam sensor board that fuser...
  2. Replies
    7
    Views
    487

    Re: M6526cdn with error C6000

    the box said fk-590 and the fuser appeared to be same with same connectors. i had noticed on old fuser the thermostat was blown. I could swap thermostat with new one from replacement fuser and see...
  3. Replies
    7
    Views
    487

    Re: M6526cdn with error C6000

    It looks like the pins are supposed to be exposed after checking part. Just surprised because usually pins are enclosed in connector. Any help with error C2340 is appreciated. Was I supposed to do...
  4. Replies
    7
    Views
    487

    Re: M6526cdn with error C6000

    changed fuser today but now have error c2340. The white 3 pin connector has the 3 pins exposed as though side of connector was broken off. The female from fuser appears
    to still connect to 3 pins...
  5. Replies
    7
    Views
    748

    Re: MX-M904 with flasing power indicator

    Thank bilyahn + mojorolla for your info. As I had no experience on this machine and have noit expertise I told customer to look for someone with experience on this model. Frank
  6. Replies
    7
    Views
    748

    Re: MX-M904 with flasing power indicator

    i may have to call customer and pass on this call. Thank you
  7. Replies
    7
    Views
    748

    MX-M904 with flasing power indicator

    Custome called saying issues with finisher , jamming etc. When stopped by this morning there was no display. The power indicator is flashing.

    Have never serviced this machine. Tried pressing home...
  8. Replies
    7
    Views
    487

    Re: M6526cdn with error C6000

    Thank you Santander.
  9. Replies
    7
    Views
    487

    M6526cdn with error C6000

    Customered called and scheduling for tomorrow. Error C6000 on M6526cdn. CkeckedSM and see no reset such as U163 used in other machines so

    will check fuser unit usual suspects. Anything I should...
  10. Replies
    2
    Views
    145

    Re: workcentre m118 display blacl

    Went to customer yesterday and screen is not black. It is a blank screen. I removed control panel and checked connectors and reinstalled. The

    screen came back and was okay for about a couple of...
  11. Replies
    2
    Views
    145

    Re: workcentre m118 display blacl

    ​If control panel is needed anyone with a good used unit . Is display available separately?
  12. Re: TA3551ci with time for maintenance (A) casette 3

    Thank you JCarlucci + Darry. I suspected as much but not sure as I was away from my computer and my flash drive with service manual for TA3551
    had zero bytes as when I copied to flash drive I was...
  13. Re: is there diff w/ AR M277 and AR M317 DV unit?

    I would think if there is a difference it is probably minor as the part # for AR-M277 dv unit is CBOX-0001JS5G and the part # for AR-M317 dv unit is CBOX-0001JS5K
  14. TA3551ci with time for maintenance (A) casette 3

    On TA3551ci Time for Maintenance (A) and Casette 3. I understand machine wants maintenance kit A (MK-8505A) changed. Why is Casette 3 also coming up.
    The tray was empty and I filled it and it...
  15. Replies
    2
    Views
    145

    workcentre m118 display blacl

    workcentre display is black but machine works. Is the display available by itself. I saw whole control panel 802K66230 in service manual. Just got call today

    and have not seen machine yet. Cusomer...
  16. Replies
    2
    Views
    128

    Re: IR2010F continous message of:mixing toner:

    thank you for your service copier tech
  17. Replies
    2
    Views
    128

    IR2010F continous message of:mixing toner:

    Ir2010F message of "TONER MIXING" when machine is turned on. I wait several minutes for message to go away but it remains. The toner cartridge has plenty of toner. I am unfamiliar with this and have...
  18. Replies
    6
    Views
    839

    Re: Irc5045 jam code 0103 from tray 4 only

    It seems the lower door may have been slightly warped due to customer intervention. Noticed when i pressed against it the paper always went through.
    I improvise something with door to cause more...
  19. Replies
    3
    Views
    418

    Re: TA3551ci with error c2201 + F345

    saw no issue with wast auger. Replaced black drun unit and smudges went away as did the c2201 errors. Ran about 300 pages. Did not seee f345 error and as you have mentioned probably due to scanning...
  20. Replies
    3
    Views
    418

    Re: TA3551ci with error c2201 + F345

    Thank you JR . I customer has told me over hone that they have been getting
    C2201 codes since day before I came. Evidently they print and copy as it does
    not occur thvery consistently. I ran sbout...
  21. Replies
    3
    Views
    418

    TA3551ci with error c2201 + F345

    Was at customer yesterday on TA3551ci. They called about consistent jamming. There was small piece of folded
    paper in delivery unit before finisher bridge. I removed and noticed damaged fuser...
  22. Replies
    6
    Views
    839

    Re: Irc5045 jam code 0103 from tray 4 only

    Only jams from tray 4

    all sizes jam from tray 4
    did not do a service mode i/o sensor .----not familiar with procedure
    swapped trays and still jams from tray 4 so not a tray problem
    lams from...
  23. Replies
    6
    Views
    839

    Re: Irc5045 jam code 0103 from tray 4 only

    Thanks for input Teckat. I am only one servicing machine in last year. Have not removed any connectors except on tray 4 pickup asm which I just changed due to the jamming Customer is over 20 miles...
  24. Replies
    6
    Views
    839

    Irc5045 jam code 0103 from tray 4 only

    tray 4 jams at tray 2 registrstion area with jam code 0103. All other tray work great. Frsnk
  25. Replies
    8
    Views
    1,745

    Re: mx-m232d need part number for spf glass

    still waiting for CFIX-0022RS55. Was told eta of 7/3/18. In the parts guide there are 2 parts numbers . One (CFIX-0022RS54) has a C for correctio next to it and the other(CFIX-0022RS55) has an...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4