Search:

Type: Posts; User: alamsandhu

Page 1 of 8 1 2 3 4

Search: Search took 0.11 seconds.

  1. Re: YSoft SafeQ6 unable to connect to application for scanning (BHC266 only)

    done by changing open API version from 4-13a to 4-2 40600
  2. YSoft SafeQ6 unable to connect to application for scanning (BHC266 only)

    Hi
    YSoft SafeQ6 MU22 once touch to scan, the message shows unable to connect to application for scanning, only for BHC266, Printing is working fine...
    BHC 458 print and scan (FTP,WebDave,Email) is...
  3. Re: Error Code C-C101 while installation of BHC 8000 on 1st turn on

    Replaced Image Processing Board working fine but surprised it is brand new Machine.
  4. Replies
    11
    Views
    1,516

    Re: Whats wrong with this picture?

    Swap the Separation roller to pick up roller!
    wrongly installed.

    thanks
  5. Re: Error Code C-C101 while installation of BHC 8000 on 1st turn on

    Removed all options just in the basic engine now error is C-4725 and 2nd fusing shows on the display even not connected.
  6. Error Code C-C101 while installation of BHC 8000 on 1st turn on

    Error Code C-C101 while installation of BHC 8000 on 1st turn on.
  7. Replies
    1
    Views
    464

    CSES and bslj.konicaminolta

    KONICA MINOLTA INC. BSLJ-WEB
    KNOVA
    Login
    not working anymore
    anyone can help for the new link ?

    thanks
  8. Re: Accurio Press C6100 installation not detecting the RU-518, LU-202 XLm and MB-508

    Replaced the RU-518 with another new one everything is working fine. The Launch event is completed with New another RU-518 but still need to find what is problem with RU.

    Thanx
  9. Replies
    6
    Views
    531

    [Misc] Re: SSL Settings

    try to access by Internet Explorer 9 or 11 then create the certificate again.

    Thanks
  10. Re: Accurio Press C6100 installation not detecting the RU-518, LU-202 XLm and MB-508

    Strange thing there is no dipsw for any option after reconnecting all the connections and Boards in the Engine and updated the firmware it starts working but We have another issue with banner...
  11. Replies
    1
    Views
    353

    [Error Code] Re: J-3103 on C8000

    Replace the All Clutches & Tarque Limiters from front and backside in ADU and check the plastic guide plate if any damage or cut due to paper. Replace the guides and clean the rollers under ADU....
  12. Re: Ic605 konica 3070L can't connect to color and job centro

    Check the Print & Hold is working properly ?
    Format the HDD correctly and then try to connect.

    Thanks
  13. Accurio Press C6100 installation not detecting the RU-518, LU-202 XLm and MB-508

    Accurio Press C6100 while installation not detecting the RU-518, LU-202 XLm and MB-508.
    1- followed the installation Procedure for installation
    2-updated the firmware to G20 then only RU-508...
  14. need network scaning without sharing folder

    Client has restricted to share the folder in the network. SMB stopped working, is there any way to configure Scan to PC without sharing the folder.. like Sharp desk, but want to use for Konica...
  15. why Yield life is different for the Same Drum & DV Unit in different Models

    i need clear Idea why Yield life is different for the Same Drum & DV Unit in different Models.
    38374
  16. BH C1085 Press always damaging the Lower Fusing Roller

    Bizhub C1085 Press always damaging the Lower fusing Roller (every 100 K) from the by the paper dust sticking on the temperature sensor protection cover. I have reduced the thickness by rubbing the...
  17. Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    Thanks to all
    found the right door locking hook was loosen and door was vibrating,shaking from the lock position that causing the leakage. Fixed the locking hooks by tightening the screws and...
  18. Replies
    5
    Views
    802

    Re: Default Printer ERROR

    user credentials issue create another user and install via that user it will work
  19. Replies
    3
    Views
    292

    Re: Magic color MC4690 showing error 0094

    I have done in MC1690 but MC 4690 is different than.
  20. Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    as i mentioned machine is working and this message is coming once or twice in a day intermittent and disappear after several restart and open close the door. every time customer calls with the same...
  21. Replies
    3
    Views
    292

    Magic color MC4690 showing error 0094

    one of my Team member facing issue Magic Color MC4690 showing error 0094.
    checked for the connection and cleaned the sensor as well replaced the transport motor but still the same.
    any Idea
  22. Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    removed the belt is fine even tested with old belt its the same.
  23. Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    refitted and cleaned the terminals as well the spring connections to DV & Drum units. it works fine but intermittent error comes once or twice in a day. after restarting and open close the door...
  24. Re: BH C454e after replacing ITB message coming Drum unit and DV unit installation er

    Machine was working fine just the ITB life was finished.
    it was power on during replacement it doesn't matter for the new Release articles.
    even after replacement machine was working for 1 day and...
  25. Replies
    8
    Views
    713

    [Error Code] Re: Error code C-225B

    DCPU and PC motor (Main Drive),,
Results 1 to 25 of 188
Page 1 of 8 1 2 3 4