Search:

Type: Posts; User: printlessguy

Page 1 of 2 1 2

Search: Search took 0.07 seconds.

  1. Re: Kyocera/copystar developer question please.

    thanks for the info guys. will check into the updates for the 2551's I presume there are bullitens on the support site?
    thanks again
  2. Kyocera/copystar developer question please.

    ok i have now seen this on 5 machines 2 cs 2551ci's and 3 cs 406ci's.40551 this seems to happen with varying degrees or multiple places on the page. all of these machines the company I work for has...
  3. Re: Samsung SCX-6545N Lines when scanning through ADF

    thank you all for your insight. they are using oem toner and drum. we supply them. and this is the main machine that they use for everything. I think I will try the bring a stack of originals from my...
  4. Re: Samsung SCX-6545N Lines when scanning through ADF

    the reason for air flow thought is the scanner glass seems to get abnormally hot and it looks like toner spots on the adf glass. the vent hole is a poor design by the company. they make a place for a...
  5. Samsung SCX-6545N Lines when scanning through ADF

    Hello all and thanks for all your thoughts on this. Have A client who has a scx-6545N that for the most part works great. the issue seems to be with ADF Scanning. the power save settings are set to...
  6. Replies
    10
    Views
    1,537

    Re: Sharp AR-M160 doc feeder issue

    thank you for all the information and thoughts. i may be thick headed but if I put the feeder on a similar machine and it works perfect how can it be a problem with the feeder?
  7. Replies
    10
    Views
    1,537

    Re: Sharp AR-M160 doc feeder issue

    more info put both feeders that dont work on the arm160 on a arm205 and both work mcu pwb?
  8. Replies
    10
    Views
    1,537

    Re: Sharp AR-M160 doc feeder issue

    ok more info.
    run sim 2-2 with machine in an ok state. bypass light is on and tray 2 light. get out of sim mode. make copy from adf. paper jams right at top sensor, and a blank copy comes out. jam...
  9. Replies
    10
    Views
    1,537

    Re: Sharp AR-M160 doc feeder issue

    My boss loves D-ink too but they went out of business in november and there is none to be found. I did tear 2 feeders apart and clean all rollers and sensors. but on both feeders the paper stops just...
  10. Replies
    10
    Views
    1,537

    Sharp AR-M160 doc feeder issue

    Hello all got one that is stumping my boss and I.
    have an ar160 that the doc feeder has new rollers in it but is not passing paper. it pulls it in to just past the paper sensor before the second...
  11. Re: Copystar CS406CI locks up and program loading problems

    thanks for all the input. right now we are seeing what insurance will say. and go from there. took fax card out of machine. and have set power save to 1 minute. wake by it every so often and wake it...
  12. Copystar CS406CI locks up and program loading problems

    Good day all.
    Have a frustrating one.
    Client has a Copystar CS406CI. When it works it works fine across the board. but the issue is. they had the machine working in one location. and they moved it...
  13. Replies
    3
    Views
    385

    [Misc] Re: HP scanjet Enterprise 8500 FN1

    the blacked out is the ip of the computer. I have public sharing turned on and password protected off.... any thoughts?
  14. Replies
    3
    Views
    385

    [Misc] HP scanjet Enterprise 8500 FN1

    Hello All does anyone have any experience with this device I am having some connection/network share issues that just creeped up after the machine worked for several years. it is in a home network...
  15. Replies
    16
    Views
    1,225

    [Misc] Re: SLOW PDF PRINTING ON M2552ci

    not enough coffee in brain yet.
    i am guessing hard code ip's into laptop and printer and use a cross over cable correct?

    and also the spooling to the printer is timely. it when the job is...
  16. Replies
    16
    Views
    1,225

    [Misc] Re: SLOW PDF PRINTING ON M2552ci

    I work with Vito and here is some more info.
    upgraded firmware to newest from Kyocera.
    plug usb into printer with same file. is a 16mb pdf. choose 12x18 paper in 2 minutes 15 pages print out then I...
  17. Replies
    4
    Views
    375

    Re: Designjet 500 magenta head issues

    thank you all for your input. I will give the client the information and see what they want to do. since they predominantly print b&w it is not to much an issue but will see where this goes.
    thanks
  18. Replies
    4
    Views
    375

    Designjet 500 magenta head issues

    Good Morning all and thanks for help and ideas in advance.
    I have a client with a DJ 500 42" that was having a black printhead error saying to replace it. looked at all heads dates and found all out...
  19. Replies
    7
    Views
    632

    [Misc] Re: ECOSYS M6530cdn slow printing

    well updated the firmware. no change. found a spring under the printer found it goes in the pick roller assembly. and started working fine. not complaining but .....huh? wasn't jamming or mis feeding
  20. Replies
    7
    Views
    632

    [Misc] Re: ECOSYS M6530cdn slow printing

    hmmm that is an interesting thought might have to try that
    thanks
  21. Replies
    7
    Views
    632

    [Misc] Re: ECOSYS M6530cdn slow printing

    Hi Vito its me Andy this is our issue
  22. Replies
    7
    Views
    632

    [Misc] ECOSYS M6530cdn slow printing

    Hello All any thoughts or help would greatly be appreciated. a client of mine has an ECOSYS M6530cdn up untill a day or 3 ago no real issues other than user related. what happened now is copys,...
  23. Replies
    12
    Views
    1,057

    Re: Ricoh MP C2500 Dark Display

    thanks I thought so but wasn't sure. is there a preferred software or just use adobe ?
  24. Replies
    12
    Views
    1,057

    Re: Ricoh MP C2500 Dark Display

    thanks for all the information everyone. the user is going to think about the repair. another question would be can this still be used as a scanner but from the PC pulling the scan verses the...
  25. Replies
    12
    Views
    1,057

    Re: Ricoh MP C2500 Dark Display

    Hey Polarbear any hints on where to get one? I dont see the part number in the parts manual. so I am guessing its a non standard repair
Results 1 to 25 of 26
Page 1 of 2 1 2