Search:

Type: Posts; User: mincopier

Page 1 of 4 1 2 3 4

Search: Search took 0.07 seconds.

  1. Replies
    11
    Views
    291

    Re: Account track on Mac

    It's just the same old Ford vs Chevy, Android vs iPhone, etc.. All what you are used too.
  2. Replies
    11
    Views
    291

    Re: Account track on Mac

    This is exactly what we do. I usually use Notes to create my presets. The way the Mac menus system is for printing it seems alot easier for the customer to just choose a B&W or Color preset instead...
  3. Replies
    5
    Views
    206

    Re: Toner Coverage Calculator

    Not a utility but here is an online calculator:
    FREE Online Ink & Toner Coverage (Consumption) Calculator – dejaWorks
  4. Replies
    7
    Views
    183

    Re: Logical format is stuck at 0%

    If the error has not been resolved by the previous steps, run the Self-diagnostic function to see if there are issues with the eMMC or MFP board.

    Procedure (using SERVICE MODE menu)
    1. Call the...
  5. Thread: SMB scanning

    by mincopier
    Replies
    4
    Views
    151

    Re: SMB scanning

    Here we go again.

    The TA 306ci is SMB V2 capable.

    Did you recreate the Address book or did you transfer it from machine to another using mode U917? You can export the one touch and address...
  6. Re: Calculate Cost per Copy on used Machines

    Use a spreadsheet. A column for yield and one for cost. Third column insert a formula dividing one by the other to get you cost per copy. Then at the bottom of the cost per copy column get the...
  7. Replies
    4
    Views
    190

    Re: Copier NIC or wall port??

    Check to see if there is a place in the network settings for the ethernet on the copier that you can change the speed of the port. Taking it to 10Mb half duplex or full duplex may solve the issue. ...
  8. Replies
    12
    Views
    682

    [Misc] Re: Ricoh MPC 3503 won't login IT help

    To my knowledge the "03" series machines no longer have the ability for the Admin or Supervisor passwords if the are forgotten. The only way is with a new NVRAM. This is what I have been told by my...
  9. Replies
    1
    Views
    177

    Re: Encrypting emails on SOP devices

    In the web interface under Configuration, Security is a place for Device and Site Certificates.
  10. Replies
    27
    Views
    585

    [Error Code] Re: Kmbs 552 pagescope ssl error!

    The following is from a Konicaminolta C451 TSB so some of the wording might be different from the BH552 but should be close enough to perform what needs to be done.

    Description
    Cannot access...
  11. Replies
    4
    Views
    225

    Re: Konica Minolta 454e

    Go into Administrator mode, User Box Settings and you can turn the USB ports of completely here. Scanning is off by default. If worried people will find out how to get in and revers it just change...
  12. Replies
    27
    Views
    585

    [Error Code] Re: Kmbs 552 pagescope ssl error!

    You can ignore that error. The password is 12345678 unless it was changed. In that case you will need to go into service mode. Stop-0-Clear and choose Admin password reset. But the SSL error is...
  13. Replies
    16
    Views
    627

    Re: Ricoh 2022sp firmware and windows 10

    Though I agree with the risks of SMB1, though I have not had any of my customer's have an issue with SMB1. The bigger problem would be the customers external firewall. If a computer gets infected...
  14. Re: Windows 10 SMB scanning issue on new and recently updated computers

    Firmware, firmware firmware. Cannot stress this enough. With that being said some older machines will not work with SMBV2 even with updated firmware. This is because the manufacture has deemed...
  15. Replies
    4
    Views
    253

    Re: MPC3003 SC995-01

    Need to go into the "Super Secret" service mode to rest the serial numbers. There is a listing of three there and they all three must match up. Two of the three can be changed.
  16. Replies
    20
    Views
    1,052

    Re: Konica c284e stuck at boot screen

    It is my understanding the the "Reset Tools" are not used so that you can use a used board. Every time I have talked to tech support it has been stressed by them to no use a used board in these...
  17. Replies
    20
    Views
    1,052

    Re: Konica c284e stuck at boot screen

    You cannot swap boards between two machines. According to Konicaminolta this will mess up both machines. You must use a brand new or reconditioned board from Konicaminolta.
  18. [Misc] Re: Replacing Hard Drive in Ricoh 6501- Need Software Reload or PNP with Initialize?

    Are they the same size in GB? If they are larger than what was originally installed the machine may need a firmware upgrade to be able to see the drives. Personally the machine is now complete. ...
  19. Replies
    20
    Views
    1,052

    Re: Konica c284e stuck at boot screen

    Konicaminolta NVRAM Troubleshooting guide

    Dropbox - NVRAM_Final_1-16-13.pdf
  20. Replies
    20
    Views
    1,052

    Re: Konica c284e stuck at boot screen

    Agree that it is the SSD/NVRAM. Do not use a used NVRAM on this series. You will have two screwed up machines. It must be replaced with a brand new one from Konicaminolta. Dealer only item. Tech...
  21. Replies
    10
    Views
    516

    Re: konica minolta c451

    Check your private messages
  22. Replies
    10
    Views
    516

    Re: konica minolta c451

    The machine has lost it's setting and the initial set up must be done again. This should be done by a qualified technician.
  23. [Misc] Re: Replacing Hard Drive in Ricoh 6501- Need Software Reload or PNP with Initialize?

    Nothing special. Replace with same size and type.
  24. Re: task alfa 3051ci install waste toner container error

    This is something I have not cared for about Kyocera. Some of the smaller parts are not the easiest to find or you have to get a whole assembly to get a $5 gear.
  25. Replies
    13
    Views
    1,378

    [Error Code] Re: Scan error with smb protocol on Windows 10

    On the "e" series of these machines it is best to just upgrade to the latest firmware and not worry about a specific version.

    With that being said there have been a few windows 10 computers that...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4