Search:

Type: Posts; User: allan

Page 1 of 20 1 2 3 4

Search: Search took 0.31 seconds.

  1. Replies
    3
    Views
    266

    Re: C450 funny/challenging colour problem

    Strip clean reassemble...
    Especially ribbon cables and HV contacts.
  2. Re: Network tab missing after adding Fax and disable DHCP on Bizhub C353

    Goto windows search and type cmd then on cmd.exe right click and select run as administrator.
  3. Re: Electronic boards defect due to power breakdown

    Nice and these days it would not take much to add a cheap line monitor/data logger. Just needs to have enough memory for 3 days before a catastrophic event.
  4. Re: Bizhub c3851 prints Red/Blue when using auto color on black and white document

    The document seem to be scan in color mode so its a color document. The scanner could have been wonky...
    If you manual select grey scale from the driver does it print correctly.
  5. Replies
    13
    Views
    837

    Re: 3D printed copier/printer parts.

    Using Fusion and Slic3rPE for slicing.
    Print mostly with PLA, PETG, HIPS.

    GlueDevil superglue is some serious stuff.
    Will need to check Methylene Chloride out.
    Not sure where i would get some...
  6. Replies
    13
    Views
    837

    Re: 3D printed copier/printer parts.

    Did not come out to bad. Printed it in 2 parts and glued together.
    Will need a jig to glue them in the exact place.

    42888
    428894289042891

    Now to go scratch a drum:cool:
  7. Replies
    19
    Views
    785

    Re: C552 color registration issue

    Check the voltage levels under state confirmation under in service mode for the IDS sensors.

    Should be like 3.0 Max but more like 2.8. Both of them should be around the same value.
    The lower that...
  8. Thread: error codes?

    by allan
    Replies
    3
    Views
    227

    Re: error codes?

    Mmmotor not turning.
    Not much of a nerd can't help you there.
    Thanks Phil google does the trick.
  9. Replies
    5
    Views
    278

    Re: driver favourites + output method

    Agreed. Just setup another "printer" called by that description and setup the default.
  10. Replies
    7
    Views
    381

    [Misc] Re: Bizhub C454 Toner issue

    You know the difference between the Proteas and a samosas?

    Samosas can give you runs...


    Don't think you need the chip, but change them any way to do a "new article detection" to reset the...
  11. Replies
    7
    Views
    349

    [Dead] Re: bizhub c308 ssd part number

    Its not listed because the part needs to be requested with a reason why its being replaced.
    Manual states "contact KM tech support if the board needs to be replaced".

    So why do you need to...
  12. Replies
    7
    Views
    381

    [Misc] Re: Bizhub C454 Toner issue

    Wish i was living outside of South-Africa by mistake...

    You should be able to pop the top off and then just move the unused chip over to the old top. Super glue or something.
    The toner is the...
  13. Replies
    93
    Views
    7,275

    Poll: Re: Do you trust the media?

    Left wingers sure makes a noise.... The sound of dissonance.
  14. Re: What did you do before you were the copy guy or girl?

    Out of school started doing industrial maintenance for a Chinese bag manufacturing company. Did not understood a word of each others languages just pointed a finger and tuned me "you fixa" and it got...
  15. Replies
    13
    Views
    837

    Re: 3D printed copier/printer parts.

    Checked the video. I have a CR20 with power fail resume. Its got a V2 board and running 24V. Does not suffer from any problems.
    Got no mods done to it yet and does not seem to need any. O except...
  16. Replies
    13
    Views
    837

    Re: 3D printed copier/printer parts.

    PETG not sure how it will hold up.
    Will get some nylon soon...
  17. Replies
    33
    Views
    1,996

    [Misc] Re: Bizhub C224e Unknown Issue

    The OP dropped this thread and started this one...

    Bizhub C224e SSD Replacement
  18. Replies
    12
    Views
    699

    [Misc] Re: Bizhub C451 - Paper curling

    Its not the speed but the fuser temp.
    Would not be that bad if you start with dry paper.
    There was an exit cooling fan thing available for that machine.
  19. Replies
    13
    Views
    837

    Re: 3D printed copier/printer parts.

    Cheap ass Chinese Creality printer.
    Works OK!
    Next one i will build myself.
  20. Replies
    13
    Views
    837

    Re: 3D printed copier/printer parts.

    Forgot that i like this kind of thing. Went ape on the detail.

    428664286742868

    Not sure what kind of injection molding they used here as there is no draft to be found and very complex for...
  21. Thread: Toner question.

    by allan
    Replies
    2
    Views
    229

    [Misc] Re: Toner question.

    Thanks for the advise. Take it there is not a lot of 73xx machine still out there.
    Got an add out for them hopping someone needs them.
  22. Re: What is the dumbist customer comment/question you've heard?

    I call it a PEBCAK error.
  23. Re: What Muslims in Canada really thinl about Canada

    True look at the east side of the mediterranean sea, the cost of that area just before the revolutionary years. If someone just payed the crusaders to finish there job...
    Take Sicily for example...
  24. Replies
    13
    Views
    837

    3D printed copier/printer parts.

    So here is the first 3D printed part to be tested to see if it would work as a replacement.
    Real silly part took 3 minutes to crate the STL file, 3 more to slice it and 25min to print at...
  25. Replies
    5
    Views
    265

    Re: Konica minolta C284e

    Jou transfer belt is gefok.

    Are you a tech?
    Like said before open the door and take a look at you transfer belt.
    Best to remove it and inspect it properly.

    If you want a real bargain on a...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4