Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.86 seconds; generated 12 minute(s) ago.

  1. Replies
    9
    Views
    170

    Re: Minolta c5500ci error code - c3300

    Hows that for guessing? Were I to guess I would say that:

    1) your scanner is probably bent
    2) your CCD may be bad
    3) your scanner control board may be bad.

    Since this machine is already...
  2. Replies
    4
    Views
    276

    Re: Konica Minolta C3070 DIPSW

    Thanks. It is done. For those doing this there is a DIPSW that must be set to see the correct menu items in the Fee Collection Menu Setting Screen. It set me back about 1/2 hour. =^..^=
  3. Replies
    9
    Views
    170

    Re: Minolta c5500ci error code - c3300

    AFAIK there is no bizhub C5500ci. This model looks like the combination of a Kyocera TASKALFA 5500i, a TASKALFA 500ci, and a bizhub C550. I think your customer is confused, and you'll need to use...
  4. Re: c654 Fuster Bushing & Upper Pressure Roller?

    You're right. Often as not, the shaft is so damaged that replacement bushings and bearings are not enough. The first clue is the squeaking. The second clue is the immediate pile of rust when you set...
  5. Re: C450 funny/challenging colour problem

    This doesn't sound like a supply problem or it would affect both sides. It sounds like an image processing problem, MFPB. Keep in mind that this machine is quite elderly. How much are you going to...
  6. Replies
    13
    Views
    567

    Re: Question About Pricing A Used 3500i

    I would structure it as a short term rental month-by-month. That way when you can't fix it, you can just drop the agreement and resume with some other piece of equipment.

    As far as I'm concerned...
  7. Re: c654 Fuster Bushing & Upper Pressure Roller?

    It's the yellow square in your picture that I've see fail:

    4293842939

    =^..^=
  8. Replies
    4
    Views
    276

    Re: Konica Minolta C3070 DIPSW

    Thank for the nudge in the right direction.

    Got it (aka inf.1, inf.2, etc):
    size 1 = 10" or less (i.e. 3549 1/10th's of a mm)
    size 2 = 16.5" or less
    size 3 = 19.2" or less
    size 4 = 27" or less...
  9. Replies
    6
    Views
    300

    Re: FS-533 stapler clenched shut

    It's difficult enough to manually cycle the stapler through out on a table. I'd venture to say it's impossible in the rear of the finisher.

    If I was a fortune teller I'd say: "You've got a major...
  10. Replies
    4
    Views
    156

    Re: Edit/Delete Post

    You have about 8 hours to edit a post after you create it. After that you'll need the intervention of Aneurysm to change anything. =^..^=
  11. Replies
    4
    Views
    276

    Konica Minolta C3070 DIPSW

    Does anybody know the DIPSW to make large paper a single click? The manual is opaque on the topic. I found four different switches that sounded pertinent, but had no effect.

    If you know, please...
  12. Re: Introducing an overworked supervisor!

    Welcome! =^..^=
  13. Replies
    8
    Views
    324

    Re: C224 scanner issue

    I tried the bear hug first. It wouldn't move at all. =^..^=
  14. Replies
    8
    Views
    324

    Re: C224 scanner issue

    I'll differ from the consensus for a change:

    This is poor CCD focus. I've corrected this exact issue on a bizhub 423. Do I have photos? Yes:

    42923

    So here's the scary part: You know those...
  15. Re: FS-4200DN Command Center RX reset password

    Just the Engine Reset. =^..^=
  16. Re: Bizhub c3851 prints Red/Blue when using auto color on black and white document

    Agreed. Does this affect other documents? =^..^=
  17. Replies
    5
    Views
    301

    [Misc] Re: Custom Paper Size 12x12

    I'm pretty sure the C368 can do 12" wide, you'll just have to set up a custom paper size. I'll check later on if the is a standard paper designation that you might select (if it appears on your...
  18. Replies
    2
    Views
    176

    [Error Code] Re: C3110 error 6790

    I haven't found a good definition for the "AFE" (advanced front end optics?), but it reads like an optical shading adjustment failure after three tries.

    If re-seating connectors and cleaning...
  19. Replies
    10
    Views
    441

    Re: Paper Registration buckle adj ?

    Isn't that a DragonII?

    I had a DragonI that the customer used such poor quality paper that the registration paper dust collector was packed solid in a relatively short period of time. It would...
  20. Re: HP E7 and E8 Laserjet series background at run up

    Monocomponent or dual component? Are you sure it's not detoning of the developer that resolves the backgrounding issue? Back in the day, when we changed the developer on analog machines, we had to...
  21. Replies
    7
    Views
    428

    Re: 3252ci Wrong Paper size

    That's the first thing that I would change. Kyoceras Auto Paper Detect accurately when set to Auto Inch or Auto Metric (for metric users). They will not print faxes to trays set to a specific size,...
  22. [CQ] Re: Kyocera TaskAlfa 3050ci - Colors Denser Near Edges

    This machine is compatible with a Fiery, but it won't help very much. =^..^=
  23. [CQ] Re: Kyocera TaskAlfa 3050ci - Colors Denser Near Edges

    This machine is not a good choice for a printing business. Color accuracy is mediocre at best. For a printing business you'll need to have a Konica Minolta C754e, C658, or PRESS. The Kyocera will...
  24. Replies
    10
    Views
    441

    Re: Paper Registration buckle adj ?

    It might help to know what model you're working on. =^..^=
  25. Replies
    10
    Views
    586

    Re: Falcon 2 Open Drawer 1 message

    It's probably too late to stop you from doing this. What usually happens is that the shorted lift motor that damaged the drive circuits for tray #1 is then shifted to tray #2 and damages the drive...
Results 1 to 25 of 499
Page 1 of 20 1 2 3 4