Search:

Type: Posts; User: gideon

Page 1 of 8 1 2 3 4

Search: Search took 0.35 seconds.

  1. Replies
    7
    Views
    1,038

    Re: Toshiba 456 Firmware

    I did this and it solved the problem. Thanks
  2. Replies
    3
    Views
    609

    Re: ES 257 "Toner Cartridge Not Detected"

    Did this board solved the problem?
  3. Error "toner not recognized...." Toshiba e-studio 456

    Still have the error "toner not recognized...". I changed the logic board still error, check the firmware setting it is US (NAD).
    The 2 cartridges I tried are US OEM cartridges.
    Firmware is up to...
  4. Replies
    7
    Views
    1,038

    Re: Toshiba 456 Firmware

    Replaced the system board, it solved the soft switch problem and the 08 setting.
    Still have the error "toner not recognized...". I changed the logic board still error, check the firmware setting it...
  5. Replies
    7
    Views
    1,038

    Re: Toshiba 456 Firmware

    The original problem was soft on/off switch doesn't work, can't prosecute 05 command then it got worst and got "can't recognize cartridge" and I can't execute 08.

    At that point I ordered the...
  6. Replies
    3
    Views
    416

    Re: Taskalfa 300CI jam 31, firmware

    Thanks guys for the input.
    I'll check the connector on the power supply.
    I updated the firmware and it didn't help, the power supply sound like the problem.
  7. Replies
    7
    Views
    1,038

    Re: Toshiba 456 Firmware

    Thanks for the info, I got the firmware from Toshiba, and talked to support, hopefully it will solve the problem.
  8. Replies
    6
    Views
    744

    Re: Task Alpha 300ci

    I have a 300ci that give me J31, but it jam only when printing from the computer and only when the copier is in sleep mode.

    (I posted a question about it last week).

    Hytec support suggest...
  9. Replies
    1
    Views
    268

    Re: Taskalfa 300ci registration clutch needed

    I have the clutch now, no additional help needed.
  10. Replies
    7
    Views
    1,038

    Toshiba 456 Firmware

    Anyone can help me with update or complete new Firmware for this model?

    Thanks
  11. Replies
    3
    Views
    416

    Taskalfa 300CI jam 31, firmware

    Interesting symptoms.
    When the display is in "ready", there is no jam.
    When the display is in sleep mode always jam 31 when printing from the computer (blank sheet folded at the registration...
  12. Replies
    1
    Views
    268

    Taskalfa 300ci registration clutch needed

    If you have this registration clutch 302JZ44020 (2JZ44020) please contact me.

    Thanks
  13. Replies
    0
    Views
    185

    Kyocera Taskalfa 300ci jam 31

    I have the manual.

    The paper stock at the registration roller, no image, but never when I'm there, I run 100 sheet after cleaning the switches and no jam.
    I left the office and the customer call...
  14. Replies
    16
    Views
    725

    Re: Ricoh 2022sp firmware and windows 10

    The customer is printing to it now. He will not scan with it.

    Thanks you all.
  15. Replies
    16
    Views
    725

    Re: Ricoh 2022sp firmware and windows 10

    Thanks for the detailed answer. When you say updating the MFP do you imply to replace the copier?
  16. Replies
    16
    Views
    725

    Ricoh 2022sp firmware and windows 10

    Anyone can share the most current firmware for the 2022sp?

    The customer switch to windows 10 and he can't connect the copier to his computer.

    before I'm going there I thought to have the valid...
  17. Replies
    1
    Views
    211

    Ricoh MP C300 Fax Journal report

    How can I set the copier to print the journal with the failed communication, right now it print the journal only with the communication that are ok.

    I have the manual, went to all switches in...
  18. Replies
    0
    Views
    124

    Canon LC 3175 Laser unit needed

    I'm in need of RG9-1371 laser/scanner unit.


    Thanks
  19. Replies
    7
    Views
    796

    Re: Bizhub C220 firmware update

    Thank you very much, it is what I need.
  20. Replies
    10
    Views
    1,111

    Re: Ricoh MP C300 firmware update needed

    Update firmware and scanner works fine on windows 10.
    Thanks
  21. Replies
    4
    Views
    525

    Re: Samsung SCX-5530 "door Open"

    I didn't eliminate the HVPS, I eliminate only the switch, I'll try to swap the HVPS and see.
  22. Replies
    4
    Views
    525

    Re: Samsung SCX-5530 "door Open"

    Did you solve the this problem? How?
    Was it the HVPS?
    Thanks
  23. Replies
    4
    Views
    525

    Samsung SCX-5530 "door Open"

    I have the manual

    Display stay on "warming up please wait" and flashing once in a wile "open door"

    Turning on the main switch the ADF cycles normal, no printer engine cycle, only faint clicks...
  24. Replies
    7
    Views
    796

    Bizhub C220 firmware update

    Does anyone have the most updated firmware for the Bizhub C220?
    Thanks
  25. Bizhub C220 "please reload tray" and prints from wrong trays

    This copier has peculiar symptoms. Tray 1 and 2 roller were replaced with oem rollers.

    1 - After the machine is in standby and I copy or print it feeds the paper out and then the message comes...
Results 1 to 25 of 196
Page 1 of 8 1 2 3 4