Search:

Type: Posts; User: Terna247

Search: Search took 0.09 seconds.

  1. Replies
    2
    Views
    164

    need your help. KONICA MINOLTA

    Hi tech world I turned to you to help me upgrade
    I needed service manuals on 452 series, press 6-8000. I normally have no luck with sites asking for "sign ups"
    Thanks
  2. Replies
    12
    Views
    581

    [Misc] Re: Bizhub C451 - Paper curling

    Check the heater roller with the flexible spring, may have had a paper rolled on it, also check the gear clearance at the meshing point with the gear situated at the upper part of door. Thanks.
  3. [Misc] Re: C360 freezes up when attached to network cable.

    Seen that before, replaced the modules(memory) and was good. Try that.
  4. Replies
    6
    Views
    322

    Re: faed colours C224e

    I suggest your IDCs, clean them, make sure the shutter is working perfectly.
  5. Replies
    24
    Views
    2,328

    Re: BIZHUB 283 Default Service Mode Can't Access

    Unlock that from the administrator mode
  6. Replies
    0
    Views
    166

    Bizhub 360 series.

    360/220/280 service manuals Pls.
    Thank you.
  7. Re: Bh 451 image offsets on duplex second side

    Allan, thanks, I got one. Feed you y'all back morrow.
    Both High V. Board and roller assy.
  8. Re: Bh 451 image offsets on duplex second side

    OK I've been there but not with the primary. I did secondary transfer fine adjustments first and second, no success. Just surprise how the image formed well on the itb but passes almost straight...
  9. Re: Bh 451 image offsets on duplex second side

    OK I've been there but not with the primary. I did secondary transfer fine adjustments first and second, no success. Just surprise how the image formed well on the itb but passes almost straight...
  10. Re: Bh 451 image offsets on duplex second side

    OK I've been there but not with the primary. I did secondary transfer fine adjustments first and second, no success. Just surprise how the image formed well on the itb but passes almost straight...
  11. Re: Bh 451 image offsets on duplex second side

    Allan, bix, symthohol thanks so far
  12. Re: Bh 451 image offsets on duplex second side

    Maybe I never really explained myself; I ran some copies even the test page on the front side of the paper when I turned to run on the back side of the same paper, the image doesn't copy properly. IT...
  13. Re: Bh 451 image offsets on duplex second side

    No ALLAN. no warning codes but what I gathered is that the other technician working on the machine changed the IU CHIPS for all.
  14. Bh 451 image offsets on duplex second side

    I got a call earlier today: the machine can run simplex perfectly, but not duplex whether fed manually or automatic front and back. The face will be OK but the back kind of offsets on all colors....
  15. Replies
    3
    Views
    312

    Imaging quality failure

    Hi tech crew.... Working on this BH 550 gave series of warning codes. Got a crack down on them. Ran about 10 copies and noticed that the print quality dropped in all colours. Have only one more...
  16. Replies
    9
    Views
    548

    Re: Changing colors.

    Been there. Thanks
  17. Replies
    9
    Views
    548

    Re: Changing colors.

    No Lavind..... I did memory/HDD bus check. They were all OK thanks.
  18. Replies
    2
    Views
    299

    [Jamming] Re: 3201 Jams - C458

    Well I have there before never thought it's that a headache.... Super sketch
  19. Replies
    9
    Views
    548

    Re: Changing colors.

    Performed gradation the first time, machine normalized then started all over after three weeks... I noticed a serious tear on the transfer belt... Thought it could be it but no registration...
  20. Replies
    9
    Views
    548

    Changing colors.

    Hi I am working on this BH 203. But I got stuck when I noticed that cyan is always changing color on the sent work.... I have adjusted background voltage, Dmax. The iu is in top shape. The life cycle...
  21. Re: Bizhub C452 doesn't p-rint after Fusing repair,data light blinking,no Demo p-rint

    'I just tried to format the HDD but from Admin panel->Security the HDD setting is missed out!'

    Pluck out the NVram
    Put on the machine
    It will display a message about serial number
    Put it off...
Results 1 to 21 of 21