Search:

Type: Posts; User: Arkynsaw

Search: Search took 0.04 seconds.

  1. Replies
    2
    Views
    247

    Re: Epson WF-R4640

    Thanks Phil B , I did receive the link and downloaded the file , will get a look see and try to reply here when I get to the end of it .
  2. Replies
    2
    Views
    601

    Re: Dell 5130cdn noise tray

    So , here is the story . It came down to 3 parts , after digging through the service manual . Either the Paper Feeder Assy , Drive Assy PH , or the cassette . Decided to try the Paper Feeder Assy 1st...
  3. Replies
    2
    Views
    247

    Epson WF-R4640

    Having print quality issues , not getting good fill on the nozzle check and getting black streaks with kind of a swishy look , not consistent , like crud on the underside of the printhead . Tried...
  4. Brother MFC 8480dn ADF print quality problem

    While using the ADF , the machine will sometimes make an odd noise and then output either blank or all black pages , only very intermittently . Ran the feeder in 08 mode , no noise , paper fed...
  5. Replies
    2
    Views
    601

    Dell 5130cdn noise tray

    When using tray 1 top cassette , machine makes a ratchety noise , sounds like gears slipping . This does not happen with the 2nd /lower cassette , it sounds normal . I could not swap the cassettes...
  6. Replies
    1
    Views
    480

    [Jamming] Pro 400 Color M451nw

    Jams at exit , consistently , about 2.25 inches out of exit rollers . Sensors seemed to test fine . Replaced the fuser unit which has the 2 exit sensors , still doing the same thing . All settings...
  7. Replies
    7
    Views
    1,086

    [Jamming] Re: Pro 400 Color M451nw

    Nope , sorry , did further check , no TM or RM only an SM and I have it , HP can be truly confusing the way they now deal with service info .
  8. Replies
    7
    Views
    1,086

    [Jamming] Re: Pro 400 Color M451nw

    Nope , only a service manual for this one ,I do know that in some cases there are TM ( Troubleshooting Manuals) and RM (Repair Manuals) But as far as i know , only a service manual for this one .
  9. Replies
    7
    Views
    1,086

    [Jamming] Pro 400 Color M451nw

    Stops at exit , just out of fuser , as if it never arrived at the sensor . Very low print count on unit . FW 20130815 . Press start for reports , service page , feeds as noted above and then says "...
  10. Replies
    4
    Views
    642

    Aficio MP C2500 Black toner pump

    I just ordered one of these from my vendor , when I opened the box there was a yellow substance on the pump and inside , just a small amount , it looked like yellow toner , suspect it may be a used...
  11. Replies
    1
    Views
    245

    Sharp AR M237 fed noise tray 2

    Noise in 2nd cassette unit , can put finger on end of paper feed shaft and feel a vibrarion when the noise occurs , can push down on the feed tire with finger while feeding and noise intensifies ....
  12. HP Officejet Pro x476dw MFP Duplex unit life

    The duplex unit has a cleaning assy as part of it , is there a known likely service replacement interval ? Machine I am working on has about 83 K pages on it , the duplex unit looks a bit full, but...
  13. Xerox Workcentre WC-4250 Hangs in Loop light prints

    Still vexing me . Problem had gone away it seemed , now it has returned . Prints look light , will sometimes stop mid run and idle , stopped at one point and said toner supply failed , checked both...
  14. Replies
    2
    Views
    354

    HP Designjet 500 Noise

    Makes very high pitched noise , but only when retracting paper as in "form feed and cut" . Noise does not happen when printing or forward feeding of paper . Not a whole lot of possibilities , maybe...
  15. Replies
    2
    Views
    565

    Copystar CS-3501i Duplex jams 4411

    Getting very intermittent Jam 4411 codes only on duplex pages , simplex is working fine . Doc Feeder finishes before jam occurs , so I assume it is not part of the problem . Machine has about 200,000...
  16. MultiXpress 8123 light to blank copies/prints

    Toner is new , seal pulled , toner access on toner unit and developer unit seem to open fine . Cleaned machine up a bit , very dusty . Drum looks in good shape . Stopped mid copy , little to no image...
  17. Ecosys M6535cidn yellow background and black shadowing

    I have the parts and service info , 1st time servicing this machine , disassembled to check yellow issue . Removed toners , primary transfer unit yellow drum and yellow developer unit . Cleaned the...
  18. CS 2050 Broke front pivot point Paper conveying unit

    I need to replace the paper conveying base on this oldie , seems that part is available but looks like many of the parts that have to be moved from the old to the new piece may break or be sticky...
  19. Xerox Workcentre WC-4250 Idles during print job

    Ran various sets , 5 copies off glass , 5 pages through ADF , 10 pages with ADF to 2 sided , 5 2 sided to 2 sided - Intermittently it will stop printing and start to idle for about 30 seconds to a...
  20. Replies
    0
    Views
    1,005

    Best Budget 11x17 BW laser Copier ?

    We don't do a lot of sales , we can get most machines . I have a customer that wants a copier that will side feed , so it has to be 11x17 capable . Anyone have any ideas on if there are any good...
  21. Replies
    0
    Views
    319

    Sharp AL-2080 Op Panel Problem ?

    This machine had an H2 00 problem , pulled the fuser , cleaned the thermistor , metered it , a little over 200k ohms cold . Reassembled and attempted to enter the service mode to do reset , # ,...
  22. MX-M350N Intermittent Jamming while duplex copying

    Jams on duplex only , single side pages are feeding fine as per customer . Tried running a single 2-sided page through the ADF as a duplex page output , hoping to see a single duplex page jam , ran...
  23. [Jamming] MX-M350N Intermittent Jamming while duplex copying

    Jams on duplex only , single side pages are feeding fine as per customer . Tried running a single 2-sided page through the ADF as a duplex page output , hoping to see a single duplex page jam , ran...
  24. Replies
    0
    Views
    288

    [Jamming] Xerox Paser 7750

    Having a jamming issue with the MPT tray , the cassette works fine with all sizes of paper . When paper is fed from the MPT tray , sometimes it will feed a few pages fine , but then it will...
  25. Replies
    2
    Views
    541

    [Jamming] Kyocera Ecosys M3550idn

    I replaced the rear cover because the sensor flag in that cover that is used for duplex copies had been bent such that it was hitting other parts of the guides and wrinkling the lead edge of the...
Results 1 to 25 of 25