Search:

Type: Posts; User: prntrfxr

Page 1 of 20 1 2 3 4

Search: Search took 0.18 seconds.

  1. Replies
    12
    Views
    1,165

    Re: hp lj600 m603 smear

    Is there any grease/fingerprints on the sleeve?

    Sent from my SM-N910P using Tapatalk
  2. Replies
    4
    Views
    601

    Re: 4015-4014 formatter questions

    Using a used P4014 formatter on a P4015 will downgrade the machine to P4014 (slower). Don't do it. If you do, and it does, as far as I know, there is no fix for it.
  3. Thread: HP 4700

    by prntrfxr
    Replies
    7
    Views
    575

    Re: HP 4700

    I know this probably doesn't relate to your problem because yours is feeding, but I had one 4700 that recognized the duplex unit, had a good ETB, but wouldn't duplex at all. Turned out to be the...
  4. Replies
    0
    Views
    471

    Clearance Pricing on Sharp Parts

    Offering Clearance Pricing:

    While it lasts. Call 1 800-633-6626 for pricing. Ask for Steve Hilley

    ITEM ITMDESC
    DUNTW0617RSZZ FUSER ASSY. (SHARP ARM257/317) ...
  5. Replies
    12
    Views
    1,165

    Re: hp lj600 m603 smear

    Did you perform a half page test to rule out the cartridge?
    Did you update firmware for the printer?
    Does it happen only on that paper or does it occur with other types?
  6. Replies
    65
    Views
    5,356

    Re: what's in the tech bag

    I buy a Wiha set (HP/Toolkit from TSA world-www.tsaworld.com) that uses Drive-loc blades. It comes in a green canvas pouch with velcro closure. All of the blades are double ended. #2 and #1 Phillips,...
  7. [Error Code] Re: Constant cleaning then misprint error during print jobs

    Communication issue between the Laser Scanner and the DC Controller. Service manual says:

    54.2100 Beam detect (BD) error If the error persists, replace the DC controller.
    If the error persists,...
  8. Thread: hp 4345

    by prntrfxr
    Replies
    2
    Views
    350

    Re: hp 4345

    Go to the I/0 menu and insert the IP. Although it pretty much sets itself up when you plug it in. You can perform diagnostic tests from there too, but you will need the service manual to understand...
  9. Replies
    2
    Views
    469

    [CQ] Re: HP 3525dn Now not a duplex?

    Might have to contact HP tech support on that one. Did you read the "readme" file prior to installing firmware? Did it say anything about removing options prior to install? Changing DC Controller and...
  10. Replies
    3
    Views
    482

    [Error Code] Re: Sharp AL-1655CS

    Thanks guys. I will let him know.
  11. Replies
    3
    Views
    482

    [Error Code] Sharp AL-1655CS

    A tech buddy of mine has a problem with a Sharp AL-1655CS. I am not familiar with Sharps. The display for some reason says "UPGRADE SERVER" on the display (He does not know if it was another tech at...
  12. Thread: HP 1010

    by prntrfxr
    Replies
    2
    Views
    326

    Re: HP 1010

    There are no physical switches on HP to reset the printer. Likely it is the engine test button and is used by technicians to diagnose problems.

    Putting any toner that is substandard or even 3rd...
  13. Re: Hp laserjet 4015 image on labels skew slightly

    I reread your original post. If the labels are not skewing but the image is, maybe non standard or a bad batch of labels. Tried them in tray 1 just to see if you still have the skewing?
  14. Thread: Error 52

    by prntrfxr
    Replies
    1
    Views
    288

    Re: Error 52

    It will probably be either the Laser Scanner or the ECU. On a small machine like that it will probably cost more than replacing the machine if you buy OEM parts. Even on refurbished, by the time you...
  15. Re: Hp laserjet 4015 image on labels skew slightly

    1) Rollers Good?
    2) Torque Limiter Good?
    3) Solenoid may stick but that would give you multi-feeding. Is that what is happening? Is it feeding more than one sheet at a time? Clean off the foam pad...
  16. Re: HP LaserJet 4250n Paper Feed Drive Assembly

    More than 90% of the time it's the pad on the solenoid wearing out and causing the flapper to stick. Remove the pad and put new felt (not too thick).

    Check the bushing hasn't broken or come...
  17. Replies
    3
    Views
    758

    Canon Advanced IR C2030

    Need a service manual for Canon Advanced IR C2030 to repair in shop test machine. I would like to start with a manual before posting my problem. You guys know I help people.
  18. Replies
    17
    Views
    1,244

    Re: 4700 60.02 code, need second opinion.

    I may have missed something when scanning the previous posts, but you're saying the problem only occurs when printing from tray 1? Did you replace tray 2? It is the part that is doing the actual...
  19. Replies
    5
    Views
    487

    Re: 4015 used formatters

    I guess my message wasn't clear enough and for that I apologize. I was referring to the way techs sometimes check a problem by throwing a board in from another machine.

    That being said, it is...
  20. Replies
    4
    Views
    758

    Re: P4015 went back to P4014

    Used formatters that have already had their personalities "burned in" on the formatter will downgrade any printer you put them in. Unlike the 4240/4250/4350 printers, there isn't a known way of...
  21. Replies
    11
    Views
    3,944

    Re: M603 with 59.00.30 error

    These machines are notorious for having Formatter issues and considering what you have already tried I would lean strongly in that direction.

    The fusers not rotating by hand is not unusual. Fusers...
  22. [CQ] Re: HP color laserjet 9500 color registration

    These may sound like dumb questions, but we have no way of knowing whether or not you tried it:

    1.) Did you perform the CPR calibration 3 times from the Print Quality menu?
    2.) Did you replace...
  23. Replies
    12
    Views
    1,687

    Re: HP 4050 error 41.05

    Hmmm...been doing this job for a long time. I think the problem is everyone is thinking of the 41.3 error which is paper size error. If the paper doesn't clear the sensors at the right time it can...
  24. Replies
    5
    Views
    487

    Re: 4015 used formatters

    DO NOT install a used P401x/P4515 formatter in anything you care about. If the personality has not been blanked out and made to default (aka doesn't know what it is yet) it will downgrade the machine...
  25. Replies
    25
    Views
    2,552

    Re: Solution to clean copier machine.

    Dish detergents have ammonia, so be careful.
    Ammonia and bleach make a toxic gas. Very dangerous.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4