Search:

any help with SC411 error
i replaced the image unit with new one sam code
also the charge roll and the fuser

I think some thing with the separation

thanks

Do not format ... just delet all partition dont creat a new on

I get it i was use a 4gb sd
Then i use a 128mb
Thats do the jobe
Thanks my friend for helping

In xerox there is an edoc system
The story that i get my container i get 38 xerox machine and 20 for ricoh i get the ricoh for some one but after that he decided to cancel the order from me
So now...

Realy you are posting just to get posting points
In xerox iam a real tech but in recoh iam not thats what iam
But some one like you talking bullshit

Thanks all all is ok
At the firs time i use a 4gb sd card
Then i use 128mb that sloved the problem

Ok iam not areal tech can you help me

Dear friend
On an clear sd card i make a romdata folder insid the folder i copy the D1201496A.fwu
I push the sd caed in slot 2
And i power on the machin
But nothing happend
Any help

thank you pro
I will try it tomorrow
my Ricoh 3352 firmware system/copy is 1.07 is there any new firmware ?

best regards

i am sorry for that but when some one ask for xerox help i was help hem no mater if i know hem or not alwayes i am sharing my knowlige with others

do you have 5855 and 5845 nvm with 0 counter

try to power the xerox 700 with stop+3+power saver
if not try stop+4+power sever
if not replace the MCU

so how can i get english
i am not a ricoh tech i am a xerox tech
but i have many ricoh and i must fix the EN language

I dont have this option
I have just franch and span language
Where can i find a firmware dataroom

To format HDD take it off connect the HDD to pc and format
When problem with SD you will get a white screen

Can you share with me

Befor that you can try to take out the fiery RAM and the fiery Card out make a slots clean then try again

Try another USB
If not
Try to format HDD and altboot with 71.xxx.xxx
Firmware if all ok upgrade to 72.xx
Then to 73.xx

Yes you can and you can do that without chip
But the fuser cleaner will not rounding to clean
If thats ok send to me the xerox S/N
And i will send to you the code

I did not replace anything even i did not take tha back cover out
its just a software i used same SIM

its the duplex motor he need to replace the motor the motor place like in the picture in my past post

i think you are posting just to get a posting points

sorry for late response

as the pecture

you can reset as you like but before that make an nvm save and restor
in try 1 at the right side there is an hidden place cover
just take out the cover maybe the xerox tech put the activation sim...

there is a real tech guy and there is a bla bla bla mouth
so both of you talking with minimum experience
i change the speed without new sim card and i reset the counter

405944059340595