Search:

Type: Posts; User: RHodg57

Page 1 of 6 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    4
    Views
    69

    Re: Poor Color Prints on heavy paper

    I used the same paper on our machine here and it printed fine.

    I know there was a change at some point in the IT belt They went with

    a thinner belt, but I don't remember the reason.

    I did...
  2. Replies
    4
    Views
    69

    Poor Color Prints on heavy paper

    IRADV C5030 Seems to be only on heavy paper. The samples shown are blue but it does the same with any color or black.

    I am thinking IT belt, fusing or transfer. Seems to be only one side of the...
  3. Replies
    2
    Views
    79

    Re: Inner finisher F-1 gripper assembly

    Found the part number. FM4-9101. Any other suggestions on that error code?
  4. Replies
    2
    Views
    79

    Inner finisher F-1 gripper assembly

    Getting e-532-001 codes and jams with this inner finisher F-1. It acts like the gripper assembly is not getting out of the way of the stapler unit. Does anyone have the part number for that gripper...
  5. Replies
    1
    Views
    159

    Ir1025 waste toner full/replace drum unit

    i have been working on these for years and have not seen such a stubborn intermittent problem.

    It gives the waste toner full message. New drum did not help. Replacing the sensor didn't work.

    I...
  6. Replies
    8
    Views
    737

    Re: Windows 10 Home scan to file not working

    And this solved not being able to scan to file?
  7. Replies
    8
    Views
    737

    Re: Windows 10 Home scan to file not working

    Do you know which version? I will update it with what I have.
  8. Replies
    1
    Views
    254

    Re: Canon IR Advance C5051

    Possibly bad toner. I have had that happen with a few machines. Vacuum out toner hopper and use fresh toner.

    I have had the ghosting effect you described and it was the toner. Also had toner that...
  9. Replies
    8
    Views
    737

    Windows 10 Home scan to file not working

    Customer upgraded to a laptop with Windows 10 Home. Now they can't scan to file. Their Windows 7 computer worked

    just fine. The copier is an IRADVC5035. I have seen some threads here but not for a...
  10. Replies
    3
    Views
    182

    Re: IRADVC 2030 Fax ring count

    Thanks, the customer went with a new phone system and now they can't receive faxes. The people who

    sold them the new phone system said to change the fax to 2 rings. It didn't help.
  11. Replies
    3
    Views
    182

    IRADVC 2030 Fax ring count

    I saw some threads about older machines on how to change the ring count. Does anyone know how to do that

    with the Imagerunner Advance C 2030?
  12. Replies
    3
    Views
    313

    Re: Canon IR1435 fixing films

    Tried to order those updated springs and it said no longer

    available. Did they change the number again?
  13. Replies
    3
    Views
    313

    Canon IR1435 fixing films

    We have a few of these we sold and recently with low meter machines we have had problems with fixing films tearing and

    the lower roller getting damaged on the front side. I have seen a couple...
  14. Apple IPad OS upgrade IOS11 cannot print to Canon IRADVC5051

    Got a call from a customer who prints to their Canon IRADVC5051 with IPADS. Worked just

    fine until Apple came out with an updated OS. The IPADS they have that still have IOS10 print

    fine. The...
  15. Replies
    8
    Views
    567

    Re: IRADVC5051 One Path DADF double feeds

    I replaced the torque limiter with the part number FC7-2494. The roller I used was the FB5-6586. I didn't adjust the

    spring pressure. I ordered the other torque limiter FC8-5907 that was...
  16. Replies
    8
    Views
    567

    Re: IRADVC5051 One Path DADF double feeds

    The machine has the DADF-W1 and Color Image Reader M1. Those don't show up on that tech pub.

    Not sure if the update parts listed are for this document feed. Hadn't heard any complaints for 6...
  17. Replies
    3
    Views
    330

    Re: Installation of a DADF-AB1 on to a IR2525

    Thanks!! I had ordered the wrong reader glass and cover.
  18. Replies
    3
    Views
    330

    Installation of a DADF-AB1 on to a IR2525

    Trying to install a DADF-AB1 on to a IR2525 that was sold without the DF. I have the reader glass and plastic glass retainers but I do not have the metal crossmember or the side retainer part/parts....
  19. [Wanted] COIN OP INTERFACE FOR CANON IRC2880i TO CONNECT WITH JAMEX COINOP

    Canon no longer sells the interface kit for attaching a Jamex coinop to a Canon IRC2880i.

    The Canon part number is 1782B001AA. Does anyone have one or know where one

    can be purchased?
  20. Replies
    7
    Views
    417

    Re: IRADV C2230 Intermittent Black Background

    Follow up on this thread. Copier was making background with all colors. Some solid and some just bars.

    Put a dc controller in it from another machine and the problem has went away. Hopefully this...
  21. Replies
    7
    Views
    417

    Re: IRADV C2230 Intermittent Black Background

    I switched laser units and installed new drum unit. I checked that metal contact for the drum. Cleaned toner off of it.

    Thanks Ernesto!!. Just waiting to see if the problem is solved. Of course...
  22. Replies
    7
    Views
    417

    IRADV C2230 Intermittent Black Background

    Copier is making a black background intermittently. I have replaced the drum unit and it seemed like that

    took care of it. Anyone had this problem with this model?
  23. Auto Gradation frequency on a Canon iRADVC2230

    Customer has had an IRADVC2020 for quite awhile but recently purchased an IRADVC2230 from us. They commented that it seems to go into auto gradation adjustment more often than their older machine....
  24. Replies
    4
    Views
    199

    Re: Inner Finisher F-1

    I started to reseat the connectors on the control board and discovered a damaged connector with a broken wire. The connector

    for the tray. All makes sense now except how it got damaged. Anyways,...
  25. Replies
    4
    Views
    199

    Re: Inner Finisher F-1

    I had tried that with a known working tray and no luck. It's weird that it will go down but not up. Have had inner finishers for

    years and never seen one do this.
Results 1 to 25 of 140
Page 1 of 6 1 2 3 4