Search:

Type: Posts; User: Brian8506

Page 1 of 20 1 2 3 4

Search: Search took 0.17 seconds.

  1. Ir 3300 is showing white (erasing) streaks

    I donít see any samples. If youíve replaced all that then you may have a laser problem. Have you checked to see if the laser glass was clean? If youíre getting that rotation the laser may need to be...
  2. Re: Ir 3300 is showing white (erasing) streaks

    Drum


    Sent from my iPad using Tapatalk
  3. Re: Canon IRA C2225 with light magenta strioe i=on side of copy/print

    You probably need to clean the laser glass. There is a procedure to use the tool mounted on the inside of the front door but I have found itís easier to just take the laser out and clean the glasses...
  4. Re: canon ir 7105 duplex paper crumbling issue

    That top plastic guide does warp. I have had to replace that for jamming in that area. There is a heavy spring on each end that may cause it to warp overtime. Those rollers also get slick And need to...
  5. Replies
    1
    Views
    118

    Re: Canon 3235i Dv

    Service mode-copier-function-toner/s-ok. Hopper will fill dv unit
  6. Replies
    2
    Views
    243

    [Misc] Re: IR 3230 Blurr Dispaly in Display Panel

    I would start with the lcd


    Sent from my iPad using Tapatalk
  7. Replies
    3
    Views
    160

    Re: Canon part question

    You are correct. The FM1-A719 is more coarse


    Sent from my iPhone using Tapatalk
  8. [Error Code] Re: Error code 00061-0001 on my Canon IR 6000

    Charge corona problem or drum screw is loose


    Sent from my iPhone using Tapatalk
  9. Replies
    4
    Views
    628

    Re: Canon IR1023 paper size detection

    Registration clutch may be hesitating. Print user data list. They're framed and you can see if the registration is varying
  10. Replies
    3
    Views
    396

    [Misc] Re: Ira4025 fax rings

    Found it. Service mode/fax/NCU/auto RX/007 change to required number of rings


    Sent from my iPhone using Tapatalk
  11. Replies
    3
    Views
    264

    Re: Canon IR2200 parts

    Use the 3570 pad. FL2-0963. You just need to add the spring mount underneath


    Sent from my iPhone using Tapatalk
  12. Replies
    3
    Views
    396

    [Misc] Ira4025 fax rings

    Is there a way to change the number of rings for an incoming fax from 2 to 4?


    Sent from my iPhone using Tapatalk
  13. Replies
    5
    Views
    634

    Re: Ask Part Number of this item

    I saw that number in a post on the knowledge base for a 0045 jam code problem on the 6055 so I think it is but not 100% sure


    Sent from my iPhone using Tapatalk
  14. Replies
    5
    Views
    634

    Re: Ask Part Number of this item

    I didn't see it in the book but I did in a TP. It may be FK2-7765-000
  15. Replies
    3
    Views
    341

    Re: IR3300 developer unit problem

    Are you sure thereís toner in there? Did you by chance make any adjustments to the doctor blade? I wouldnít if I were you


    Sent from my iPad using Tapatalk
  16. Re: Canon IRA C2225 Blank Streak on Copies/Prints

    Did you clean the laser glass. There is a procedure for that, not sure of the specifics.
  17. [Jamming] Re: Looking for CANON ir2200 DADF-H1 sep pad FF6-1291

    You can use the 3570 pad fl2-0963. You just need the spring support mount underneath. I use those even before the ff6-1291 was discontinued


    Sent from my iPhone using Tapatalk
  18. Replies
    2
    Views
    338

    Re: Ir1730 Skewing on 2 sided

    Replaced the entire door assembly from a scrap machine and that fixed it so I know itís on the door but donít know what. If I ever figure it out i will repost


    Sent from my iPad using Tapatalk
  19. Replies
    2
    Views
    338

    Re: Ir1730 Skewing on 2 sided

    Transfer mount did not fix it. Still looking for ideas. Only 2nd side skews.


    Sent from my iPhone using Tapatalk
  20. Replies
    2
    Views
    338

    Ir1730 Skewing on 2 sided

    Seen this a couple times before and changed the whole door assembly from another machine to fix it but I gotta figure out whatís causing it. I think itís as itís coming down underneath the transfer...
  21. Replies
    2
    Views
    227

    Re: Canon IC D1550 Error Code E000

    That may be similar to some newer that reset differently. It may be clear/engine if it has that option


    Sent from my iPad using Tapatalk
  22. Replies
    1
    Views
    187

    Re: canon imageclass mf6550

    That's a system software problem. You can try to hold down the 1 & 9 key and turn machine on. Hold them down until machine initializes. It may happen again though.
  23. Replies
    4
    Views
    439

    Re: Intermittent bands in ir6570

    Corona wires. Height of wires. What have you done so far?
  24. Replies
    2
    Views
    236

    Re: IR3530 jamming on letter only

    That's an older model. What color are the vertical rollers? There was a door, guide and vertical roller update for that problem. If you apply pressure to the side doors, you may find it feeds letter....
  25. Replies
    4
    Views
    452

    Re: Compatible gpr16 toner

    I've used a lot of their toners for many years. The GPR16 gave me trouble from the start and I stopped using it long ago.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4