Search:

Type: Posts; User: guitar9199

Page 1 of 19 1 2 3 4

Search: Search took 0.10 seconds.

  1. Replies
    6
    Views
    86

    Re: C454e dropping large print jobs

    Not for nothing....but check and see what PORT they're using to print from. If they're using the "WSD" type of port, I've seen those drop in mid-job a few times. I'd verify they're using a Standard...
  2. Re: Canon IRA C5045 uploading color profiles.

    You'd be uploading the profile to the computer....not the printer.

    Here's some light reading for you....

    Canon DLC: Article: Integrating Third-Party ICC Profiles into Your Printing Workflow
  3. Replies
    6
    Views
    543

    Re: Riso RZ220 eouter setup

    I'd check the spec sheets.
  4. FYI: Not an "OFFICIAL" fix, but it works....

    Good Afternoon True Believers,

    We just retrieved an MP 3053 from a fairly abusive environment... (3 broken bridge unit covers, one broken finisher cover, 3 broken fuser pressure arms, etc...) and...
  5. Replies
    8
    Views
    343

    Re: Canon Ir adv 8205

    1. Check the connection of the Pre-exposure LED (connector
    connection, open circuit, the caught cable).
    2. Check the installation of the Primary Charging Assembly
    (connector connection, open...
  6. Replies
    6
    Views
    543

    Re: Riso RZ220 eouter setup

    I'd check the specs to verify that the RZ-220 actually has PostScript! If it doesn't have it, your data light will flash, and the job will not print.

    FYI... With a Mac, it doesn't matter whose...
  7. Replies
    15
    Views
    528

    Re: Advance C250if drum counter

    I see the problem.... In the right column, "Expected Life" is set to zero. If I remember correctly, that part is rated for either 150K or 500K.

    (It's been a while since I looked those up.) If...
  8. Re: [MP 402spf] Printer requesting Bypasstray paper

    If the machine is requesting paper from a specific tray, the customer has set the parameters of the document to ask for it. If you change a document properties in Adobe, Word, Excel, etc... it WILL...
  9. Replies
    8
    Views
    262

    Re: eStudio 357 F101_4 error

    Attempted the recovery steps in the Service Manual... it came up ONCE after initializing the /work partition, then crashed again. F101, F105 and F106 errors. Guess the hard drive is next.


    It...
  10. Replies
    8
    Views
    262

    eStudio 357 F101_4 error

    Hey gang,

    I've got a Toshiba I'm going to see in the morning with a hard drive (F101) error. I'm going to attempt to recover the partition, but if that fails I know I'll need to replace the HDD. ...
  11. Replies
    11
    Views
    337

    Re: Account track on Mac

    +1 on CUPS... Just remember the first time you make any changes, the computer is going to ask for the User ID/password..... this is the same one you use to log into the Mac you're working on. Once...
  12. Replies
    11
    Views
    337

    Re: Account track on Mac

    This is a page showing how to configure User ID/Locked Printing on a Ricoh with a Mac, but I think this should get you in the ballpark.

    Good luck.

    Configuring locked print and adding user code...
  13. Replies
    65
    Views
    2,087

    Re: Hurricane Florence

    Is Florence working for UPS now?

    LOL!! ....Be careful brother!
  14. Replies
    4
    Views
    168

    Re: Ir3530 power problem

    Try starting the machine in self diagnostic mode (power on with 2&4 held down until "Box Checker" is displayed - about 20 seconds). If you still have nothing, it's likely your low voltage power...
  15. Replies
    4
    Views
    168

    Re: Ir3530 power problem

    After the machine stops making startup sounds, can you press the start button and make a copy?
  16. Replies
    16
    Views
    401

    [Misc] Re: MPC3502 VOIP Not Receiving Faxes

    It's entirely possible... But you won't know until you plug in a telephone into their line and listen for noises, strange tones, or even someone voice!! (I've seen that before too!)
  17. Replies
    38
    Views
    97,348

    Re: MPC2500 firmware upgrade procedure

    You should probably start a new thread for this question... The one you're replying to is YEARS old.
  18. Replies
    40
    Views
    2,157

    Re: Broken Fuser gears 2075- MP 8000

    I just rebuilt a 301 fuser on Monday... That was LOTS of "No Fun"!
  19. Replies
    6
    Views
    157

    Re: iR2380 yellow lines

    On the back rail, there's a little "Kickstand" to hold the ITB cover up while you're working on the machine.

    Word of caution.... When reassembling, make SURE you latch the ITB cover down securely...
  20. Replies
    7
    Views
    252

    Re: Ricoh MP 7502

    Something else to check into are the paper sensors. I had one where the Cassette 1 paper out sensor would hang JUST enough to make the machine think it was out of paper...even though the tray was...
  21. Replies
    6
    Views
    254

    [CQ] Re: red is orange

    Color Theory 101!!

    ....I dang near fell asleep reading all that stuff!
  22. Replies
    16
    Views
    401

    [Misc] Re: MPC3502 VOIP Not Receiving Faxes

    This is the lost of settings I use for VOIP faxes on a Ricoh/Savin.


    1. Deactivation of JBIG - Encoding
    SP 1-104-001 ( COM SW 00 ) Bit 0 to 0 / Bit 2 to 0
    2. Changing the DIS - Block length to...
  23. Replies
    4,080
    Views
    558,752

    [Funny] Re: Joke of the Day

    "I don't drink water!!
    People bathe in it, and fish make love in it!"

    -W.C. Fields
  24. Replies
    65
    Views
    2,087

    Re: Hurricane Florence

    I went through the floods here in Nashville in 2010. Some of our customers suffered a total loss... including one where you could see the water-line on the drywall, and it was about 2-3 feet ABOVE...
  25. Re: How to supress PM Part messages at end unser computers

    For the most part, it's a printer driver issue. It's not AS bad on Windows machines, and turning off SNMP helps... but you can't do much of anything about it on a Mac. Apple is such a "Closed Ship"...
Results 1 to 25 of 460
Page 1 of 19 1 2 3 4