Search:

Type: Posts; User: Desert Rat

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. [CQ] Re: BHC452 "The color is off, I wanted a different shade of purple", she said.

    Synthohol and Comptech,
    That sounds easy if your familiar with that end of the machine. I would have to convince the
    customer to pay for the fiery and get help to set it up. I could probably find...
  2. [CQ] Re: BHC452 "The color is off, I wanted a different shade of purple", she said.

    It's a small church so I don't believe they will spend the money.
    I guess they will just have to make due with the colors they can get.

    Thanks Cat
  3. [CQ] Re: BHC452 "The color is off, I wanted a different shade of purple", she said.

    :confused:
    All you guys just went over my head. Glad when I can retire.
    At least I knew it was an IT or set up problem.
    All I can do is get an IT tech friend of mine and see what he can do.
    :o...
  4. Replies
    6
    Views
    394

    Re: MP6001 HDD SC860 and SC870 codes

    Here's how that turned out. I just got lucky. I went in the back of the warehouse and he
    had just gotten in an 8001 and a 7001. Both with high meter counts, but the 7001 had
    the HDD still in...
  5. Replies
    6
    Views
    394

    Re: MP6001 HDD SC860 and SC870 codes

    Slimslob,
    Thank you for the fast reply. Does it need two HDD's?
    I think I can find the screws and rubber bushings in the warehouse.
    And I tried to leave you a message but your inbox was full and...
  6. Replies
    6
    Views
    394

    MP6001 HDD SC860 and SC870 codes

    I bought this machine from a warehouse. It seems to run well.
    It only has 320K on the meter. As I was checking it out I noticed
    that the finisher icons were not select-able.
    Looking in the back...
  7. [CQ] BHC452 "The color is off, I wanted a different shade of purple", she said.

    A nice lady at my church account mentioned this last year too. I cleaned things then and ran the auto gradation and adjusted the
    cyan density. My target looks real good. The process gray came out...
  8. [Jamming] Re: MP6002 doc fdr jam code J056 registration senor off, but it works?

    And I happen to carry a sharpie. Good suggestions both.:)
    Funny, this is the second machine this customer bought new from me.
    The first a 7502. Had very few problems. They kept it for 11 years,...
  9. [Jamming] Re: MP6002 doc fdr jam code J056 registration senor off, but it works?

    Thank you Slimslob,
    I found that very thing out today after cleaning the one way bearings. It still gave the same code.
    So, thinking I had a flaky sensor I swapped the registration sensor with...
  10. [Jamming] MP6002 doc fdr jam code J056 registration senor off, but it works?

    Here's what it does, it will start out running fine, then as the day goes on it stops and displays the code.

    Here's what I've done. I ran a 15 page set. On the third time I ran it, the code came...
  11. Thread: IR 4251

    by Desert Rat
    Replies
    7
    Views
    414

    Re: IR 4251

    Phil B.
    That's the first thing I do, then start over if the problem is still present. I know that when the primary roller in the drum gets dirty both sides
    tend to be lower in density.

    DR
  12. Replies
    12
    Views
    1,732

    Re: C3220 Bypass Paper Detect

    Brian8506 & Screwtape,
    Thanks for this post and solution. I am getting the same message on an IRA4225. As I read your posts,
    I referenced the svc manual and found my solution also.
    Reading on,...
  13. Replies
    4
    Views
    504

    [CQ] Re: BizHub C452 aftermarket toner?

    copyman
    Been there, done that, more than once or twice. But I do have a time & material customer running
    aftermarket toner in a Canon IRC2550. I just sold him the machine last year. I had some...
  14. Replies
    4
    Views
    504

    [CQ] Re: BizHub C452 aftermarket toner?

    Thanks for the reply Blazebusiness. And thanks for mentioning ACM, I use to use those guys. Don't remember
    why I stopped. I will look them up again and see what they have.

    But I agree it's...
  15. Replies
    4
    Views
    504

    [CQ] BizHub C452 aftermarket toner?

    For the most part I prefer OEM toners. But I find myself looking to save a few
    bucks on the toner. I was thinking of getting some from Precision roller.
    Most of the time they stand behind even...
  16. Replies
    2
    Views
    490

    [Error Code] Re: IRC2550 error code E-00067-0101

    Thanks Roho,
    That was my gut feel at first but I prefer some confirmation before I spend the customers money.

    DR
  17. Re: Canon IR C3480 Error Code: E000025-0000

    Here's a tech letter about your code. Hope this helps.

    DR

    4006840069
  18. Replies
    2
    Views
    490

    [Error Code] IRC2550 error code E-00067-0101

    Not sure about this code. Last week I installed a used cyan drum and got this code.
    Put the old one back and it went away. Same thing with the magenta drum.
    I originally went to change these two...
  19. [CQ] Re: ES855 weak solids that have a slight mottle look

    Vincent128,
    Thank you for all that info. I may have that 6530 manual.
    I will review that section. Even though this is a color machine, I assume they all
    use pretty much the same process for the...
  20. Re: MFC 8910 Runs 1 page ok, run three pages and it jams.

    Thank you all for your replies. I will be getting into this machine tonight or tomorrow.
    I will post the info requested. And yes pulling the covers off and watching it run will
    be the next step. ...
  21. [CQ] Re: ES855 weak solids that have a slight mottle look

    Vincent128,
    Thank you for your reply. The PM numbers, I reset the counters of the items I replaced last January and then the other day
    I reset the counters for the items I replaced. I will get...
  22. MFC 8910 Runs 1 page ok, run three pages and it jams.

    I'm not real familiar with the brothers products but I do see my customers with them. And that is why I have
    this one in the shop. It's from a good customer.
    Like I said run 3 pages and it jams. ...
  23. [CQ] ES855 weak solids that have a slight mottle look

    :confused:
    Last January I replaced the drum, developer mix and primary corona wire. The copy and prints looked great.
    Last April they called for weak solids. I cleaned the scan mirrors and the...
  24. Replies
    3
    Views
    1,638

    [Error Code] Re: Konica Minolta C2861

    racefreak,
    This sounds familiar, but I can't remember what it was I did to fix it. What does the yellow look like when you run test print #53 at 255?
    This should be solid yellow.
    One time I...
  25. Replies
    7
    Views
    495

    Re: IRA C5235 usb ports.

    I did not see anything about a PS kit under counter. But I followed the instructions and got it to work.

    Thanks a bunch

    DR
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4