Search:

Type: Posts; User: pontiac

Page 1 of 17 1 2 3 4

Search: Search took 0.11 seconds.

  1. default user exposure settings Sharp MX m620

    we have a customer who would like there exposure setting defaulted to there liking which is manual mode and all the way light it works for certain id cards can default there user screen exposure...
  2. Replies
    1
    Views
    135

    ir c5051 duplex copy quality second side

    When using duplex function first side is normal second side is light. Copy quality is the same weather using adf or placing on glass. We swapped out transfer belt ,drums and developer units for...
  3. Replies
    3
    Views
    390

    Re: toshiba es 556 duplex

    Thanks for reply. We swithced out the complete fuser transfer drawer.and solved issue . The plastic transport section under transport belt had a crack.
  4. Replies
    0
    Views
    4

    copystar 6500i slow print

    Making copies or internal prints come out at normal speed when a file with multiple pages either 3 or 20 pages therte is a 10 second delay before next page is printed. When sending print job to other...
  5. Replies
    3
    Views
    390

    toshiba es 556 duplex

    When using duplex funtion the paper drops straight down in duplex tray i thought maybe door was warped and swapped same problem i checked both door sensors ok no problem with one sided print or...
  6. Replies
    1
    Views
    261

    es 5008A ADF MR- 4000 CODE E718 ?

    Trying to help dealer friend i am not familar with this brand. Error code e718 is displayed along with jam indicator for adf checked paper paths checked for stuck flag levers removed front and rear...
  7. Replies
    2
    Views
    380

    3055c hard drive

    All new to us ,trying to do customer a favor hard drive error F101 code. What is the procedure for replacing hard drive. any info. Thanks for replys.
  8. Replies
    4
    Views
    463

    Re: No by pass select screen irc 5051

    Phil thanks for reply We swapped the whole rt door unit. We did not find any bypass adjustments in service manual. Thanks
  9. Replies
    4
    Views
    463

    No by pass select screen irc 5051

    Insert any size paper and the screen only displays displays[ adj guides] never switches to by pass options screen. Thanks for results
  10. Replies
    7
    Views
    709

    [Misc] Re: insert drum message Adv. irc5240/50

    HOPING iT WAS THE IMAGE UNIT REPAIR WAS 2 VISITS WITH TWO DIFERENT SETS OF USED DRUMS. JUST INSTALLED NEW ONES COULD ONLY RUN 100 LEDGER TEST PGS. WE WERE LUCKY THE CUSTOMER LET US DO THAT FOR A...
  11. Replies
    7
    Views
    709

    [Misc] insert drum message Adv. irc5240/50

    What tells the copier that drum unit is installed is it a sensor or patch on transfer belt being read. We have 4 out of nine units in our rental fleet that are displaying this message no error...
  12. Thread: jam E010 help

    by pontiac
    Replies
    5
    Views
    865

    Re: jam E010 help

    THANKS A TON EVRYONE, IT WAS THE FUSER TRANSPORT SENSOR. as soon as we got the part # part was ordered and I went out yesterday and installed believe me fingers were crossed. again thanks
  13. Replies
    2
    Views
    270

    Re: irc 5250 print from sleep mode

    thanks a million guitar9199 setting sleep mode to high from low fixed the sleep print issue again thanks
  14. Replies
    2
    Views
    270

    irc 5250 print from sleep mode

    THIS ISSUE WE HAVE NOT SEEN , WHEN COPIER IS IN SLEEP MODE  IT WILL NOT; WAKE UP TO PRINT, CUSTOMER HAS TO REBOOT COPIER THEN PRINT JOB PRINTS. THANKS FOR REPLY
  15. Replies
    0
    Views
    194

    irc 5250 print from sleep mode

    I havent seen this issue
  16. Thread: jam E010 help

    by pontiac
    Replies
    5
    Views
    865

    jam E010 help

    We are trying to help a customer who has a Toshiba ES 6560c. whether your printing or making copies any size we run jams at fuser then 010 jam code appears. copier has 600000 total prints I found...
  17. Replies
    5
    Views
    841

    setting up dv unit

    i have replace drum and dev. units i have a new toner installed just need procedure for setting toner dev unit thanks for replys
  18. Replies
    3
    Views
    632

    Re: checking and clearing jam codes Es 6550c

    1st page jam there is no time to even clear fax, print jobs as soon as ready it"s feeding paper before you start trying to clear or cancel pending jobs any way were already working on getting out of...
  19. Replies
    3
    Views
    632

    checking and clearing jam codes Es 6550c

    We are trying to solve a jam issue and need to know procedure to check and clear jams on a Toshiba ES 6550C. This is the only one we have out in the field, doing a favor for customer. We deal with...
  20. ad, c 5255- c5051 poor copy quality after 30 prints

    We have 3 copiers that have the same quality problem, after around 25 to 40 copys or prints all colors drop in quality to faded grainy quality. We have swapped entire image units, transfer belt, all...
  21. Replies
    1
    Views
    419

    canon c5255 AD2 PAPER SIZE

    Initalized copier and now 2 console cassettes display legal paper no matter what size paper is in drawer. Thanks for replys.
  22. Re: irc 5051, 5250 blk developer errors e20-430-431-440

    Thanks for replys, company finally purchasing new ones .
    .
  23. Replies
    0
    Views
    516

    xm 5170 adjust screen

    What is the precedure for adjusting touch screen. Thanks
  24. irc 5051, 5250 blk developer errors e20-430-431-440

    how sensitive are these units. i am trying to get my parts dept. to order me a new blk developer unit. for testing, instead of going back out with another used one. thanks for replys
  25. Replies
    2
    Views
    247

    Re: irc 5185 copier settings print is missing

    Thanks Brian for reply. I found the laser settings on each laser unit, The PVE-OFST setting i used from another machines settings. and customer says it looks better now than before.
    thanks again...
Results 1 to 25 of 412
Page 1 of 17 1 2 3 4