Search:

Type: Posts; User: MIKON

Page 1 of 3 1 2 3

Search: Search took 0.22 seconds.

  1. Replies
    8
    Views
    566

    Re: Ricoh Pro 907ex Problem after short

    Try unplugging connectors on power supply until machine powers up .That should bring you to the problem area.
  2. Replies
    6
    Views
    4,385

    Re: MP7502 replace cleaning web

    a mp6000 mp6001 b1404181 will work enter sp1902 web used to 0 then enter 33# that should allow counter to reach 100%
  3. Thread: mp6001 hung up

    by MIKON
    Replies
    4
    Views
    280

    [Error Code] Re: mp6001 hung up

    Clean the contacts on the dimm's
  4. Replies
    6
    Views
    415

    Re: MP7502 doc feed issue

    Clean and lube this shaft and bushing
  5. Replies
    7
    Views
    335

    Re: Pro C651 finisher shift tray full

    maybe its a paper setting try running thru bypass.
  6. Replies
    7
    Views
    335

    Re: Pro C651 finisher shift tray full

    Check the lower limit sensor.
  7. Replies
    6
    Views
    359

    Re: any idea how to solve mp6500 sc672

    Try cleaning the contacts on the Dimm .
  8. Replies
    9
    Views
    655

    Re: Mp c6502 sr4090 exit issue!!!!!

    hope this helps.
  9. Replies
    22
    Views
    2,516

    Re: Ricoh MP6002 Light prints/copies

    I had a tech that I followed that forgot to install the filter holder in the new developer and blew developer all over the dustproof glass.
  10. Replies
    10
    Views
    887

    Re: MP C6502 SC672-11

    Try cleaning the dimm memory chip' contacts
  11. Replies
    21
    Views
    1,308

    Re: SC 552 AFICIO MP 5500

    If the heater lamps are not connected to the same color on the terminal strip on the rear of the fuser you will get a code. Green to green blue to blue.
  12. Replies
    8
    Views
    573

    Re: RICOH MPC 6OOO FUSER:

    Sc540 is a fuser exit motor error.
    Check for a bind ie. seized bearing .broken bear .bad roller
  13. Replies
    8
    Views
    613

    Re: Pro 8200 Dog earing

    Check foam rollers on exit roller.
  14. Replies
    9
    Views
    1,648

    Re: MP 6002 Keeps going light

    Remove all old developer vacuum developer off mag roller clean mag roller with scotch brite pad install new developer.
  15. Replies
    20
    Views
    2,699

    Re: Ricoh MP 9002 ADF jamming

    Did you remove the assembly like in my pic and remove the pulley off the shaft or did you clean and lube it as stated in the TSB????
  16. Replies
    20
    Views
    2,699

    Re: Ricoh MP 9002 ADF jamming

    Do a search of this forum for mikon.I have a pic posted in a older post of the pulley and shaft you have to clean and lube.I tried to upload it put i couldn't upload it.
  17. Thread: MP6002 sc540-03

    by MIKON
    Replies
    12
    Views
    2,664

    [Error Code] Re: MP6002 sc540-03

    Hope this helps.
    I would try the new part numbers.
  18. Thread: MP6002 sc540-03

    by MIKON
    Replies
    12
    Views
    2,664

    [Error Code] Re: MP6002 sc540-03

    If you installed the new style motor it will short to the housing and continously run you have to change the housing or open up the slot.
  19. Replies
    6
    Views
    637

    Re: Ricoh 6002 DF Jams on mixed sizes only

    Try cleaning shaft and gear where arrow is
  20. Replies
    4
    Views
    508

    Re: Hdd error in mpc8002

    Try formatting with network cable unplugged.
  21. Replies
    14
    Views
    1,225

    Re: MPC6000 with add black toner msg. New oem toner

    Hope this helps.
  22. Thread: Ricoh MP 6001

    by MIKON
    Replies
    4
    Views
    550

    Re: Ricoh MP 6001

    Is that cross feed or paper feed direction?
  23. Thread: mp7502 sc540-03

    by MIKON
    Replies
    5
    Views
    2,453

    Re: mp7502 sc540-03

    Hope this helps.
  24. Replies
    3
    Views
    2,447

    Re: Mpc6502 .sc442-00

    I.T.B. Lift motor p/n D1361212
  25. Replies
    9
    Views
    893

    Re: MP7500 copiers problem

    Check drum drive flange for the retaining screw , it may have fell out.
Results 1 to 25 of 66
Page 1 of 3 1 2 3