Search:

Type: Posts; User: TonerMunkeh

Page 1 of 20 1 2 3 4

Search: Search took 1.01 seconds.

  1. Replies
    7
    Views
    363

    [Misc] Re: MPC3500 fuser parts

    B2234280, it's in an RTB.
  2. Re: Scans randomly going to TIF instead of PDF

    I've seen this a couple of times, if it's a SOP panel machine, people are using different apps to scan. Some people use classic scanner, other people use the smart apps and the settings are different...
  3. Thread: Smoking?

    by TonerMunkeh
    Replies
    44
    Views
    3,249

    Re: Smoking?

    In my opinion, vaping really is the best way to stop smoking. I was smoking between 20-30 cigs a day at the height of my habit, then I gave a proper vaporiser a shot, with 24mg liquid. I now run a...
  4. Re: Ricoh mpc6003 sr3140 finisher shift tray full remove paper

    Well. It turned out to be the lift brackets on the finisher shift tray were bent, the machine must have been trying to lift the tray back up when it hit something, bending the tray down.
  5. Replies
    7
    Views
    377

    Re: MP2000 Tray 2 Feed issues

    Have you actually fitted a new clutch?
  6. Replies
    10
    Views
    789

    Re: Fuser swappable?

    You can only try it, they are physically similar so theoretically it should work.
  7. Re: Ricoh mpc6003 sr3140 finisher shift tray full remove paper

    Homer did you get anywhere with this? I've got an SR3150 attached to an MPC5503 doing the same thing sorting or stapling on A3, fine on A4.
  8. Replies
    12
    Views
    857

    Re: MP-C3503 poor fusing

    What sort of things is the customer printing and onto what sort of paper?
  9. Replies
    3
    Views
    184

    Re: Ricoh MP C3501

    The assembly is D089 4551 and also requires D029 6216.
  10. Replies
    10
    Views
    418

    Re: Slow printing with scan PDF files

    Also switch off Java if it's not being used (SP5730) and use the "print as image" option in the advanced section of the Acrobat print dialogue.
  11. Replies
    20
    Views
    557

    [Error Code] Re: SC 595-16 Pro C651ex/C751ex

    PTR Separation Motor Error
    A command was received from the TDCU due to the motor error
    SC595-16 D
    􀁺 TDCU/TDRB harness disconnected or broken
    􀁺 TDCU/TDRB board defective
    􀁺 Stepper motor defective
  12. Replies
    22
    Views
    1,952

    Re: Right personality for the job?

    Campaigner. I have no idea what to campaign for, but I am one.
  13. Re: SP 5310 DN will only print from Bypass

    Check the tray set and paper level actuators underneath the machine. They are a bugger for breaking off. Has anyone changed the paper type or disabled auto tray select for tray 1?
  14. Replies
    5
    Views
    356

    [CQ] Re: Ricoh MP C307 - ITB waste buildup

    Depending on it's mileage the ITB unit will probably need replacing. There is a hell of a lot of paper fibre in that picture though, does the customer run particularly cheap paper?
  15. Replies
    2
    Views
    345

    Re: Ricoh MP 4500

    The cushioning pads on the exit unit solenoids are a classic cause of fusing exit jams.
  16. Replies
    29
    Views
    1,567

    [Misc] Re: Ricoh 2003 Colour Issues & Lines

    Your main problem is you are running this machine way, way out of it's specification. It's a low-end office MFP, not a 250,000 production print machine. The amount of toner being laid down is...
  17. Replies
    13
    Views
    604

    Re: Ricoh mpc 2003 Fuser unit

    If I were to guess they tried replacing just the sleeve itself and not the assembly.
  18. Replies
    4
    Views
    291

    Re: Ricoh d158 - Distorted

    Can you post the sample please, distorted doesn't really describe the fault.
  19. Replies
    8
    Views
    644

    Re: Working on PROC5100S series

    5200 is slightly different, PTR is now a belt, few other bits. One word of advice when servicing this machine - do the PM kits and devs when they are due. Don't run them over. They run much happier...
  20. Re: MP 7001 transfer unit solenoid strange one.

    Jams 12-14 is usually caused by the registration mylars.
  21. Replies
    8
    Views
    559

    Re: MP C4503 Poor print quality

    Memory clear the printer app and ACC it. That should sort it out.
  22. Replies
    120
    Views
    25,963

    Re: RICOH copeir monthly auto meter

    The machines can now actually do this themselves. SP5866. Set destination 1 to the email address you want to send it to, the date to 1 and the time to 12pm. Obviously GW scan to email has to be set...
  23. Replies
    8
    Views
    447

    [CQ] Re: Ricoh MP-4054 light copies

    Pull the toner hopper out. You'll probably find the supply auger is broken.
  24. Re: Ricoh mpc2003 + sr3130 = jam r1+r2 + sc724!

    Pay attention to how the old one comes out, those stapler harnesses are a bitch to fit.
  25. Re: Smart Panel 'Scan' app - Different than 'Quick Scan'

    I still find the classic scanner app so much less hassle. Set the defaults to 300dpi and Auto Colour Select, hit user, press start. That's it.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4