Xerox 700?
glennroberts50@msn.com
Thankx,
Glenn
Xerox 700?
glennroberts50@msn.com
Thankx,
Glenn
Khan
Looking for EDOC colorqube 9201/9202
Thanks
Brian
I have the Colorqube Parts & Service manuals on justmanuals.com
Paul@justmanuals.com
hi boss,
i need the service manual and firmware of xerox workcenter 128 please give me the links praveengreddy2000@yahoo.com
Thanking
Praveengreddy
Dear khan,
Can i ask from u service manual for dcc450 n dcc400 please...
Really appreciate it..
You may send to brianho23@gmail.com
Don't hold your breath, the original post was in 2009.
Kahn,
Thank you for the generous offer. Would you have a line on the manuals for the WC7830?
I have one with a blank display and all the panel lights are on. It does not respond to anything
I've done so far.
Thanks
DR
Rat, The connector on the UI is very touchy. The other end of the cable is the same. The standard connect - disconnect procedure may work, but I also used some of that goop the Parts Drop sells for connectors. Seems ok now, but the connection doesn't seem to be the most positive.
Scarecrow,
I found the manual I needed on service-manuals.com. In a PDF file.
I will have to look up the U1 reference you spoke of before I can re-seat it. Sometimes I will use CRC-226 on the
connectors after some contact cleaner. But very sparingly.
Thanks
DR
Bookmarks