Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 32
Epson R2880
Ineed a service manual for thei machine. It does nor recognize the cartridges. If i putall the cartridges it says that all the cartridges are non genuine. If i remove one, ore more cartridges, it recognize the ones mounted in the printer but then i put then all error. Could anyone help mee? I tried with genuine and non genuine cartridges, all brand new and the same err.
Thanks in advance for your suport.
-
Senior Tech
100+ Posts
- Rep Power
- 0
Did u put in the same time oem and compatibile? This usualy happend's on Epson if u have an older version of chip's on the cartridge's or u have compatible cartridge's instaled. I didn't worked on this model but i have some P50's which i did install CISS system's and when CISS board failed i did put chip's, Ver. 6. I would try harder with OEM cartrige's and maybe an firmware update and check if there isn't any broken contact betwen chip and board.
-
Trusted Tech
50+ Posts
- Rep Power
- 32
I do not find the firmware update for this model. And it is safe to do an firmware update for this model if it is not ready to print? I only tried whit ciss , OEM and refillable cartridges separate ( all 8 cartridges from the same producer ). I realy think it is an firmware isue.
Last edited by cosmin_mocanu; 07-10-2010 at 05:52 PM.
-
Trusted Tech
50+ Posts
- Rep Power
- 32
Comming back with some details. If i mount 7, or less cartridges, the printer reads the info on the cips with noo problem ( date of fabricaion, manufacturer etc). If i mount all the cartridges ink out error.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks