Thanks: 0
Likes: 0
Dislikes: 0
I have a Sharp AR M455 with a lot of copies on it. It has just started to crease the paper. It appears to be happening in or before the fusing unit. I have replaced the upper and lower fuser rollers and have replaced the paper feed rollers. I am still getting intermittent creases in the paper.
What am I missing?
Thanks for the help.
PS roller unit maybe or exit unit or shit paper. Seen all 3 cause it.
Ditto that. Check for seizing registration roller bushings, and check to see if the paper dust collector is packed full. =^..^=Originally Posted by harleyrider
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Did you replace the 4 fuser bearings when you replaced the fuser rollers?
Posting Permissions
Reply With Quote
Bookmarks