Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    MX-4100n Wont boot

    Cookr's Avatar
    Join Date
    Dec 2011
    Location
    Metro Detroit Area,MI
    Posts
    184
    Rep Power
    26

    MX-4100n Wont boot

    OK working on an MX-4100n and it was having problems with it sucking up all the Cyan DV found a solution on this wonderful site (at least I hope so) to replace the Process electrode case (part # PCASZ0312FCZ2) and the springs that go with it, so I did that but after i put it all back together when I turn it on it begins to boot up but will not finish the screen will not turn on but in the background I can see the boot screen and also something weird when I open and shut the front door the screen blinks for a split second. I've checked the wiring multiple times and i don't see anything wrong but I can not figure it out any help would be great. Thanks

  2. #2
    Service Manager 1,000+ Posts igi's Avatar
    Join Date
    Apr 2009
    Location
    ATLANTIS
    Posts
    1,507
    Rep Power
    51

    Re: MX-4100n Wont boot

    always recheck the last thing you did,
    did you do firmware upgrade?

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Oct 2014
    Location
    salisbury
    Posts
    129
    Rep Power
    21

    Re: MX-4100n Wont boot

    Quote Originally Posted by Cookr View Post
    OK working on an MX-4100n and it was having problems with it sucking up all the Cyan DV found a solution on this wonderful site (at least I hope so) to replace the Process electrode case (part # PCASZ0312FCZ2) and the springs that go with it, so I did that but after i put it all back together when I turn it on it begins to boot up but will not finish the screen will not turn on but in the background I can see the boot screen and also something weird when I open and shut the front door the screen blinks for a split second. I've checked the wiring multiple times and i don't see anything wrong but I can not figure it out any help would be great. Thanks
    Sounds like dv unit is causing short to ground. Did you try to remove dv unit and boot machine back up?

  4. #4
    Senior Tech 100+ Posts
    MX-4100n Wont boot

    Cookr's Avatar
    Join Date
    Dec 2011
    Location
    Metro Detroit Area,MI
    Posts
    184
    Rep Power
    26

    Re: MX-4100n Wont boot

    Well I removed the dv units and gave it another try and did the same thing. Going to try and swap some boards and see if anything works

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here