Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Sep 2014
    Location
    Montreal, QC
    Posts
    34
    Rep Power
    9

    MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner trouble)

    Hello Folks out there, is there a way to disable the corona cleaning function when you have an error C1-03,05,07. I need to order parts and want to resume printing for my client in the meantime.


  2. #2
    Junior Member rstarr's Avatar
    Join Date
    Aug 2011
    Location
    Port Huron
    Posts
    8
    Rep Power
    0

    Smile Re: MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner trouble)

    Grease the screw shaft that will work for a time good luck


  3. #3
    Technician
    Join Date
    Sep 2014
    Location
    Montreal, QC
    Posts
    34
    Rep Power
    9

    Re: MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner trouble)

    Thanks for the tip. I'm hoping for a softsw to disable the cleaner


  4. #4
    Master Of The Obvious 10,000+ Posts
    MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner trouble)

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,461
    Rep Power
    270

    Re: MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner trouble)

    This advice comes from one of our long time benefactors:

    Can you please drop some advice for Ben@KM regarding the polaris MC cleaning.... As long as you have the MC Units produced after April 2014 (as-per production run sticker on the box), its modded to stop C1 codes. The only other thing is making sure the CMYK process unit front & rear seal mods are also fitted to stop toner spray falling onto the MC home position sensor.

    In my personal opinion it's a bad idea to disable the primary charge cleaners. Those scorotrons get dirty, and need the automatic cleaning. =^..^=


    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #5
    Junior Member copyCyber's Avatar
    Join Date
    May 2009
    Location
    Crestview, Florida
    Posts
    6
    Rep Power
    0

    Re: MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner trouble)

    Quote Originally Posted by ben@km View Post
    Hello Folks out there, is there a way to disable the corona cleaning function when you have an error C1-03,05,07. I need to order parts and want to resume printing for my client in the meantime.
    Test command 44-28, AO and AP. Having the same difficulty. Done all recommended in the service manual. Sharp area rep on his way...


  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jul 2011
    Posts
    143
    Rep Power
    16

    Re: MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner trouble)

    We had one giving the code for cyan. We replaced the the Home position sensor located in the back on main drive. Once we got it out we found it had gotten the clear grease in it from the gears.
    Must have been to much put on at the factory. The part number is the same as one that sharp has had a big problem with.


  7. #7
    Senior Tech 100+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    167
    Rep Power
    19

    Re: MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner trouble)

    are you using the newer MX-750MK or the older MX-620MK when doing pm? this was partially addressed in the switch to 750mk due to cleaner warping. im not aware it can be disabled nor would i recommend it. I would recommend replacing with 750mk and see if that resolves.


  8. #8
    Junior Member copyCyber's Avatar
    Join Date
    May 2009
    Location
    Crestview, Florida
    Posts
    6
    Rep Power
    0

    Re: MX-6240, 7040 (Polaris) with error code C1-0X (various charger cleaner trouble)

    Quote Originally Posted by copyCyber View Post
    Test command 44-28, AO and AP. Having the same difficulty. Done all recommended in the service manual. Sharp area rep on his way...
    Final fix was to replace the AC Monitor PWB and the Program SATA.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here