Results 1 to 6 of 6
  1. #1
    Field Service Engineer 50+ Posts harps05's Avatar
    Join Date
    Mar 2012
    Location
    Australia
    Posts
    91
    Rep Power
    27

    Isn't this just the best fun.

    MX-3640

    Today I had a client call up desperately needing service. "My machine is saying jam and there is black stuff coming out the side". WTF

    Travelled over 80k's to site to see what the hell was going on.

    In the end, obviously, the transfer belt had developed a tear and had just shredded. The thing is, it worked it's way up into the fuser and concertinaed causing major damage to the fuser belt, pressure roller and destroying the separator blade.

    On a good note, the office chicks were very impressed with the way I was able to reassemble this mass of bits and get it working.

    Here's a pic of my enjoyment.

    20150917_105008.jpg

  2. #2
    Senior Tech 250+ Posts harleyrider's Avatar
    Join Date
    Oct 2011
    Location
    ,il
    Posts
    348
    Rep Power
    31

    Re: Isn't this just the best fun.

    Yep those fusers are a pain in the ass to rebuild. Alot of little pieces.

  3. #3
    Senior Tech 250+ Posts lky1978's Avatar
    Join Date
    Mar 2009
    Location
    perak malaysia
    Posts
    472
    Rep Power
    36

    Angry Re: Isn't this just the best fun.

    Quote Originally Posted by harleyrider View Post
    Yep those fusers are a pain in the ass to rebuild. Alot of little pieces.

    nightmare!!!!

  4. #4
    Junior Member
    Join Date
    Jun 2015
    Location
    Braintree
    Posts
    5
    Rep Power
    0

    Re: Isn't this just the best fun.

    Not used to seeing such a clean sharp fuser! Had a fuser rebuild yesterday and when I opened it up, it looked like it had been used for nuclear testing.

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Aug 2009
    Location
    Newry
    Posts
    262
    Rep Power
    32

    Re: Isn't this just the best fun.

    The first time I seen one of these fusers I thought what the flck. They are handy enough when you do a few. I wonder what caused the transfer belt too rip.

  6. #6
    Field Tech 500+ Posts
    Isn't this just the best fun.

    michaelc's Avatar
    Join Date
    Mar 2011
    Location
    England
    Posts
    590
    Rep Power
    37

    Re: Isn't this just the best fun.

    Sharp fuser units are not that bad. They are all the same give or take (lamps, webs, etc).

    I see a lot of people people changing whole fuser units because they are so cheap.
    It didn't say that I couldn't do it in the manual.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here