MXc300W rebooting itself

[Jhonjon]

The data light starts flashing and after about 30 seconds it switches off and then restarts with the welcome screen and comes back to ready to copy. Unplug the network cable and the machine works perfectly as a copier and a fax and does not restart itself. Plug the network cable in and within 2 minutes it starts restarting itself.


Sent from my iPhone using Tapatalk

Did you try to replace the network cable? Or test the machine connected to a laptop?!

[Leebs14]

I'm going back Monday armed with cables and a new router, one thing I haven't tried is to simply change the IP address on the machine, so I'm starting with that. I'll update you in Monday


Sent from my iPhone using Tapatalk

[ZOOTECH]

Disable WSD in the printer port settings in the Network Settings of the web page.

[Leebs14]

Ok sorted it today. Turned out to be a corrupt printer driver on one of the PCs which was sending corrupt package to the printer making it reboot. Delete and reinstall the driver and it's working fine again. Phew. Thanks for all your help.


Sent from my iPhone using Tapatalk