I have a sharp arm 450. when you turn it on, it just keep rebooting. I will appreciate the help.
I have a sharp arm 450. when you turn it on, it just keep rebooting. I will appreciate the help.
Disconnect network cable and power up.
If it does not reboot and copies then you have a bad print job in the queue that needs to be cleared.
Thanks for the help. However, the Sharp Arm 450 is not connected to the network it is being used as a stand alone copier. It was working fine then one day when it was turned on it just began rebooting.
Have you monitored the power supply outputs? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
check for power supply capasistor , is it both 10v5600uf busrted
Bookmarks