Hello, I have a Sharp MX-3100N that displays error code E7-01. The printer works fine, but every once in a while it displays this error. I checked every connection, updated the firmware, but I can't find anything wrong with the machine.
Does anyone know how to fix this?
Thank you
-Salo
“Perseverance is not a long race. It is many short races one after another.”
Sadly the manual just states it is a communication error for the MFP PWB. I've had this error on a brand new machine, had to replace the board once to fix it. No idea, what caused it. Only Sharp...
Re: Sharp MX-3100N displaying error code E7-01
Thanks, I will look the problem by replacing the card.
“Perseverance is not a long race. It is many short races one after another.”
E7-01 errors are compression decode errors. Typically replacing the HDD is the fix. Give it a shot.
Cthulhu for president! Why settle for the lesser evil?
Ok I'll try this,
let them know if I fix the problem.
thanks for you help.
“Perseverance is not a long race. It is many short races one after another.”
hey guys, I fixed the problem code E7-01, change the hard drive and followed with the same problem. finally change MFPC PWB unit and the problem was corrected.
also the problem of jam is under the registry. The MFPC PWB unit caused these failures.
thanks for you help.
“Perseverance is not a long race. It is many short races one after another.”
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks